Tender For Addition Alteration To Certain Omqs At 23 Wing Under Ge (Af) Jammu Under Ge (Af) Jammu
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
12 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Certain Omqs At 23 Wing Under Ge (Af) Jammu Under Ge (Af) Jammu
BOQ
| Sl. No. | Item Description |
| 1 | M&L for joint free colored non skid ceramic tiles 7to8 mm thick of any design, pattern as approved by GE/USER, area of each tile exc 0.11 and n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc including taking down / demolition of existing tile/PCC Floor/Terrazo flooring and including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same complete all as specified directed by Engr-in-Charge. |
| 2 | M&L for 300x600 x(7 to 8) mm thick joint free coloured of any design, pattern as approved by GE/USER glazed ceramic tiles of premium quality as in dado/ skirting and vertical surfaces set & jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying at site including taking down of existing tile/plaster/terrazo dado including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same complete all as spd and directed by Engr-in-charge. |
| 3 | Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified directed by Engr-in-Charge. Note:- Including make good the Jam of window/Door to receive new door/window by brick work,plaster and matching finishes including tiling as required also no extra payment should be made to the contractor against the same. |
| 4 | Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified directed by Engr-in-Charge. Note:- Including make good the Jam of window/Door to receive new door/window by brick work,plaster and matching finishes including tiling as required also no extra payment should be made to the contractor against the same. |
| 5 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws including all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 6 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws including aluminium hook & eye, hinges and handle complete all as per architectural drawings and the directions of Engineer-in-charge. |
| 7 | S&F for Anodised Aluminium Grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the window frame with C.P. brass/ stainless steel screw ( non- magnetic) @150 mm centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard section around the opening, all complete as per requirment and direction complete all as specified and as directed. |
| 8 | S&F for factory made 35mm thick 2nd class hard wood Plain, framed, panelled shutters, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treatedmedium density, wood particle board with commercial face veneers fitted to chowkhat including hinges, sliding bolt, tower bolt, handle complete all as specified and as directed by Engineer-in-Charge. |
| 9 | S&F for factory made 35mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I sec 8 clause 8.20 (a), fixed to chowkhat including hinges, sliding bolt, tower bolt , handle all as specified and as directed by Engineer-in-Charge. |
| 10 | S&F 5.5mm thick, ordinary quality and glazing with rouber beading, joining cleat etc in squar n exc 0.5 sq. m in each pane complete all as specified and as directed bu Engr-in-charge. |
| 11 | S&F 4.0mm thick, figured glass,pin headed type and glazing with oil putty in square n exc 0.5 sqm in each panel with rouber beading, joining cleat etccomplete all as specified and as directed bu Engr-in-charge. |
| 12 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing complate all as spd and directed by Engr-in-charge. |
| 13 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood partical board supplying & fixing in frame at site as per specification & drawing including hinges, tower bolt and handle complate all as spd and directed by Engr-in-charge. |
| 14 | S&F stainless steel wire cloth 0.63 mm nominal dia of wire and avg wide 1.40 mm aperture of tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified directed by Engr-in-Charge. |
| 15 | Taking down or cutting MS helical door spring 150mm to 200 mm long by welding or chiseling etc from metal door frames and S&F new hydraulic door closer in same position with screw or other accessories as per requirement on chowkhats/frame.complete all as spd and ditected by Engr-in- charge. |
| 16 | S&F stainless steel 25mm dia fancy type curtain rods fixed to wall with two no's of bracket,two no's of end ball and funnel including taking down of existing curtain rod and making good surface with putty complete all as specified directed by Engr-in-Charge. |
| 17 | S&F in repair for viterous china wash down water close (Pedestral pattern) EWC white and mild steels chromium plated or aluminium hinging device and connecting to 'P-trap' incl flush pipe 32mm dia connecting with flushing rim including PVC seat cover for EWC white colour complete with MS Hinged chromium plated including 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle ,including health faucet(ABS Body) mils steel CP sutabile for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position and including PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified directed by Engr-in-Charge. |
| 18 | S&F in repaired Vitreous china wash hand basin, white flat back, size 550 x 410X150 mm with brackets wall hung wash basin including cutting for and pinning in ends of brackets or erecting stand including pillar double lever wash basin mixer (Hot and cold) fancy type (swan neck) CP brass screwed down high pressure with or without lettered hot and cold with long screwed shanks and fly nut screwed for Iron pipe and fixed 15mm dia and including PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified directed by Engr-in-Charge. |
| 19 | S&F in repair fancy type Angle valve/stop cock cast copper alloy chromium Plated (CP) brass 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed.complete all as specified directed by Engr-in-Charge. |
| 20 | S&F in repair Brass CP brass wall mixer (3 in1 mixer) for Hot and cold for 15mm bore complete fixed to connection .complete all as specified directed by Engr-in-Charge. |
| 21 | S&F in repair 15mm dia Bib taps fancy type Chromium plated(CP) brass with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed.complete all as specified directed by Engr-in-Charge. |
| 22 | S&F glass shelf fixed with and including Chromium plated brass screws and cleats ( Minimum weight 300 gms).complete all as specified and directed by Engr in charge. |
| 23 | S&F PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified directed by Engr-in-Charge. |
| 24 | S&F in repairs brass Chromium plated brass shower rose with or without swivel joints 125mm size including shower arm length of 450mm fixing to steel pipe or union complete all as specified directed by Engr-in-Charge. |
| 25 | S&F stainless steel grating doom 125mm dia with waste hole.complete all as specified directed by Engr-in-Charge. |
| 26 | S&F soap dish approximate size 160x160x90mm including SS Chromium plated brass screws and plastic cleats.complete all as specified and directed by Engr in charge. |
| 27 | S&F in repair Towel Rail 60 cm (D type) long of CP fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 190 gms) complete all as specified directed by Engr-in-Charge. |
| 28 | S&F 5mm thick looking mirror of selected quality with and including stainless steel spacers and edging any size as directed by Engg-in-charge |
| 29 | S&F PVC wall mounter cabinate of size (55x35x14 inch) looking mirror of selected quality with and including stainless steel spacers and edging any size as directed by Engg-in-charge.Make :- Somany, Cera , Kazaria or any other equivalent. |
| 30 | Dismantling unservicable /cracked water tanks and removing from site capacity exe 500 ltr n.exe 1000 ltr complete all as spd and directed by Enr-in-charge.Add Note : Including demolition of existing RCC tank and making of brick pedstal for fixing new PVC water tank and removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same. |
| 31 | S&F white colour Rotational moulded polythene water storage tanks in square shape hoisted and fixed in position all as spd in SSR Part –I of capacity of tanks 1000 ltr capacity (Tripple layer) incl PVC float valve 20mm dia,gate valve for inlet and outlet pipe including GI nipple at inlet and outlet pipe.complete all as specified directed by Engr-in-Charge. |
| 32 | S&F 20mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors and including taking up or down steel tubing for 15mm dia pipe and connections complete all as spd and directed by Engg-in-Charge |
| 33 | M&L for surface preparation & Cleaning the surface and made free of dirt, foregin particles laitance followed by grinding all protrusions to make surface modulated and including cement platering 20mm thick in cment mortar 1:4 incl mixing of liquid water proofing compound as per manufecturer instruction on surfaces of floor etc finished even and smooth without using extra cement and making strips of size 30cm x 30cm .Thereafter, inspection for cracks on the surface caused by thermal expantion contraction. Cutting the grooves with suitable cutter machine in 'V' groove filled with Repair mortar/Mircroconcrete/General purpose grout as recommended propertionaly as per recommendation of manufacturer. Making of Gollas at all the corners with Polymer modified mortar (1:4) Cement :Sand with 3.5% Acylic of Cement weight , Supplying and applying High build waterproofing coating based on pure hydrophobic polyurethane cold applied of spray /brush applied membrane with and elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, hardness (shore A scale) 80, solar reflectance of 84% as per A ASTM E903-96, SRI of 106, capilary absorption of 0.01kg/m2 h0.5 as per EN 1062-3, adhesion must be of ˃ 2.0 N/mm2 as per EN 1542, artificial weathering must be passed as per EN 1062-11 temprature resistance must be in between -300C to +900C, no leakage upto 5 bars of water pressure as per DIN 1048 mm min 88% solid content. The system includes final top coat of high build waterproofing coating based on pure hydrophobic polyurethane white in color application in 2 coats with a total min consumption of 1.5 Kg per SQM in ratio 60% 40% in both coats respectively over a coat of epoxy primer 1:1:2 (Resin:hardner:water) with a min consumption of 0.2 Kg per SQM. Application should be given by company for the product on company letterhead,including Taking down existing water proofing treatment with tarfelt including cement Plaster / HP tiles/ from roof or wall surfaces such as parapets / RCC fins of any type in any thickness including demolition of RCC tank etc and prepare the surface for new treatment.complete all as specified and directed by Engr-in-charge.Note :-Including Removal of debris or excavated material out of the defence line at govt approved dumping area and no extra cost will paid to the contractor against the same. |
| 34 | S&F Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete,including providing skirting upto 150 mm height along the parapet walls in the same manner etc complete all as specified and directed |
| 35 | M&L for injecting at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same with white cement.complete all as specified directed by Engr-in-Charge. |
| 36 | M&L for making good the surface of chajja/facia/roof projection/ceiling etc by providing 10mm thick cement plaster 1:3 with anti-rust paint as per standared provision and necessary formwork,scaffolding required upto the 4th story including taking down of existing Plaster complete all as specified and directed and directed by engr-in-charge.Note :-No extra cost will be bourne by department. |
| 37 | M&L for preparation of New surface of walls and applying two coat of exterior emulsion/ Apex paint over a coat of primer incl filling gaps with wall care putty and applied using airless spray technology and capable of operating single spray gun with a suitable hose length the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer usage incl cleaning the floor ,joinary ,surfaces,usage complete all as specified directed by Engr-in-Charge. |
| 38 | M&L for Pre-febricated Structural steel work in tubular trusses including special shaped washer etc. complete using ERW,Square and rectangular section with induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in- Charge.Note:- Design and pattern (Ornamental & Special design) should be approved by GE before execution of work and no extra cost will be paid to the contractor by the department against the same. |
| 39 | S&F for Pre-painted galvalume aluminium zinc coated corrugated sheet (including pre-laminated guard film) 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws.complete all as specified directed by Engr-in-Charge. |
| 40 | M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces on walls finished fair and even without using extra cement mixed with including taking down of existing Plaster.and including finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified directed by Engr-in-Charge. |
| 41 | Supply only liquid water proofing compoundcomplete as per manufacturer instructions ISI marked complete all as specified directed by Engr-in-Charge. |
| 42 | M&L for 15mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement including taking down of existing Plaster and including preparation of newly plastered surfaces of walls,Applying two coats of distemper with oil emulsion over a coat of primer including necessary formwork scaffolding required upto the 4th story complete all as specified as directed by Engineer-in-Charge. |
| 43 | M&L Preparation of new or previously untreated steel or steel based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 44 | M&L Prepration of old decorated surfaces of ceiling including scraping of old flakes with the help of mechenical /elcterical sander ,washing down with help of water and apply one coat of white wash on surface of ceiling,necessary formwork scaffolding required upto the 6th story complete all as specified directed by Engr-in-Charge. |
| 45 | M&L for complete removal of existing treatment on walls including preparation of old decorated surface of wall ,applying two coats of oil bound distemper paint on walls over a coat of primer with mechenical sprayer followed by roller and filling gaps with putty to make surface upto desired finish as app by Eng-in-charge.complete all as specified directed by Engr-in-Charge. Note: Each layer of OBD shall have a gap of 08 Hrs till previous layer has dried up and work has to be executed through company employee ,before all Make and executing agencey shall have the app of GE. |
| 46 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 47 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender