Tender For Special Repair To Building No Et-18 (Or Bk) Otm Accn Of Signal Records Under Ge (East) Jabalpur
Tender Value
44.85 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
15 days left
EMD
89708
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No Et-18 (Or Bk) Otm Accn Of Signal Records Under Ge (East) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as in walls/parapet walls removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces complete all as specified and directed. |
| 2 | M&L for brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for Brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 4 | Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 5 | M&L for 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed. |
| 6 | M&L for 15mm thick rendering in CM 1:4 on concrete/brick surfaces, surface finished even and smooth without using extra cement complete all specified and directed. |
| 7 | M&L for 5mm thick rendering in Cement Mortar 1:3 on concrete surfaces, ceiling etc finished surface even and smooth, without using extra cement complete all specified and directed. |
| 8 | M&L for preparation of newly plastered surfaces and applying three coats of white wash as in ceilling complete all as specified and as directed. |
| 9 | M&L for preparing newly plastered surfaces of internal wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 10 | M&L for preparing newly plastered surfaces of external walls and applying two coats of cement base paint over a coat of primer complete all as as specified and as directed. |
| 11 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets as in roof coverings complete all as specified and directed. |
| 12 | M&L Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 13 | M&L Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 14 | Dismantling timber fillets,posts rafter purlin under 40 sqcm framed work in sectional area,complete all as specified and as directed. |
| 15 | Dismantling timber in scantling 40Sqcm and over in section framed work in any position complete all as specified and directed. |
| 16 | Dismantling wroght iron or mild steel work of any description not oterwise provide for complete all as specified and directed. |
| 17 | S&F hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe410-0 or Fe 310-0 complete all as specified and directed. |
| 18 | Fixing only wind ties complete all as specified and directed. |
| 19 | S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed other, fitted with washer and one hexagonal or square n. exc 5cm long and 5 to 10mm dia complete all as specified and directed. |
| 20 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters, fixed with angle cleats or other connecting plates of Gde Fe 410 -W (Gde E- 250)Quality - A , complete all as specified and directed. |
| 21 | S&F MS Plates (plaines or chequered) square cut or notched (forming holes with riveted,bolted or welded attechment) Fe 410 -W (Gde -E -250) qyality -B |
| 22 | S & F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed bothends,each screwed end to be fitted with washers and one hexagonal or square nut,but lenth of bolt exc 5cm but n exc 10 cm and 5 to 10mm dia complete all as specified and directed. |
| 23 | S&F steel work in tubular truss and tubular post including special shaped washer etc .complete using ERW or induction butt welded tubes conforming IS:1161-1979 grade St-240 complete all as specified and directed. |
| 24 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed Note :- Reinforcement where provided shall be measured and paid separately. |
| 25 | M&L Precast cement concrete Type B-1 1:2:4 (Using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and as directed. |
| 26 | M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 27 | M&L for Mild steel TMT bars 8 mm and over upto and including 10 mm dia in stirrups,spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 28 | Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 29 | M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed. |
| 30 | M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed. |
| 31 | M&L vitrified ceramic tiles 10 mm thick, LIGHT/DARK SHADE, (Square/rectangular) polished, area of Each tile not exceeding 0.36 Sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed. |
| 32 | M&L for Vitrified ceramic tiles 10mm thick, LIGHT/DARK SHADE, (square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm as in vertical surfaces such as in dados/skirting etc set and jointed in neat cement slury and in coloured cement to match coloured including 10mm thick plaster (backing coat) in CM 1:4 complete all as specified and directed. |
| 33 | M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) as in steps, jambs, pilllars, window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 34 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 35 | M&L for 25mm thick cement concret 1:2:4 Type B-1 (Using 20mm graded stone aggregate ) as in sub-base finished even and fair complete all as specified and directed. |
| 36 | M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base finished even and smooth complete all as specified and directed |
| 37 | Material and labour for 20- 25 mm thick machine cut kota stone flooring over cement screed base laid and jointed with neat cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick bedding layer in cement mortar 1:6 including rubbing and polishing complete all as specified.. |
| 38 | M&L for 20 to 25 mm thick machine cut kota stone as in vertical surfaces as risers of steps, skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified and directed. |
| 39 | M&L 75 mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade and three part of sand ( all by weight) complete all as specified and directed. |
| 40 | Taking down chowkhats or frame with shutter ( without taking off shutter from the frame) area not exc 1.5 Sqm Each complete all as specified and directed. |
| 41 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm Each complete all as specified and directed. |
| 42 | S&F 2nd class hardwood plain solid straight chowkhat or frame, wrought framed rebated on the solid, rounded or chamfered put together with flue pinned at joints etc and in position complete all as speicified and directed. |
| 43 | S&F Powder coated (minimum thickness of powder coating 50 micron) Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately. |
| 44 | S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed. |
| 45 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete all as specified and directed. |
| 46 | S&F steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 47 | S&F steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 48 | S&F steel windows or ventilators, fixed type with glazing bars complete all as specified and directed. |
| 49 | S&F PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specification complete all as specified and directed. |
| 50 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 51 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed |
| 52 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed |
| 53 | S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed. |
| 54 | S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed. |
| 55 | S&F mild steel cold rolled medium weight butt hinges 75mm size fixed screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge. |
| 56 | S&F continuos (piano) hinges,mild steel bright finish or electrogalvanised,width of flaps 30 mm complete all as specified and directed. |
| 57 | S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 58 | S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed. |
| 59 | S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed. |
| 60 | S&F door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width all as specified and directed by Engr-in-charge. |
| 61 | S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed. |
| 62 | S&F 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed |
| 63 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified. |
| 64 | M&L for 9 mm thick prelaminated particle board interior grade,prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work as in repair all as specified |
| 65 | M&L for 18/19 mm thick prelaminated particle board interior grade,prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work as in repair all as specified |
| 66 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified |
| 67 | S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified |
| 68 | S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in Each pane complete all as specified |
| 69 | S&F mild steel framed work conforming to Fe.290.Gde-E-165 such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified. |
| 70 | S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-290 ( Gde E-165). |
| 71 | M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed. |
| 72 | Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified |
| 73 | Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified |
| 74 | Taking down old steel tubing & connection including cleaning for refixing for 25mm or 32 mm bore pipe complete all as specified |
| 75 | S & F tubes, medium grade, 15mm bore galvanised with all fittings and fixed complete to wall (concealed) or ceiling or laid in floors complete all as specified and directed. |
| 76 | S&F tubes, medium grade, 20mm bore galvanised with all fittings and fixed complete to wall or ceiling or laid in floors complete all as specified and directed. |
| 77 | S&F tubes, medium grade, 25mm bore galvanised with all fittings and fixed complete to wall or ceiling or laid in floors complete all as specified and directed. |
| 78 | Re-fixing tubesm medium grade, 15mm bore galvanised with all fittings and fixed complete to wall (Concealed) and ceiling or laid in floors complete all as specified and directed. |
| 79 | Re-fixing tubes, medium grade, 20mm bore galvanised with all fittings and fixed complete to wall or ceiling or laid in floors complete all as specified and directed. |
| 80 | Re-fixing tubesm medium grade, 25mm bore galvanised with all fittings and fixed complete to wall or ceiling or laid in floors complete all as specified and directed. |
| 81 | M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 82 | S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed. |
| 83 | S& F in repairs Stop valve / Angle valve concealed type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed. |
| 84 | S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed. |
| 85 | S&F in repairs 15mm bore, pillar taps, fany type chromium plated, cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed. |
| 86 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 87 | S&F Soap dish, stainless steel of approx size 160mm x 160mm x 90mm complete all as specified and directed. |
| 88 | S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified |
| 89 | S&F in repair PVC connection 600 mm long, 15mm size with PTMT nuts complete all as specified |
| 90 | S&F Unplasticised PVC pipes (32 mm) of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 91 | S&F in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and directed. |
| 92 | S&F in repairs vitreous China bowl urinal flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed |
| 93 | S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms) complete all as specified and directed. |
| 94 | S& F in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed |
| 95 | S&F 600x450 bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board of commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers Complete all as specified and directed. |
| 96 | S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed. |
| 97 | M&L for 100mm dia cast iron floor trap plain with grating including jointing and fixed with cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 98 | M&L for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 99 | Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings, heads, shoes, bends, swan necks etc.including cleaning or refixing or removal to store complete all as specified and directed. |
| 100 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches ,110 mm bore complete all as specified. |
| 101 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches,75 mm bore complete all as specified. |
| 102 | S&F PVC (SWR) bends any radius 110 mm bore complete all as specified. |
| 103 | S&F PVC (SWR) bends any radius 75 mm bore complete all as specified. |
| 104 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 105 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 106 | S&F in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing complete all as specified and directed. |
| 107 | S&F in repair PTMT bottle trap ( with internal partition) 32mm bore having minimum water seal of 25mm (Minimum weight 32mm-260 gms complete all as specified and directed. |
| 108 | S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall complete all as specified and directed. |
| 109 | S&F CP waste fittings brass chromium plated for WHB/sink 32mm dia with long screws sinks and fly nuts, flange end bedded in red lead cement and other in fixed complete all as specified and directed. |
| 110 | M&L for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 111 | M&L for Preparation of newly wooden surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 112 | M&L 3mm thick wallcare putty on wall complete all as specified and directed. |
| 113 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces & also providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. complete all as specified and directed. |
| 114 | S& F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed. |
| 115 | S & F in repair Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 116 | S & F in repair Gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 117 | Dismantling exc 500 and n.exc 1000 ltr cpacity water tanks and removing to store complete all as specified and directed. |
| 118 | S&F for 2000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 25 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.Note : PVC tank shall be ISI marked and having Triple layers. |
| 119 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed. |
| 120 | S&F suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600x600mm comprising of GI powder coated main runner of dimension 39mmx24mm x 0.8mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 4mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provision of light fixture complete all as per manufacturer instructions complete all as specified and directed. |
| 121 | M & L for Machine pressed precast coloured concrete interlocking paver block M 35 grade any shape and size of 60mm thickness with grey cement and pigment complete all specified and directed. |
| 122 | M&L for 50mm thick crushed stone sand/ river sand as in cushioning layer below interlocking paver tiles well compacted to a true surface complete all as specified and directed |
| 123 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in Sub base of flooring finished even and fair complete all as specified and directed. |
| 124 | M&L Stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cmX30cmX15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, applying two coats of paints in zebra pattern as directed by Engr-in-Charge |
| 125 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed. |
| 126 | Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc complete all as specified and directed |
| 127 | Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as specified and directed |
| 128 | M & L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and directed for the following :- |
| 129 | One light point controlled by one switch. |
| 130 | One Ceiling fan/ Exhaust Fan point controlled by one switch and one regulator. |
| 131 | One 3 pin switch socket outlet point 5 Amps on independent board. |
| 132 | One 3 pin switch socket outlet point 5 Amps on same board with other switch. |
| 133 | All as per item 128 here-in-before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and as directed. |
| 134 | Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed. |
| 135 | Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed. |
| 136 | Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed. |
| 137 | Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed. |
| 138 | Supply and fix ceiling rose surface backlite 65x50 mm 3 terminals complete all as specified and directed |
| 139 | Supply and fix Modular fan regulator step down 120 Watt, 2 module complete all as specified and directed. |
| 140 | Supply and fix lamp holder PVC type with back plate for lamp holder fitting complete all as specified and directed |
| 141 | Supply and fix LED lamp suitable for B22 holder of capacity 9 Watt complete all as specified and directed. |
| 142 | Supply and fixixing LED lights fitting 1 x 20 W, 220 V, AC decorative box type with driver, holder, including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 143 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed |
| 144 | Supply and fix Vertical Distribution Board MCCBs VTPN, 4 way double door, suitable for MCCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar complete all as specified and directed. Note:- (i) MCCBs four pole shall be measured paid separately (ii) MCCB, MCB & DB shall have the same make. |
| 145 | Supply and fix MCCBs, 4 ple, 415 volts, 125 Amps, 16 KA complete all as specified and directed. |
| 146 | Supply and fix MCB, single pole, 240 volts, 6 to 32 Amps, complete all as specified and directed. |
| 147 | Supply and fix sheet metal enclosure distribution board SPN 8 way 240 volts with IP 43 protection and double door, Bus bar rating 100 Amps, suitable for mounting MCBs complete all as specified and directed. |
| 148 | Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and directed. |
| 149 | M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC concealed conduit and all accessories concealed in walls / roofs / ceiling etc. earth dolly, terminated in terminal box all as specified and directed by Engr-in-charge for the following. (a) 2x6 sq mm and 1x6 sq mm as earth wire complete all as specified and directed. Note : (i) Two runs of copper conducter and one runs of earth copper conductor and conduit shall be measured as one length |
| 150 | M & L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length fo drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed. |
| 151 | Supply and fixing of LED Street lighting 35W LED IP66 New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 35W LED 6000K complete all as specified and directed. |
| 152 | Material and labour for street light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including MS clamps made out of 25mmX3mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size including painting with one coat of aluminium paint over a coat of red oxide / primer all as directed. |
| 153 | Supply and fix storage type geyser of capacity 25 ltr 220 volt single phase AC supply, in metallic body five star rated energy efficient including grouting on bolts/studs in wall and making good all as specified and directed by Engr-in-charge. |
| 154 | Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed. |
| 155 | Supply and fix of exhaust fan, steel body AC single phase. 230 V of size 300 mm sweep with, blades, frame and louvers and including making of holes in wall, floor etc all as specified. |
| 156 | Supply, laying and Testing of underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 4 core cable including taking down unserviceable cable complete all as specified and as directed. |
| 157 | Excavation in trenches not exceeding 1.5m in width and not exceeding 1.5m in depth and getting out in any type of soil complete all as specified and as directed. |
| 158 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed. |
| 159 | Removal of excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifieds and directed. |
| 160 | Supply & laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specifieds and directed. Note: Punned thickness shall be measured. |
| 161 | M & L for unreinforced precasted concrete cable cover class LV, type 1,flat , size 250mm x 150mm x 40mm complete all as specifieds and directed. |
| 162 | Material and labour for GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 80 mm dia complete all as specifieds and directed. |
| 163 | Material and labour for cutting of bituminous road / floor / culvert / PCC hard standing for laying of pipe / cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick complete all as specified and directed. |
| 164 | Schedule of credit amount of Rs 1,61,240.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender