Tender For Special Repair To Building No Et-11 Of Signal Records Under Ge (East) Jabalpur
Tender Value
2.90 Crore
Estimated cost
Bid Submission
19 Oct 2026
15 days left
EMD
58172
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No Et-11 Of Signal Records Under Ge (East) Jabalpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Oct-2026 | NIT Corrigendum | Other | 19-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as in walls/parapet walls removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces complete all as specified and directed. |
| 2 | M&L for brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for Brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 4 | Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 5 | M&L for 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed. |
| 6 | M&L for 15mm thick rendering in CM 1:4 on concrete/brick surfaces, surface finished even and smooth without using extra cement complete all specified and directed. |
| 7 | M&L for Preparing Newly plastered surfaces of internal wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 8 | M&L for preparing newly plastered surfaces of external walls and applying two coats of cement base paint over a coat of primer complete all as as specified and as directed. |
| 9 | Preparation of old decorated plastered/un-plastered surfaces of any height of walls of any description, pillars, cornices by brooming washing, rubbing down and stopping of distempered and painted surface wire brushing, scrubbing down smoke, soot, mould moss and efflorescent, salts, trading oil and greasy spots and applying two coat of white wash (lime) complete all as specified and directed. |
| 10 | M&L for 3mm thick wall care putty on wall complete all as specified and directed. |
| 11 | Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces & also providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 12 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets as in roof coverings complete all as specified and directed. |
| 13 | M&L Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 14 | M&L Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 15 | Dismantling timber fillets,posts rafter purlin under 40 sqcm framed work in sectional area,complete all as specified and as directed. |
| 16 | Dismantling timber in scantling 40Sqcm and over in section framed work in any position complete all as specified and directed. |
| 17 | Dismantling wroght iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 18 | S&F hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe410-0 or Fe 310-0 complete all as specified and directed. |
| 19 | Fixing only wind ties complete all as specified and directed. |
| 20 | S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed other, fitted with washer and one hexagonal or square n. exc 5cm long and 5 to 10mm dia complete all as specified and directed. |
| 21 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters, fixed with angle cleats or other connecting plates of Gde Fe 410 -W (Gde E- 250)Quality - A complete all as specified and directed. |
| 22 | S&F MS Plates (plaines or chequered) square cut or notched (forming holes with riveted,bolted or welded attechment) Fe 410 -W (Gde -E -250) qyality -B complete all as specified and directed. |
| 23 | S & F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed bothends,each screwed end to be fitted with washers and one hexagonal or square nut, but lenth of bolt exc 5cm but n exc 10 cm and 5 to 10mm dia complete all as specified and directed. |
| 24 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed Note :-Reinforcement where provided shall be measured and paid separately. |
| 25 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 26 | M&L Precast cement concrete Type B-1 1:2:4 (Using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and as directed. |
| 27 | M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 28 | M&L for Mild steel TMT bars 8 mm and over upto and including 10 mm dia in stirrups,spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 29 | Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 30 | M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed. |
| 31 | M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed. |
| 32 | M&L Double charged Vitrified ceramic tiles dark shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloure of tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed. |
| 33 | M&L Double charged Vitrified ceramic tiles dark shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured including 10mm thick plaster (backing coat) in CM 1:4 complete all as specified and directed. |
| 34 | M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 35 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 36 | M&L for 25mm thick cement concrete 1:2:4 Type B-1 (Using 20mm graded stone aggregate ) as in sub-base finished even and fair complete all as specified and directed. |
| 37 | M&L 75 mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade and three part of sand ( all by weight) complete all as specified and directed. |
| 38 | Taking down chowkhats or frame with shutter ( without taking off shutter from the frame) area not exc 1.5 Sqm Each complete all as specified and directed. |
| 39 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm Each complete all as specified and directed. |
| 40 | S&F Powder coated (minimum thickness of powder coating 50 micron) Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid separately. |
| 41 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed. |
| 42 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and directed. |
| 43 | S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified and directed. |
| 44 | S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in Each pane complete all as specified and directed. |
| 45 | S&F mild steel framed work conforming to Fe.290.Gde-E-165 such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primercomplete all as specified and directed. |
| 46 | S&F framed work confirming to FE-290 ( Gde E-165) as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. |
| 47 | Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified |
| 48 | Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified |
| 49 | Taking down old steel tubing & connection including cleaning for refixing for 25mm or 32 mm bore pipe complete all as specified |
| 50 | S & F tubes, medium grade, 15mm bore galvanised with all fittings and fixed complete to wall (concealed) or ceiling or laid in floors complete all as specified and directed. |
| 51 | S&F tubes, medium grade, 20mm bore galvanised with all fittings and fixed complete to wall or ceiling or laid in floors complete all as specified and directed. |
| 52 | S&F tubes, medium grade, 25mm bore galvanised with all fittings and fixed complete to wall or ceiling or laid in floors complete all as specified and directed. |
| 53 | M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 54 | S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed. |
| 55 | S& F in repairs Stop valve / Angle valve concealed type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed. |
| 56 | S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed. |
| 57 | S&F in repairs 15mm bore, pillar taps, fany type chromium plated, cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified. |
| 58 | S&F Soap dish, stainless steel of approx size 160mm x 160mm x 90mm complete all as specified and directed. |
| 59 | S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified |
| 60 | S&F Unplasticised PVC pipes (32 mm) of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 61 | S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms) complete all as specified and directed. |
| 62 | S&F 600x450 bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board of commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers Complete all as specified and directed. |
| 63 | S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed. |
| 64 | M&L for 100mm dia cast iron floor trap plain with grating including jointing and fixed with cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 65 | M&L for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 66 | Taking down eaves gutters and rainwater pipes (any size or pattern ), including all fittings, heads, shoes, bends, swan necks etc.including cleaning or refixing or removal to store complete all as specified and directed. |
| 67 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches, 110 mm bore complete all as specified and directed. |
| 68 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches,75 mm bore complete all as specified and directed. |
| 69 | S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed. |
| 70 | S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and directed. |
| 71 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 72 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 73 | S&F in repair PTMT bottle trap ( with internal partition) 32mm bore having minimum water seal of 25mm(Minimum weight 32mm-260 gms complete all as specified and directed. |
| 74 | S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and directed. |
| 75 | S&F CP waste fittings brass chromium plated for WHB/sink 32mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed complete all as specified and directed. |
| 76 | M&L for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 77 | M&L for Preparation of newly wooden surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 78 | S& F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed. |
| 79 | S & F in repair Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 80 | S & F in repair Gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 81 | Dismantling exc 500 and n.exc 1000 ltr cpacity water tanks and removing to store complete all as specified and directed. |
| 82 | S&F for 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, including 25 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed.(Note : PVC tank shall be ISI marked and having Triple layers.) |
| 83 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed. |
| 84 | S&F suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600x600mm comprising of GI powder coated main runner of dimension 39mmx24mm x 0.8mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 4mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provision of light fixture complete all as per manufacturer instructions complete all as specified and directed. |
| 85 | S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing all as specified& directed. |
| 86 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make frame as per specification and drawing complete all as specified and directed. |
| 87 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid in cement mortar complete all as specified and directed etc. |
| 88 | M & L for Machine pressed precast coloured concrete interlocking paver block M 35 grade any shape and size of 60mm thickness with grey cement and pigment complete all specified and directed. |
| 89 | M&L for 50mm thick crushed stone sand/ river sand as in cushening iolayer below interlocking paver tiles well compacted to a true surface complete all specified and directed. |
| 90 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in Sub base of flooring complete all as specified and directed. |
| 91 | M&L Stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cmX30cmX15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, applying two coats of paints in zebra pattern as directed by Engr-in-Charge |
| 92 | Taking down light fitting any type and any capacity of wattage complete including fitting anf fixture removal of material fot taking credit and making good distrubed surfaces of wall , floors, roofs etc complete all as specified and directed |
| 93 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed |
| 94 | Taking down fan sealing cable end, dismantling blades and removing fan and blades complete all as directed by Enge In charge. |
| 95 | Hanging only fan (M D Sully) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed |
| 96 | M & L Painting of ceiling fans complete, in situ with one coat synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust complete all as specified and directed |
| 97 | Supply and fixing multi core round pvc insulated aluminium cable conductor (flexible) industrial cable PVC sheathed cables, 1100 volts conforming to IS 694 of size 2.5 sq mm , 3 core from point to light fitting of inside /outside pole complete all as specified and as directed |
| 98 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed |
| 99 | Schedule of credit amount of Rs 89,995.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 15 daysOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender