Tender For Improvement Works To Peelamedu Corporation Urban Primary Health Center At Pioneer Mill Raod At Ward No 26 North Zone Roc No. 4916/2026/Md2
Tender Value
14.86 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
11 days left
EMD
14860
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Works To Peelamedu Corporation Urban Primary Health Center At Pioneer Mill Raod At Ward No 26 North Zone Roc No. 4916/2026/Md2
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of reinforced cement concrete complete direction as per the departmental officers |
| 2 | Dismantling of old damaged brickwork in cement mortor complete direction as per the departmental officers |
| 3 | Earth work excavation in all soils with initial lead and lift etc. complete as per direction of departmental officers |
| 4 | Desilting of existing drain complete as per direction of departmental officers |
| 5 | Conveyance of excavated earth complete as per direction of departmental officers |
| 6 | Jungle cleaning for cleaning scrub jungle complete as per direction of departmental officers |
| 7 | Providing pile foundation complete as per direction of departmental officers |
| 8 | Plain cement concrete in 1:4:8 mix using 40mm HBG Metal from approved Quarry etc complete |
| 9 | Supplying and erecting centering for sides and soffits including supports and strutting for plain surfaces such as Plain cement concrete walls etc., with all cross bracing etc., including decentering after curing period,complete complying with standard specifications, at all leads inside the building, at all heights. |
| 10 | Reinforced Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for all RCC items of work excluding centering, shuttering and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete |
| 11 | Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification |
| 12 | Flyash Brick work in cement mortar 1:5 mix (one cement five sand) using II class table molded bricks chamber burnt bricks of size 9\\" X 4 1/2\\" X 3\\" for the following including curing etc., completed. |
| 13 | Filling with Quarry Rubbish including watering and consolidation layer by layer with all incidental charges etc complete |
| 14 | Supplying and Laying Hydraulic Pressed Paver Block Providing and laying of 63 mm thick high strength ofHydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape ofapproved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications |
| 15 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting |
| 16 | .Supply and Fixing in position of Indian make White glazed earthware WASH BASIN 550mmx400mm with all accessories such as costIron brackets , 32mm dia C.P waste coupling 15mm dia G.M wheel valve ,15mm dia Nylon connection , 15mm dia Brass Nipples, 15mm C.P Pillar tap etc., complete. |
| 17 | Providing ceramic tile flooring using in CM 1:3 mix of approved colour and quality tiles of size 300 mm x 300 mm including pointing the joint etc., complete |
| 18 | Dadoing the wall tiles of size 300mm x 300mm of 25mm thick cost including laying using cement mortar 1:3 mix 20mm thick complete direction as per the departmental officers |
| 19 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by thedepartmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work complete direction as per the departmental officers |
| 20 | Providing 7 rows \\"Y\\" type barbed wire fencing over compound wall using \\"L\\" angle 50X50X6mm fixing 1.35m ht. 2.40m C/C C.C 1:3:6 mix using 20mm jelly direction as per the departmental officers |
| 21 | Supply and Fixing of M.S. Door using all round 25x25x6 mm thick cross bracing 20x6 mm M.S. Flats and M.S. sheet 18g with necessary locking arrangements including one coat of Red oxide paint (0.60 x 1.85m) |
| 22 | Supply and fixing of HDPE tank complete direction as per the departmental officers |
| 23 | Providing of galvanised iron sheets complete direction as per the departmental officers |
| 24 | Flooring with bed of cement concrete 1:2:4 (One part of cement, two parts of sand and four parts of stone jelly by volume) using 20 mm thick granite hard broken stones, all machine mixed, laid to uniform thickness of 100mm and top left rought to receive floor finish including all labour charges for concreting, ramming, curing etc, and providing expansion joints, slopes & grades if any etc., complete complying with relevant standard specifications at all leads & lifts inside the building. |
| 25 | Plastering in Cement Mortar 1:5 mix 12mm thick |
| 26 | Painting with enamel paint two coats for doors, windows, grills, weldmesh etc |
| 27 | Painting with first quality emulsion paint two coats over a priming coat including thorough cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed. |
| 28 | Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / Fan point (For Electronic regulator) SD- 16 |
| 29 | Supply and fixing of box type 4 40W flourescent tube wiring complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC un sheathed copper leads from terminals to the fitting |
| 30 | Supply and fixing of 40W street light fititng complete direction as per the departmental officers |
| 31 | Supply and fixing of 3 core 6sqmm aluminium flat cable for street light fititng complete direction as per the departmental officers Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender