Tender For Provision Of Hardstanding Parking With Overhead Shed At 31 Repair Renovation And Special Repair Of 02 X Swts (T-210 & T-210A) At 14 Corps Under Ge 865 Ews, Leh
Tender Value
16.79 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
11 days left
EMD
33600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Hardstanding Parking With Overhead Shed At 31 Repair Renovation And Special Repair Of 02 X Swts (T-210 & T-210A) At 14 Corps Under Ge 865 Ews, Leh
BOQ
| Sl. No. | Item Description |
| 1 | M & L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil. |
| 2 | M&L Hardcore with broken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 15 cm thick, water and rolled /rammed to a true surface. |
| 3 | M&L for Cement concrete type B-2,1:4:8 (40mm graded crushed stone aggreate) 75 mm thick as in sub -floors , sub- bases ,floors and pavings,etc. |
| 4 | M & L for 100 mm PCC 1:3:6 type C-2 using 20mm graded crushed stone aggreate as in floor of hard standing finished even and smooth with out using extra cement all as specified. |
| 5 | M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in floor surface of hard standing . |
| 6 | M & L for removing excavated soil material n, exe 50m and depositing where directedat a level n, exe 1.5 m above the starting poit complete all as spfd. |
| 7 | M & L for excavating in post holes (or similar holes) each n exc 0.5 cum in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface. |
| 8 | M & L for PCC (1:4:8) type D-2 using 40mm graded crushed stoneaggregate as in foundation,filling and mass concrete all as specified. |
| 9 | S&F Structural steel works as in tubular roof trusses, purlins, Rafter, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats , riveting incl bending and welding, conforming to Fe – 410W Gde E -- 250 quality A complete all spd and as directed. |
| 10 | S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, cleats, MS Flat, MS plate, rivetting etc n.exc 10 kg each brackets, conforming to FE 290 Gde E-165. |
| 11 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of sand (desert) colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 12 | M & L for two coat of synthetic enamel paint over one coat of red oxide priming including preperation of new steel surfaces over 10 cm width or grith not otherwise described. |
| 13 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed |
| 14 | M & L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles as directed. |
| 15 | M & L 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes as directed. |
| 16 | M & L for EPDM (Ethylene propylene diene monomer) water proofing membrance of 1mm thick on vertical/horizontal surface having temperture stable capcity 45 Degree to -130 Degree complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F MS ties for fixing of membrance at top, securing bolts, posts & struts including cutting tops to shapes as directed,including all necessary drilling,bolting or reveting etc and similar work confirming to Fe-290, Gde-E-165 complete including dismantling all as specified and as directed. |
| 18 | Deduct Schedule of Credit of Rs (-) 400.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender