Tender For Special Repairs To Building No T-4 (Adm Block) Of Mh Pulgaon.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Oct 2026
14 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Building No T-4 (Adm Block) Of Mh Pulgaon.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof overingscomplete all as specified |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 3 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified |
| 4 | Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per direction by Engr In Charge. |
| 5 | S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc confirming to Fe 410-W (Gde- E- 250) quality -A complete all as specified. |
| 6 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 7 | M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed. |
| 8 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed by EIC. |
| 9 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 10 | M&L for Armstrong false ceiling with GI based powder coated steel snap grid frame work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with hangers 2-3mm dia GI wire adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long or hooked to roof with needful adjustement bolts at an interval of 1.20 m centre to centre staggered and board with Gypsum board decorative type size 600 x 600 x 8/9 mm thick fixed to steel frame work. |
| 11 | M&L for PVC insulation panels 10mm thick with EPS stuck to 1mm printed PVC sheet suitably placed and including in grid for wall panalling/false ceiling made of Aluminium/G.I./M.S. as approved by GE incl hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 12 | S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 13 | Providing and fixing 10mm thick plaster of paris (POP) ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) |
| 14 | Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level. |
| 15 | M&L for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection , finished fair and even, without using extra cement.complete |
| 16 | M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases/floors/pavings etc complete all as specified and as directed. |
| 17 | Material & labour for Glozy finish concrete coloured chequered tiles with pigment of size 300 mm x 300 m x 25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed. |
| 18 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes. |
| 19 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed . |
| 20 | M&L glazed coloured ceramic tiles 600 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed . |
| 21 | M&L Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 22 | All as item No (21) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified. |
| 23 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified. |
| 24 | S & F machine cut cudappah stone slab 20.25mm thick polished one side for kitchen platform over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing complete all as specified and as directed. |
| 25 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 20mm screed bed CM 1:6. incl demolition complete all as specified and as directed. |
| 26 | Demolition of reinforcement cement Concrete of any description and in any position (reinforcement cut as required to facilitte demolition) all as specified and as directed. |
| 27 | M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed.Note :- Reinforcement shall be measured and paid for separately. |
| 28 | M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified. |
| 29 | S&F for cup board/cabinet hinges full overlay or half overlay type fixed with stainless steel screws complete all as specified and directd |
| 30 | S&F of 18mm MDF on both side laminated (prelam sheet) for Shelves White in kitchen cabinets/Cupboards etc. as per approved manufacturer,s specification premium quality including all fittings complete all as specified and as directed. |
| 31 | Demolition of brick /stone masonary built in cement mortar including all quoins arches, pillars and precast concrete articles all as specified and as directed. |
| 32 | M and L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 33 | S&F for Precast cement Concrete louvres and jallies, 35mm thick Type B0 (1:2:4) using (12.5mm aggregate ) including all mouldings but excluding frame (measured solid), set in cement mortar 1:6 |
| 34 | Taking down of chowkhats or frames not exc 1.5 sqm each (with out taking off shutters from the frame) complete. |
| 35 | Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed by EIC. |
| 36 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 37 | S&F for Factory Made Solid PVC Moulded Door Shutter With Particle board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing |
| 38 | S& F in repair for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 39 | S&F for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 40 | S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in charge |
| 41 | S&F for Sheet glass 5.50mm thick, selected quality and glazing with oil putty in square n exc 0.5 sqm in each pane |
| 42 | M&L for second class hard teak wood Plain, solid teek wood, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed |
| 43 | Supply & Fixing 35 mm thick 1st class hard wood (Teak wood) Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats |
| 44 | Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 1st class hardwood (Teak wood), open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated without sash bar as in doors, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed. |
| 45 | S&F for Toughened glass 12mm thick frameless door & fixed with statinless steel handle 250mm long, SS hinges and corner SS cleats, piots, mortice lock, plain/frosted glass as per site requirement complete all as specified and directed. |
| 46 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed. |
| 47 | M&L for Preparation of wood or wood based new or untreated Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthatic enamel paint over a coat of pink primer. |
| 48 | M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats |
| 49 | Supply & Fixing 100mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 |
| 50 | Supply & Fixing 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed |
| 51 | Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC. |
| 52 | Supply & Fixing 150 mm long Brass handles, cast type, polished bright |
| 53 | S& F in repairs 375mm long Brass, sliding door bolt with sand or diecast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed |
| 54 | S& F in repairs Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified. |
| 55 | S& F 3.50 mm thick sheet figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 56 | Supply & fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified. |
| 57 | Material & Labour for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 58 | S&F in repairs 20mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge. |
| 59 | S&F in repairs 15mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge. |
| 60 | S&F in repairs stainless steel 25mm dia curtain rod including SS brackets fancy type 02 Nos each rod with fixing brackets, stops, rollers etc |
| 61 | S&Fin repairs rotational moulded polythylene water storage tanks 1000 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge |
| 62 | S & Fixed in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gms,complete all as specified and directed by Engineer-in-Charge |
| 63 | S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge. |
| 64 | S&F in repairs vitreous china wash down water closet pan (Padestal pattern), white (CAT Pot No FLS-WHT-5953BIUFPM Make -JAQUAR), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. (Make : JAQUAR as approved by GE) |
| 65 | S&F in repair for concealed type flushing system metal body in wall mounted with push button chromium plated, screwed for iron pipe and fixed as per manufacturer instructions complete all as specified and directed. |
| 66 | S&F in repairs Brass chromium plated bottle traps 40mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed |
| 67 | S&F in repairs CP gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge |
| 68 | S&F in repairs vitreous China wash hand basin oval type top counter of Size: Counter Top Basin, Size: 600x400x185 mm white CAT pot No SLS-WHT-6601 (Solo) including waste coupling 40mm, including cutting for and pinning in ends of brackets or fixed with bottle traps complete all as specified and as directed. |
| 69 | S&F in repair for CP Pillar Cock with Extension Body CAT pot No VGP-CHR-81021N make - Jaquar complete all as specified and as directed. |
| 70 | S&F in repair stop/angle valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed. |
| 71 | S & F in repairs mirror of with Border lights Twin - LED Mirror - Warm Light - Round/Square size 600X750mm or as per site requirement of selected quality glass, frameless and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 72 | S&F repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge |
| 73 | S&F in repairs for Towel Rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed. |
| 74 | S&F in repairs Long Body CP Bib Cock with Wall Flange 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed, Make - Jaquar CAT pot No OPP-CHR-15037PM as approved by GE |
| 75 | S&F in repairs Towel Rack 600mm Long with Lower Hangers, Stainless steel Chrome finished fixed with rahul pulg as per manufacuturer instructions. CAT Pot No AKP-CHR-35781PS Make - Jaquar |
| 76 | S&F in repair Tumbler Holder - Chrome finished CAT pot No- ACN-CHR-1141N, Make- Jaquar |
| 77 | S&F in repair Toilet Roll Holder Hotelier Series AHS-CHR-1551 - Chrome Finish make - Jaquar |
| 78 | S&F in repair Soap Dish Holder - Chrome Finish CAT pot No AKP-CHR-35731P make - Jaquar |
| 79 | S&F in repair Health Faucet with 1 meter flexible pilpe Chrome Finish CAT pot No ALD-CHR-573 make - Jaquar |
| 80 | S&F in repair Pegset of 6 series Chrome Finish fixed with rahul plug and screws etc complete all as directed. |
| 81 | S&F in repair Glass Shelf 600mm Long - Chrome Finish CAT pot No - ACN-CHR-1171N make - Jaquar fixed with rahul plug and screws etc complete all as directed. |
| 82 | S&F in repair Corner Glass Shelf - Chrome Finish 250mm CAT pot No - ACN-CHR-1173 make - Jaquar fixed with rahul plug and screws etc complete all as directed. |
| 83 | Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints. |
| 84 | S&F in repair GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste |
| 85 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement. |
| 86 | M&L for preparing surface of wall priming plastered and other surfaces with one coat wall care putty priming paint over two coats of Oil bond Distermper complete all as specified. |
| 87 | M&L for preparing surface of wall priming plastered and other surfaces with two coat of acrylic exterior emulsion paint over one coat of wall care putty than one coat of primer etc complete all as specified. |
| 88 | M&L Complete removal of existing treatment on old surfaces on walls and applying two coats of distermpering on walls with distemper oil emulsion over a 3mm thick wall care birla white putty complete all as specified |
| 89 | Complete Removal of existing treatment on walls including removing dirt, nails, making good holes cracks etc brooming down with steel wire brushing scrapping down smoke soots etc and applying Two or more coats of weather proof exterior acrylic emulsion paint (Appex or equavalent) including providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 90 | Demolition of CI/AC/PVC 100/75mm dia pipes jointed in cement mortar and taking from trenches including all type of bends/branch pieces complete all as specified and as directed. |
| 91 | M&L for PVC (SWR) pipes single socket in any length with rubber ring joints , laid in trenches or in floor , dia of bore 110 mm complete all as specified and as directed. |
| 92 | -Ditto- all as per above item but for 75 mm dia |
| 93 | S&F for stack clamps made out of 25mmx3mm thick flat iron made to shape as directed incl plug and screws for securing ends of stay to for sanitary pipe fore 75/100mm bore dia of pipe including taking down old clamps etc complete all as specified and as directed. |
| 94 | S&F in repair 75mm dia of PVC nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and as directed. |
| 95 | PVC (SWR) bends any radius ,dia of bore 110 mm complete all as specified and as directed. |
| 96 | All as per item No 95…... but 75 mm bore |
| 97 | S& F PVC(SWR) junctions single (Single T) equal or unequal, dia of bore 110 mm complete all as specified and as directed. |
| 98 | PVC (SWR) vent cowl , bore 110 mm complete all as specified and as directed . |
| 99 | Taking down carefully concealed/casing capping point wiring copper/aluminium(light/fan/socket) complete (with fittings such as switches ceiling rose, pendents, regulators,sockets etc) and making good disturbed surface with existing specification all as specified and directed by Engineer-in-Charge. |
| 100 | Material and labour for point wiring complete with 1.5 sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of code red, blue and yellow for phase, black for neutral and green for earth of ISI marked drawn through and including PVC conduit concealed of suitable size with accessories ISI marked on wall/ceiling including PVC insulated copper cable FRLSH 1100 V grade multi stranded for earth continuity conductor of same type and size and connected to earth dolly including provision of MODULAR boxes of suitable size MODULAR boxes,cover plate for mounting switches/sockets and regulators complete all as specified and as directed. (a) One light point controlled by one switch one way |
| 101 | All as per item No 100.. but One Ceiling fan/ Exhaust fan point controlled by one switch one way |
| 102 | All as per item No 100 But Using 2.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable for 3 pin 6 Amp socket outlet controlled by one switch on same board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and directed . |
| 103 | All as per item No 100 But Using 2.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable for 3 pin 6 Amp socket outlet controlled by one switch on independend board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and directed . |
| 104 | All as per item No 100 But Using 4 sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable for 3 pin 16 Amp socket outlet controlled by one switch on independend board with 4 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and directed . |
| 105 | S&F in replacement Modular switch one way, 6 Amps, 240 V complete all as specified and directed |
| 106 | S&F modular socket outlet 2/3 pin type,6 Amps, 240 V complete all as specified and directed |
| 107 | S&F socket outlet modular but 6A/16A flush,2 module type complete all as specified and as directed. |
| 108 | S&F switch modular 15/16A complete all as specified and as directed. |
| 109 | S&F in replacement lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed |
| 110 | S&F call bell electrical operated complete all as specified and as directed |
| 111 | S&F fan regulator modular type 120w 2 module complete as specified and directed. |
| 112 | S&F ceiling rose surface type with 3 terminals complete . |
| 113 | S&F in replacement to LED street light fitting 35 Watt 230 volt AC outdoor type with high pressure die cast housing and heat resistance with complete with driver ,lamp with bracket with impact and corrision resistance including thermal management in multiple optics complete with IP -65/66 protection complete all as specified and directed. |
| 114 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 115 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type (Cat Ref: LCTLRF3-36-CDL,LCTLRF5-36-CDL,LCTLRF6-36-CDL) with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engr-in-charge. |
| 116 | S&F in replacement LED tube light lamp ,220 V AC LED Tube Light Color Cool White Wattage 22/25 W Ultra Lumen 100-130 Lm/W Color Temperature 6500k Housing Material Extruded Aluminium with connecting up with 3 Core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 117 | S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 8 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces complete all as specified and directed. |
| 118 | S&F in repairs of sheet steel enclosure with Double door TPN 4 ways 440 volt factory fitted rated bus bars,earth bar,neutral links complete including blanking plates as required and making good the disturbed surfaces all as specified and as directed. |
| 119 | S&F in replacement of MCB SPN 40Amps 240V ,50 Hz ,breaking capacity 10 KA,\\" C \\" series complete all as specified and directed. |
| 120 | S&F in replacement of MCB SP 06-32 Amps 240V ,50 Hz, breaking capacity 10 KA,\\" C \\" series complete all as specified and directed. |
| 121 | S&F in replacement of MCB TPN 63 Amps 415V ,50 Hz ,breaking capacity 10 KA,\\" C \\" series all as directed. |
| 122 | Supply and fix in replacement of 9 watt LED Bulb retrofit type complete all as specified and directed |
| 123 | Material and labour earthing complete with galvanised earth plate electrode 60cmx60cmx6mm thick buried directly in ground not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to galvanised earth lead 4 mm dia by means of bolts, nut check nuts and washers of galvanised iron or steel, earth lead protection pipe 15mm bore GI medium grade, watering pipe 20mm bore GI medium grade all as shown in electrical plate No 3 connected to main switch distribution board complete and testing on completion all as specified and directed by Engr-in-Charge. Note : (i) The unit rate shall also includes for excavation earth work, type of soil, pit in PCC 1:3:6 type C1 funnel with watering pipe from earth test point upto equipment to be earthed, RCc 1:2:4 type B1 cover for earth chamber, 50mm thick with 8mm dia for steel 150mm C/C both ways and 6mm dia MS round bars at handles of cover slab all as specified in addition to sl No 1 (a) to (e) and 3 of under sub heading earthing as specified on ser page No 441 of SSR Part-II-2010. (ii) The rate shall be deemed to include for taking out existing earthing complete. |
| 124 | Supply and fix exhaust fan made of sturdy Engineering plastic AC single phase 230 Volts of size 250mm sweep with blades and louvers complete all as specified and directed including necessary arrangement in wall for fixing the exhaust fan in Bathroom including making hole,connection with 1.5 sqmm FRLS cable from near ceiling rose. |
| 125 | Supply and fixing ceiling fans complete with blades, down rods, clamp,and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6 BEE. Five star rated with brushless direct current motor (BLDC) hanging complete all as specified and as directed.Note:- Price includes taking out of OLD UNSV fan from site and deposit to AGE E/M store yard as directed by Engr In charge. |
| 126 | Supply and fix wall mounting fan made of polypropelene complete with inbuilt regulator and accessories, 300mm Sweep, 230Voltage single phase supply complete all as specified and directed by Engineer-in-Charge. |
| 127 | S&F Mcb Protected Switch socket combination with sheet metal box MCB Protected Modular Socket 2 pin with earth with plug & socket, Short circuit breaking capacity, 3kA(MCBs) used for AC, Washing Machine, Oven, Geyser, etc., Mounting type: Either Concealed or Surface, with 20A 3 pin top, 20A SP MCB, 20A Socket complete all as specified and directed Please Enable Macros to View BoQ information |
| 128 | S&F Mcb Protected Switch socket combination with sheet metal box MCB Protected Modular Socket 2 pin with earth with plug & socket, Short circuit breaking capacity, 3kA(MCBs) used for AC, Washing Machine, Oven, Geyser, etc., Mounting type: Either Concealed or Surface, with 20A 3 pin top, 20A SP MCB, 20A Socket complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender