Tender For Addn/Altn Of Room No-01 To 10 At Single Offrs Accn Inside Bldg No O-12 At Vijay Durg Under Ge(Vd) Kolkata
Tender Value
43 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
14 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addn/Altn Of Room No-01 To 10 At Single Offrs Accn Inside Bldg No O-12 At Vijay Durg Under Ge(Vd) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | (B/R PORTION)Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed. |
| 3 | Supply and fixing factory made uPVC white colour Sliding window Three track , made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 4 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 5 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 6 | M&L for applying two or more coat of french polish including preparing, claening the new surface and applying wood filler on new wooden surfaces of any description over 10cm width or girth complete all as directed. |
| 7 | S&F hold fast for window doors, made to shape as required all as directed at site complete all as specified and directed. |
| 8 | S&F 5.5 mm thick toughened frosted glass fixed in Upvc beads (beading included with shutter ) or as in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed. |
| 9 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete all as specified and as directed. |
| 10 | M&L 10 mm thick cement plaster on brick or concrete walls in CM 1:6 complete all as directed. |
| 11 | M&L 5 mm thick cement plaster on brick or concrete walls in CM 1:3 complete all as specified and directed. |
| 12 | M&L for capplying two or more coats of oil emulsion distemper over one coat of primer to new surfaces of wall over 2mm thick putty complete all as specified and as directed . |
| 13 | M&L for capplying two or more coats of oil emulsion distemper over one coat of primer to new surfaces of ceiling over 2mm thick putty complete all as specified and as directed . |
| 14 | M&L for complete removal of existing treatment and applying two or more coats of oil emulsion distemper over one coat of primer and 2mm thick wall care putty to old decorated surfaces of wall complete all as specified and as directed . |
| 15 | M&L for complete removal of existing treatment and applying two or more coats of oil emulsion distemper over one coat of primer 2mm thick wall care putty to old decorated surfaces of ceiling complete all as specified and as directed . |
| 16 | Supply and fixing in repair 35mm dia gold line curtain rod alongwith decorative brackets and supporting and rings at a gap of 4\\" (Make : Vista sher wood) glass fixed with necessary beading complete all as specified. |
| 17 | M&L (in repairs) for Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work( as in cup board) INCL taking down old one complete all as specified and directed. |
| 18 | S & F Continuous (piano) hinges in brass bright finish ,width of flap 40 mm complete all as specified and directed. |
| 19 | S&F 40mmdia , cupboard knobs fixed with nut, screw and washer in brass polished and bright finished complete all as specified and directed. |
| 20 | S&F multi purpose cupboard lock ( Brass finish) of 65 mm size in 4 lever complete all as specified and directed. |
| 21 | S&F cupboard magnets heavey duty complete all as specified and directed. |
| 22 | S&F fancy type 100 mm Extruded brass handles, fabricated type polished complete all as specified and directed. |
| 23 | (E/M PORTION ) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 24 | (E/M PORTION ) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender