Tender For Special Repair Of Building No P-439 (Cook House No Five) Of 257 Transit C Under Age B/R-I Of Ge 865 Ews, Leh
Tender Value
32.64 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
16 days left
EMD
65300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Building No P-439 (Cook House No Five) Of 257 Transit C Under Age B/R-I Of Ge 865 Ews, Leh
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 2 | M&L for 10mm thick rendering on other than fair faces of Stone wall works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed. |
| 3 | M&L for 10mm thick rendering on other than fair faces of Stone wall works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and as directed. |
| 4 | M&L Rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar (1:4), complete all as specified. |
| 5 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 6 | M&L for 1mm thick wall care putty, complete all as specified and directed. |
| 7 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified and directed . |
| 8 | M&L for preparation of newly plastered surfaces of wall by applying wall care putty averaging thickness 1mm and rubbing with sand paper for making smooth surface and applying two coat of oil emulsion distemper over one coat of primer through roller, complete all as specified and directed . |
| 9 | M&L For preparation of old surface after complete removal of existing treatment by mechanical complete all as specified and directed |
| 10 | M&L for 1 coat of primer using roller complete all as specified and directed. |
| 11 | M&L for two coats of OBD using roller for painting complete all as specified and directed |
| 12 | M&L preparation of Complete removal of existing treatment plastered old surface of of wall by applying 1mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting, complete all as specified and directed. |
| 13 | Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, complete all as specified and directed. |
| 14 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed. |
| 15 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed. |
| 16 | Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton unframed work, complete all as specified and directed. |
| 17 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed. |
| 18 | M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed. |
| 19 | Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises, complete all as specified and directed. |
| 20 | M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor, complete all as specified and directed. |
| 21 | M&L Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 Set and Jointed in neat cement slurry and pointed in colour cement to match, complete all as specified and as directed. |
| 22 | M&L Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles including 15 mm thick screed in cement mortar (1:4) as in floors etc complete all as specified. |
| 23 | S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade, complete all as specified and directed. |
| 24 | Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars et, complete all as specified and directed. |
| 25 | M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate, complete all as specified and directed. |
| 26 | All as per item No 25 but except blocks. |
| 27 | Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed. |
| 28 | M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc., complete all as specified and directed. |
| 29 | M&L for Chequred cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6), complete all as specified and directed. |
| 30 | M & L for 75 mm PCC 1:2:4 type B-1 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement, complete all as specified and directed. |
| 31 | M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specified and directed. |
| 32 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed. |
| 33 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed. |
| 34 | S&F anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc complete all as specified. |
| 35 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified |
| 36 | S&F Anodised aluminium window and ventilator shutters,including aluminium jali fixed in one side, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc including powder coated anodised aluminium frame, grill with one or more rebates. complete all as specified |
| 37 | M&L sheet glass 4.8mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 38 | S&F 2nd class soft wood 35 mm thick Glazed and skelton shutter, open and prepared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and as directed. |
| 39 | S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats, complete all as specified and directed. |
| 40 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification, complete all as specified and directed. |
| 41 | S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification, complete all as specified and directed. |
| 42 | M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 43 | S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed. |
| 44 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed. |
| 45 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed. |
| 46 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 47 | S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed. |
| 48 | S&F in repair aluminium (Die cast) body door closer hydraulically dessignation No 3 universal type suitable for door shutter of 851 to1000mm in width and weight 61 to 80 kg all as specified and directed |
| 49 | S&F floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and as directed. |
| 50 | S&F 100mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed. |
| 51 | S&F100mm long mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed. |
| 52 | S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed |
| 53 | S&F, Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed. |
| 54 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar, complete all as specified and directed. |
| 55 | M&L kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and ploishing and Including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6, complete all as specified and directed. |
| 56 | All as per item No.55 above but on vertical surface and Including backing coat of mortar 15mm thick in CM 1:4, complete all as specified and directed. |
| 57 | M&L for 20 mm thick granite stone (any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting, etc and screed bed with CM (1:4) 20mm thick laying floor tiles complete all as specified and as directed. |
| 58 | Dismantling water tank exc 500 & n exc 1000 litre and removing to store, complete as specified and directed. |
| 59 | S & F rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48 kg/Cum inner and out white two layers ISI marked ( cylindical vertical type/rectangular loft type closed top) hoisted hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store of 1000 ltrs capacity complete all as specified and as directed. |
| 60 | S&F 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule, complete all as specified and directed. |
| 61 | S&F 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR pipe and fixed in repair, complete all as specified and directed. |
| 62 | S & F in repairs fancy type 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfy handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 63 | Taking up or down 15 mm bore steel tubing and connections and set aside for re-use or removal to store, complete all as specified and directed. |
| 64 | Taking up or down 25/32 mm bore steel tubing and connections and set aside for re-use or removal to store, complete all as specified and directed. |
| 65 | S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge) |
| 66 | S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed. |
| 67 | S&F in repairs viterous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern and flush pipe) but including connection to 100mm dia trap 'P' or 'S', anti syphonage pipe etc complete all as specified and as directed. |
| 68 | Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixings lugs,excluding hinges,lock strike plate,etc,complete ,as specified ,supplied and fixed, complete all as specified and directed. |
| 69 | S&F Steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle ,and steel peg stay,complete with glazing bars,dovatiled or welded (Glass shall be measured Seperately)complete all as specified and directed. |
| 70 | S&F15 dia Angle stop valves, fancy type chromium plated with lonk shank and cup cast copper alloy , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes, complete all as specified and directed. |
| 71 | S&F PVC connectons 15 size with PTMT nuts (length 600mm), complete all as specified and directed. |
| 72 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with cromium plated brass screws and cup washers complete all as specified. |
| 73 | S & F in repair Vitreous China wash basin Fency type pedestal pattern , white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed. |
| 74 | S&F in repairs health faucet (ABS Body) mild steel shromium plated suitable for 15 mm dia with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, complete all as specified and directed. |
| 75 | Supply & Fixing sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed. |
| 76 | Supply & Fixing sheet glass basin shelf assembly consisting of 8mm thick glass shelf 600 x 150mm wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed. |
| 77 | S&F in repair 15mm bore CP wash basin mixer for mixing hot & Cold water copper alloy fancy type high pressure screwed for iron pipe and fixed in repair, complete all as specified and directed. |
| 78 | S&F in repair chromium plated fency pillar tap 15 mm dia complete all as specified and directed. |
| 79 | S & F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins, complete all as specified and directed. |
| 80 | S & F in sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, Waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 81 | S & F in repairs, 40mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams), complete all as specified and directed. |
| 82 | S & F in repairs, 32mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams), complete all as specified and directed. |
| 83 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed. |
| 84 | S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed. |
| 85 | M&L preparation of new untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 86 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and rubbish off the premises, complete all as specified and directed. |
| 87 | M&L for Reinforcement cement concrete (Nominal Mix) in type B1 1:2;4 ( 20mm graded aggregate) as in slabs supported of walls , beams and columns in floors, roofs, landings, balconices , canopies , deck slabs and in shelves etc complete all as specified and as directed |
| 88 | M &L for form work to soffits of suspended slabs flat type such as roof slabs , floor slabs , landings and similar work nto exceeding 200mm thick (Horizontal or slopping etc), complete all as specified and as directed |
| 89 | M&L mild steel TMT bars 10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bar, complete as specified and directed. |
| 90 | Excavation over areas not exc 1.5 m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc plan area exc 10 sqm hard/dense soil and getting out soil, complete all as specified and as directed. |
| 91 | Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specified and directed. |
| 92 | Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 93 | S&F 150mm dia bore (inner dia) double wall corrugated HDPE pipe (SN 8) in any length including all fittings and jointing with eastomeric rubber link and cuppler/other jointing materials laid in trenches or in floor including Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) for 150 mm bore pipes and dismantling of cast iron/ PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia, complete all as specified and directed. |
| 94 | S&F in repair 19mm dia mild steel, chromium plated curtain rods fancy type , with brackets, end bulbs, complete as specified and directed. |
| 95 | S&F in repairs Soap dish Cromum plated fancy type, complete all as specified and directed. |
| 96 | S&F in repairsTowel rail 600mm long Cromum plated (Minimum weight 190 gms), complete all as specified and directed. |
| 97 | S&F in repairsTowel Hnager with 6 Nos of pin and 600mm long Cromum plated etc complete fitted as per sepcified and directed. |
| 98 | S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level ,white ,with inlet, ball valve, float and handle including bracket & flush pipe of polyethylene of low or high density or high density or PVC,32mm dia,for low level cistern complete all as specified & directed. |
| 99 | Dismantling of cast iron ,PVC or reinforced concrete drain pipes, 75/110/150/200 mm dia, jointed in cement mortar and taking out of trenches, if required, complete as specified and directed. |
| 100 | S & F in repairs 110 mm bore PVC (SWR) single socleted in any length with rubber rings joints, fixed to walls and vent pipe as specified and directed. |
| 101 | S & F in repairs 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 102 | S & F in repairs 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 103 | M&L PVC (SWR) 75 mm dia floor trap with plain with grating including jointing with solvent cement complete all as specified and directed. |
| 104 | S&F grating doom 75mm dia of PTMT (min weight 25gms), complete as specified and directed. |
| 105 | Roughenng surface of old concrete floor by picking ,sweeping clean and washing down with water to remove dust, etc., complete as specified and directed. |
| 106 | Cutting out cracks to V section in existing roofs or terracing ,cleaning out ,wetting, grouting with cement and sand slurry 1:3, complete as specified and directed. |
| 107 | M&L for brushing neat cement slurry with 3.0 Kg of cement per Sq.meter., complete as specified and directed. |
| 108 | M&L 25 mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in floor finished even and fair with out using extra cement complete all as directed. |
| 109 | M&L for 20 mm thick bedding layer in CM 1: 4 complete all as specified and as directed. |
| 110 | M&L priming surfaces and applying normal treatment (for moderate condition ) for App based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surfaced application including preperation of new surface of membrane and applying two coats of Alumminium paint, complete as specified and directed. |
| 111 | Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface, complete as specified and directed. |
| 112 | Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:- |
| 113 | (a) One light/exhaust fan point controlled by one way switch |
| 114 | (c) One switch socket outlet 6 Amps, 230 volts point on Same board |
| 115 | (d) One switch socket outlet 6 Amps, 230 volts point on independent board |
| 116 | All as item No 112 above, but using cables 4 Sq mm size |
| 117 | Switch piano flush button single pole 6 Amps 230 volts one way, complete all as specified and directed. |
| 118 | Socket out let two-in-one 5 pin 6 Amps flush type, 230 volts, complete all as specified and directed. |
| 119 | Switch Socket combination 5 pin 6 Amps and 16Amps 230 volts, flush type universal, complete all as specified and directed. |
| 120 | Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed. |
| 121 | Supply and Fixing only in Replacement 4' x 1' LED light fitting 36 Watt, 220 V, AC surface mounted box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 122 | Replacement of MCB DB, SPN, 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating 200 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 123 | MCB, SPN, AC, 240 volts \\"C\\" series capacity of 63 Amps, 10kA and making connections, complete all as specified & directed. |
| 124 | MCB, SP, AC, 240 volts \\"C\\" series capacity of 6-32 Amps, 10kA and making connections, complete all as specified & directed. |
| 125 | M & L for submain wiring alongwith earth wire with the following sizes of FRLSH insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x10.0 sq. mm + 1x10.0 sq. mm earth wire complete all as specified and directed. |
| 126 | M & L for submain wiring alongwith earth wire with the following sizes of FRLSH insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x2.5 sq. mm + 1x2.5 sq. mm earth wire complete all as specified and directed. |
| 127 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 128 | S & F in repair 4 Way double door Triple Pole Neutral vertical load line Distribution Board suitable for Flush mounting and suface mounting with 250 A copper bus bar with neutral bars and earth bars with including MCCB 160 TPN as incomer and SP/TP MCBs as out going and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 129 | Supply and fixing in replacement of exhuast fan any type and size with sturdy engineering steel body 450mm sweep including taking down the existing unserviceable exhuast fan and making necessary arrangements for fixing connectioning with flexible three core cable from the ceiling rose and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 130 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 131 | M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 3 and all as specified and directed. |
| 132 | Material and labour for removing electric connection, inlet outlet pipes of FCU and supply and making necceary arrangement for passing inletoutlet pipes through panelling/ wall &keeping in safe custody and refix in its original postion and testing complete all as specified and/or as directed. |
| 133 | Deduct Schedule of Credit of Rs (-) 2984.40 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender