Tender For Welcome Maintenance Md Accommodation At Mil Stn Kasauli Under Ge Kasauli
Tender Value
48 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
17 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance Md Accommodation At Mil Stn Kasauli Under Ge Kasauli
BOQ
| Sl. No. | Item Description |
| 1 | SCHDULE 'A' B/R PORTION |
| 2 | Material and labour for complete removal of existing treatment on surfaces of wall by using appropriate technique ( Manual or mechanical method) as approved by Engr-in-charge for complete removal of all layers of old treatment and reaching upto old plastered surface complete all as specified and directed. |
| 3 | Material and labour for 2 mm thick wall care putty on wall complete all as specified and directed. |
| 4 | Material and labour for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil bound distemper of any approved tint complete all as specified and directed. |
| 5 | Material and labour for preparation of old plastered or unplastered surfaces of walls and applying two coat of oil bound distemper of any approved tint complete all as specified and directed. |
| 6 | Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 7 | Material and labour preparation of old decorated surfaces of ceiling and applying two coat of white wash complete all as specified and directed. |
| 8 | Material and labour for complete removal of existing treatment on surfaces of wall by using appropriate technique as approved by Engr-in-charge for complete removal of all layers of old treatment and reaching upto old plastered surface and applying two coat of Acrylic Smooth exterior paint of required shade old work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 9 | Material and labour for preparation of old painted wooden surfaces of any description and in any positioin over 10 cm width or girth and applying one coat of synthetic enamel paint of tint as approved complete all as specified and directed. |
| 10 | Material and labour for preparation of old painted wooden surfaces of any description and in any situation over 10 cm width or girth and applying two coat of synthetic enamel paint of tint as approved complete all as specified and directed. |
| 11 | Material and labour for prepartion of old painted steel surfaces exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. (except roof). |
| 12 | Material and labour for prepartion of old painted steel surfaces exc 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. (except roof). |
| 13 | Material and labour for french polishing on wooden surfaces of any description,over 10cm width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats to acheive glossy finish complete all as specified and directed. |
| 14 | Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 15 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 16 | Material and labour for Brick work with old size subclass 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 17 | Demolition of cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 18 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 19 | Material and labour for 75mm thick, PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/PCC path, and paving, finished the surface even and smooth without using extra cement, joint filled with bitumen and sand mixture applied hot (area not exceeding 1.20 sqm ) , complete all as specified. |
| 20 | Material and labour for plain cement concrete, 1:2:4 type B-0 (using 12.5 mm graded mechanical crushed aggregate) for levelling course, benching, coving, roof kerbs , complete all as specified and directed . |
| 21 | Material and labour for 10mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and directed . |
| 22 | Material and labour for preparation of new plastered surface and applying two coats of oil bound distemper on wall over a coat of of chalk whiting primer complete all as specified and as directed. |
| 23 | Taking up or down 15 mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 24 | Taking up or down 20 mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 25 | Supply and fixing of 15mm dia tubes, medium grade, galvanized, ISI Marked, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing and screwing, if required for alterations and additions, complete all as specified and directed. |
| 26 | Supply and fixing of 20mm dia tubes, medium grade, galvanized, ISI Marked, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing and screwing, if required for alterations and additions, complete all as specified and directed. |
| 27 | Material and labour for disconnecting existing over head steel/PVC water tanks, setting aside (or lowering, if required) for repairs, cleaning etc and hosting if required, reconnecting and refixing in position including cleaning and removing all scale and dirt etc, from tanks and from mouth of circulating pipes etc capacity exc. 250 ltrs & not exc. 500ltrs complete all as specified and directed. |
| 28 | Material and labour for disconnecting existing over head steel/PVC water tanks, setting aside (or lowering, if required) for repairs, cleaning etc and hosting if required, reconnecting and refixing in position including cleaning and removing all scale and dirt etc, from tanks and from mouth of circulating pipes etc capacity exc. 500 ltrs & not exc. 1000ltrs complete all as specified and directed. |
| 29 | Supply and fixing, water storage tank 500 ltr capacity HDPE Triple layer, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut , ISI marked, screwed and suitable for iron pipe 20 mm bore,including taking down the unserviceable water tank and removing from site, complete all as specified and directed |
| 30 | Supply and fixing, water storage tank 1000 ltr capacity HDPE Triple layer, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut , ISI marked, screwed and suitable for iron pipe 20 mm bore,including taking down the unserviceable water tank and removing from site, complete all as specified and directed |
| 31 | Supply and Fixing in repair 15 mm dia CP Brass Wall mixer with telephonic hand shower for mixing hot & cold water screwed down Mixing valve including joints to steel pipes or unions and plugging and screwing to walls for iron pipe and fixed complete all as specified and directed. |
| 32 | Supply and Fixing in repair of Mixer 15 mm dia Brass CP mixer for WHB/sink mixing hot & cold water screwed down for iron pipe Mixing valve including three joints to steel pipes or unions and plugging and screwing to walls and fixed complete all as specified and directed. |
| 33 | Supply and fixing ( in repair), 5.5mm thick looking mirror of selected quality, beveled edge 450mmx600mm glass mounted on 6mm thick AC building board with aluminium beading and rubber packing and fixed to wall with wooden plug with chromium plated brass screw and cup washer complete all as specified. |
| 34 | Supply and fixing in repair, overhead shower rose, 125mm dia, round shape, single flow with shower arm 15 mm size, for wall mounted showers, complete all as specified and directed. Make- Cat No PSH-4407 of PRIMA or equivalent model in makes mentioned in Appendix 'B' of tender document. |
| 35 | Supply and fixing brass chromium plated tubular towel rail, 20 mm dia, ‘D’ type 60 cm long between flanges complete all as specified and as directed. |
| 36 | Supply and Fixing PVC (SWR) Floor trap plain with grating including jointing with solvent cement and fixed in repair 75 mm dia outlet complete all as specified and directed. |
| 37 | Supply and Fixing in repair, CP jet spray for pedestal pattern WC including flexible pipe and brass chromium plated nuts complete all as specified and directed. |
| 38 | Supply and fixed in repair, PVC water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated complete all as specified. |
| 39 | Supply and fixed in repair, health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 40 | Supply and fixing in repairs, vitreous chainaware, coloured, EWC pedestal pattern, floor matching 'P' or 'S' trap alongwith and including premoulded 10 litres vitreous china ware cistern, seat cover, etc. complete all as specified Make Cat No. : S1021106 of Cera or or equivalent model in makes mentioned in Appendix 'B' of tender document. |
| 41 | Supply and fixing in repair, CP brass toilet paper holder complete all as specified and directed. |
| 42 | Supply and fixing in repair, CP brass soap dish holder complete all as specified and directed. |
| 43 | Supply and Fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm making good wall by painted or distempered finish to match existing complete all as specified and directed. |
| 44 | Supply and fixing in repairs 40mm dia, chromium plated sink waste coupling with long screwed shanks and fly nuts, flangeend bedded in red lead cement and other end fixed complete all as specified and directed. |
| 45 | Supply and Fixing as in repair Vitreous China pedestal wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed . |
| 46 | Supply and Fixing in repair of 25 mm dia curtain rods, mild steel wall thickness 0.80mm, powder coated with fixing metal ornamental holder and side finals(in pair for each door and window)as approved, fixing with PVC wall plugs bracket and brass screws complete all as specified and directed. |
| 47 | Supply and fixing in repair, 10 litre capacity virgin polypropylene cistern, ISI marked, coloured at low level complete with PVC bend/flush pipe and making all connection , complete all as specified. |
| 48 | Supply & fixing (in repair), sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated guard and railing 60cm long, complete all as specified . |
| 49 | Supply and fixing as in repair wall mounted, multi utility, mirror cabinet, single door, of size 450 mm x 600 mm complete all as specified and as directed |
| 50 | Supply and fixing in repairs, corner glass shelf with 30cm in radius consisting of 8mm thick sheet glass with chromium plated bracket guard complete all as specified and directed. |
| 51 | Supply and Fixing in repair of Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),including plastic water closet seat, black, closed pattern with flat bottom and seat cover, and mild steel chromium plated or aluminised/ hinging device complete all as specified and as directed |
| 52 | Supply and Fixing in repair of Vitreous china squatting pan, \\"Orissa pattern\\" of size 680 x 470 mm white with integral foot rests(excluding flushing cistern, flush pipe and waste pipe), cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan, complete all as specified and as directed |
| 53 | Supply and Fixing in repair, 15mm bore PVC connection with brass nut of length 600 mm complete all as specified and as directed. |
| 54 | Supply and fixing in repair, bib tap, long body, screwed down, high pressure, cast copper alloy, fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union complete all as specified and directed. Make- PRIMA Cat No PLF-6202 or equivalent model in makes mentioned in Appendix 'B' of tender document. |
| 55 | Supply and fixing in repair, angle cock, 15mm dia, cast copper alloy, chromium plated, ISI marked, screwed down, high pressure with capstain head, screwed both ends for iron pipes or for unions complete all as specified and as directed. Make-Prima Art No- PLF-6205 or equivalent model in makes mentioned in Appendix 'B' of tender document . |
| 56 | Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete all as specified and as directed. |
| 57 | Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete all as specified and as directed. |
| 58 | Taking down shutters of any description but not exceeding 1.00 Sq.m each from chowkhat and removing from site complete all as specified. |
| 59 | Taking down shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each, from chowkhat and removing from site complete all as specified. |
| 60 | Taking down door/window shutters of any description of area exc 2 Sqm complete all as specified and as directed. |
| 61 | Taking down shutters of any description exceeding not exceeding 1 Sqm each and refixing in the same opening after easing, cutting complete all as specified & directed |
| 62 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and refixing in the same opening after easing, cutting complete all as specified & directed |
| 63 | Taking down shutters of any description exceeding 2 Sqm each and refixing in the same opening after easing, cutting complete all as specified & directed |
| 64 | Material and labour 2 nd class H/W, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed to door window & cupboard frame and partation wall complete all as specified and directed. |
| 65 | Supply and Fixing factory made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both side covered with veneer decorative lamination complete all as specified and directed. |
| 66 | Supply and fixing IInd class hard wood (hollock) factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. |
| 67 | Supply and fixing 30 mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. (with or without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20(b), complete all as specified and directed. |
| 68 | Supply and Fixing for 18 to 20 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces including beding fixed with screws to timber frame work complete all as specified and directed. |
| 69 | Supply and Fixing Factory made solid PVC frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, suppling and fixing in opening as per specificaiton and drawing complete all as specified and directed. |
| 70 | Material and labour for factory made solid panel PVC moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes fot top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either siude & as gap insert for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. Please Enable Macros to View BoQ information |
| 71 | Material and labour for factory made solid panel PVC moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes fot top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either siude & as gap insert for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender