Tender For Special Repair To Building No Et 02 At Hattigor Under Ge Rangia
Tender Value
22.75 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baksa → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No Et 02 At Hattigor Under Ge Rangia
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Oct-2026 |
| 2 | 24-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats incl shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each complete all as specified and as directed. |
| 2 | All as per item No. 01 above but n exc 1.5 sqm complete all as specified and as directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 4 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 5 | Dismantling framed trusses (Wooden) span n exc 10m complete all as specified and as directed. |
| 6 | M&L for Dismantling timber scantlings 40 sq. cm and over in section, in any position and in unframed work, complete all as specified and as directed by Engineer-in-charge. |
| 7 | M&L for Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section and in unframed work, complete all as specified and as directed. |
| 8 | Dismantling wrought iron steel work or any other description not otherwise provided for, complete all as specified and as directed. |
| 9 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 10 | Dismantling of ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and as directed. |
| 11 | Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS wire tube supplied and fixed in opening as per specification and drawing complete all as specified and as directed. |
| 12 | Supply and fix factory made solid panelled PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC's channel having PVC sheet trip of 20mm wide stuck inside with solvent cement for styles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap for top rail and bottom rail panelling of plain colour PVC sheet to be fitted to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame including butt hinges and plaster the surface and painting etc at site as per specification and drawing complete all as specified and directed. |
| 13 | Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 14 | Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 15 | Supply & Fixing Factory made single extruded WPC (Wood Polymer Composite) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade), Calcium Carbonate and natural fibers (Wood Powder / Rice husk / Wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge) minimum Compressive strength of 50 N/sqmm modulus of elasticity 850N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) Stainless Steel 150mm long Tower Bolt conforming to IS 15833-2009 with and including S&F of 02 Nos. (per Leaf) Stainless Steel 150mm long handle conforming to IS 208-2020 and 300mm Stainless Steel sliding door bolt 12mm dia with and including a minimum of 6 carriage bolts and nuts four on bolt plate and two on stapple plate and fixed conforming to IS 15834-2008 including taking down of existing shutter complete all specified and directed. |
| 16 | Supply & Fixing Factory Made 30mm thick Solid PLAIN WPC (Wood polymer Composite) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension grade), calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cum, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/Borer Free. Water/Moisture Proof and Fire Retardant. For fixing Mosquito mesh and XTN aluminum mesh together on panel area of door except stiles and rails to be paneled with and including mesh with self-tapping round headed screws at required distance, screws and edges covered with feathered edge beading all-around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos door Stainless steel butt hinges 100mm long with Stainless steel screws for each, 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked) conforming to IS 15833-2009, 2 Nos stainless steel handles, 125 mm long, (ISI marked) conforming to IS 208-2020, 01 No. of helical door spring of 300 mm length including taking down of existing shutter complete all as specified and as directed by Engineer-in-charge. Note: 1. Material test certificate of all the items and authentication should be compulsory provided by the manufacturing company. 2. The rate of 03 Nos door Stainless steel butt hinges 100mm long with Stainless steel screws for each, 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainless steel handles, 125 mm long, (ISI marked), 01 no. of helical door spring of 300 mm length is inclusive in this item and nothing shall be paid extra on this item. 3. The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account. |
| 17 | S & F 5mm thick rubber neading strips of entrance doors having width exc 3cm and not exc 5cm to arrest entry of insects including taking down existing one complete all as specified and directed. |
| 18 | Providing and fixing of factory made uPVC approved colour Sliding window/ Ventilator of both glazing and wiremesh sliding shutters, Three track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 +-0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, Stainless steel wiremesh, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 19 | S&F in-repair of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed. |
| 20 | Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. |
| 21 | S&F in repair exposed GI powder coated snap grid frame of false ceiling 600 X 600 mm size of wall angle 25 X25 X 0.30mm size cross Tee 22 X 35 X 0.60mm with 1mm dia GI suspender fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm including supply and fixing of 4 mm thick pre painted E-board in false ceiling including fixing arrangement from roof complete all as specified and as directed. |
| 22 | M&L for Brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 incl demolition of brick work built in cement mortar including all quoins, arches pillars etc complete all as specified and as directed. |
| 23 | M&L brick work using sub class 'B' bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified and as directed. |
| 24 | M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces without using extra cement complete all as specified and directed. |
| 25 | Material and labour for rendering 15 mm thick (10+5) in two layers on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions, top surfaces finished fair and even without using extra cement complete all as specified and as directed.Note: WPC shall be apply in second layer and measured and paid separately. |
| 26 | Supply only liquid water proofing compound conforming to relevant IS complete all as specified and as directed. |
| 27 | Material and Labours for two coat of oil bound distemper over a coat of 1.5mm thick wall putty on newly plastered surfaces of walls including one coat of primer and necessary preparation of surfaces all as specified and directed. |
| 28 | M&L for preparing new plastered surface of wall and applying two coats of weather coat paint over 1.5mm thick wall putty on newly plastered surfaces of walls including a coat of primer and preparation of new surfaces complete all as specified and directed. |
| 29 | M&L for Hardcore with broken stones/ boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 30 | M&L for sand filling under floors or in foundations spreading and levelling in layers not exc. 25 cm thick including watering and consolidation complete all as per specified and as directed. |
| 31 | M&L for providing 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in floor/ path/ hardstanding/plinth protection, etc. or similar works, laid in altenate bays including use and waste of form work and finishing concrete surfaces even and fair, complete all as per specified and as directed. |
| 32 | M&L for providing 50 mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in floor/ path/ hardstanding/plinth protection, etc. or similar works, laid in altenate bays including use and waste of form work and finishing concrete surfaces even and smooth without using extra cement, complete all as per specified and as directed. |
| 33 | M&L for providing 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete (1:2:4), type B-0 (12.5mm gradded stone aggregates), complete all as per specified and as directed. |
| 34 | M&L 75mm thick P.C.C 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base/path etc complete all as specified and directed. |
| 35 | Materials and labour for Virified Ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 complete all as specified and directed. |
| 36 | Materials and labour for Virified Ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.72 sqm, as in skirting & dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 complete all as specified and directed. |
| 37 | S&F non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 complete all as specified and directed. |
| 38 | S&F for colour Glazed ceramic tiles 300X600 mm of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl backing layer of 10 mm thick CM(1:4) complete all as specified and directed. |
| 39 | M&L for providing 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in floor/ path/ hardstanding/plinth protection, etc. or similar works, laid in altenate bays including use and waste of form work and finishing concrete surfaces even and fair, complete all as per specified and as directed. |
| 40 | M& L for Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as per specified and as directed. |
| 41 | M&L for PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundations, fillings and mass concrete complete all as per specified and as directed. |
| 42 | M&L for Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as per specified and as directed. |
| 43 | M&L for Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed. |
| 44 | M&L for RCC 1:2:4 type B-1 (20 mm graded aggregate) (Nominal Mix) as in any structure/ Footing, Plinth Beam, Columns/Posts, Roof Beam, Lintel Beam, slabs supported on walls, beams and roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed. |
| 45 | Use and waste of formwork to any structure/ Footing, PB, RB, LB, Columns, Posts, Slabs supported on walls, beams and roofs, beams and roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed. |
| 46 | M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. |
| 47 | M&L mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and as directed. |
| 48 | S&F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and as directed by Engineer-in-charge. |
| 49 | S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 50 | S&F Pre-painted galvalume aluminium zink coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 51 | M&L for preparation new surfaces of steel and iron surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 52 | S&F in repairs Vitreous China Wash down couple water closet white or coloured (Integral Cistern mounted) pan and S/P trap of 680x370x750mm with and including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or anodised aluminium hinging device including connection to drain (or outgoing pipe) and anti syphonage pipe, etc., complete all as specified and as directed. |
| 53 | S&F in fancy type Vitreous China Urinal large size, Half stall type, white iincluding grating, 15mm dia 450mm long PVC connection pipe and 32mm dia 900mm long PVC Flexible waste pipe and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long CP brass screws, pointing around urinal back in putty; complete all as specified and as directed by Engineer-in-charge. |
| 54 | S&F Vitreous China counter top wash hand basin, white 550 x 400 mm including CP waste coupling, waste pipe, counter top with 18mm thick granite of any colour complete all as specified and as directed. |
| 55 | S&F in repair brass chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and as directed. |
| 56 | S&F connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 57 | S&F PVC Waste pipe 32/40mm dia complete all as specified and directed. |
| 58 | S&F in repair, Stainless steel Grating 100/125mm with/without hole for waste pipe complete all as specified and as directed. |
| 59 | S&F 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed. |
| 60 | S&F stop Valves/Angle valve CP, Fancy type 15mm bore, screwed down for iron pipe or brass ferrule complete all as specified and as directed. |
| 61 | S&F fancy type Pillar taps of 15 mm bore cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 62 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 63 | S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges with brass chromium plated complete all as specified and as directed. |
| 64 | S&F fancy Type, inbuilt LED light System, selected glass quality of size 760 mm x 600 mm Chamfered edge Looking mirror incl all necessary fittings/ fixtures fixed with chromium plated brass screws and cup washers complete all as specified and directed. |
| 65 | S&F in repair 32 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 66 | S&F unplasticised PVC pipes of pressure rating 10 kgf/cm² laid in 15mm dia and fixed in walls Floor including taking up or down steel water tubing & connections complete all as specified and directed. |
| 67 | All as per item No. 66, But 20mm dia complete all as specified and as directed. |
| 68 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and as directed. |
| 69 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and as directed. |
| 70 | S&F in repair PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 71 | S&F in repair PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 72 | S & F PVC (SWR) junction single (single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed. |
| 73 | S & F PVC (SWR) junction single (single T) equal or unequal with access door bore of pipe 75 mm complete all as specified and as directed. |
| 74 | S&F Rotational moulded polyethylene water storage tank of 1000 Ltrs capacity cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part-I including taking down of old unserviceable tank complete all as specified and as directed. |
| 75 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 76 | S&F in repair fancy type curtain/hanger rods of Stainless steel with fixing decorative bracket stops rollers etc complete all as specified and as directed. |
| 77 | M&L in repairs 300x300x25mm thick prepolished cement concrete chequered tiles jointed in neat cement slurry and pointed in white or coloured cement to match the floor and including 25mm thick screed bed in CM 1:4 and incl removal of old and necessary demolition and complete all as specified and as directed. |
| 78 | S & F in repair 20mm dia Gun metal, globe or Gate valve with iron wheel head screwed both ends for iron pipe, complete all as specified and as directed. |
| 79 | S & F 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and directed. |
| 80 | S&F roller blinds of 100% polyester blackout fabrics of weight of 310 g/m^2 (+-5%) having a fabric thickness of 0.45mm(+-0.05) and very high tearing strength with roller mechanism and aluminium channel. Color and pattern to be decided as per direction of Engineer in Charge, and making good the disturbed surfaces complete all as specified and as directed. |
| 81 | M&L granite (any type) slab 20 mm thick laid with 10mm thick CM 1:4 as in bedded in floor/wall and top of partition wall and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing all as specified and as directed. |
| 82 | M&L for constuction of masonary (Brick work with sub class 'B' bricks in full brick wall in CM 1:6) two stagging walls with double stable of standard size of height upto 3.0m above GL as per drawing no RNG/ TD/ 37 sheet 1/1 for PVC Tank as per specification of SSR Part-I(2009), complete all as specified and as directed. |
| 83 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing, complete all as specified and as directed. |
| 84 | Dismantling of Aluminium frame work with Glass and ACP sheet, complete all as specified and as directed. |
| 85 | S&F solid PVC wall panelling of approved sample consisting of 5mm thick wood grain or laminated or printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame incl S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame, This items including all the fittings/fixtures required for the panelling, no extra item shall be paid separately, complete all as per specified and as directed. |
| 86 | Taking down carefully aluminium/copper point wiring complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, regulators and separating serviceable fittings for reuse in the same work and removing unserviceable fittings from site complete all as specified and as directed. |
| 87 | Taking down unserviceable main switches and DB's incl wooden bds and removing from site incl making good disturbed surfaces of walls all complete all as specified and as directed. |
| 88 | Taking down and refixing old ceiling fans and to be kept safely in store and refixing the same after proper cleaning to the existing location along with suitable fan hook/hanging rod and testing complete complete all as specified and as directed. |
| 89 | M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLSH copper conductor cable drawn into and incl concealed (on wall only) PVC conduit (medium grade) with fittings of adequate dia and length with all accessories and fittings like bends, elbow, crosses, etc. with PVC round block and modular metal flush boxes of suitable size for mounting fittings like; switches, sockets, fan regulator, etc. incl 1.5 sqmm size PVC insulated multistranded FRLSH copper conductor cable as earth continuity conductor and connected to earth dolly for one light/ fan/ exhaust fan/ bell point controlled by one 1-way switch/ bell push complete all as per specified and as directed. |
| 90 | All as per Item No. 89 here-in-above, but for One 3 pin socket outlet, 5 Amps, independent board, complete all as specified and as directed. |
| 91 | All as per Item No. 89 here-in-above, but for One 3 pin socket outlet, 5 Amps on the same board, complete all as specified and as directed. |
| 92 | All as per Item No. 89 here-in-above, but for One 3/5 pin socket outlet, 15 Amps, independent board, complete all as specified and as directed. |
| 93 | S&F Modular Switch, One Module, 1-Way, 10 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 94 | S&F Modular Switch, One Module, 1-Way, 20 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 95 | S&F Modular Socket, 2/3 Pin, combined, 02 Module, 10 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 96 | S&F Modular Socket, 2/3 Pin, combined, 02 Module, 20 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 97 | S&F Modular stepped type electronic fan regulator, 02 module, 240V, AC, complete all as specified and as directed. |
| 98 | S&F Lamp holder Modular, PVC/Polycarbonate type complete all as specified and as directed. |
| 99 | S&F of ceiling rose surface backelite three terminals, PVC/ polycarbonate, insulated body, complete all as specified and as directed. |
| 100 | S&F Modular bell push 6A 1 module complete all as specified and as directed. |
| 101 | S&F Bell Buzzer Ding Dong AC, 230 volts single pole complete all as specified & as directed. |
| 102 | S&F modular cover plate (white) with frame, 3-module, complete all as specified and as directed. |
| 103 | S&F modular cover plate (white) with frame, 6-module, complete all as specified and as directed. |
| 104 | S&F modular cover plate (white) with frame, 8-module, complete all as specified and as directed. |
| 105 | S&F modular cover plate (white) with frame, 12-module, complete all as specified and as directed. |
| 106 | S&F surface and wall mounted LED tube light fitting 1x 20W, (4 Feet) with aluminium housing & integrated electronic driver, 6500K, 220-240 Volts, AC decorative box type with and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed. |
| 107 | S&F slim square panel LED luminaire with frame 600 mm x 600 mm, white powder coated with CRCA housing, 35/36 watt, 220-240 V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cables of suitable size, complete all as specified and as directed. |
| 108 | S&F 10 watt capacity, B-22 base LED Bulb/ lamp, complete all as specified and as directed. |
| 109 | S&F of Sheet Metal Enclosure MCB DB SPN, 12 way 240 volt, with suitable amp rated Bus-bar, Double door type MCB DB suitable for mounting incoming and outgoing MCBs of any type, complete all as specified and as directed. |
| 110 | S&F of Sheet Metal Enclosure MCB DB SPN, 8 way 240 volt, with suitable amp rated Bus-bar, Double door type MCB DB suitable for mounting incoming and outgoing MCBs of any type, complete all as specified and as directed. |
| 111 | S&F MCB Single Pole & Neutral (SPN), 'C' Curve, 32 Amps, 240 Volt for fixing on MCB DB's, 10 KA, 50 Hz, conforming to IS/IEC 60898, connecting up and testing, complete all as specified and as directed . |
| 112 | S&F MCB Single Pole (SP), 'C' Curve, 6-32 Amps, 240 Volt for fixing on MCB DB's, 10 KA, 50 Hz, conforming to IS/IEC 60898, connecting up and testing, complete all as specified and as directed. |
| 113 | S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium housing and heat resistant, IP 66 street light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and lens embedded PC cover having Top opening seperate driver compartment, with impact and corrosion resistant optics and necessary mounting arrangements/ fixing bracket, complete all as specified and as directed |
| 114 | S&F of exhaust fan, sturdy engineering plastic body, AC single Phase, 230V of size 300mm sweep with, blades, frame and louvers including connecting up with three core flexible copper cables of suitable size, complete all as specified and as directed. |
| 115 | S&F of exhaust fan, metal body, heavy duty, AC single Phase, 230V, 50 Hz, RPM 900, Copper winding of size 300mm sweep with, blades, frame and louvers including connecting up with three core flexible copper cables of suitable size, complete all as specified and as directed by Engineer-in-charge. |
| 116 | S&F of electric water heater (Geyser), vertical type storage, steel body and stainless steel inner tank with fero glass coating for corrosion resistance and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, including commissioning and testing complete all as specified and as directed by Engineer-in-charge. |
| 117 | M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLSH cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in 25mm dia PVC rigid non- metallic conduit with complete all as specified and as directed. |
| 118 | M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts & washers of galvanized iron or steel, proctected by GI pipe 15 mm dia by watering pipe 20 mm bore GI pipe (light grade) and chamber and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excavation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) including taking down old unserviceable one, complete all as specified & testing on completion.NOTE:- (i) item rates includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire.(ii) item rates includes the cost of 7.5 mtr GI earth wire. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender