Tender For Certain B/R & Electrical And Mechanical Repair Works Of Otm Accn Of Rimc Under Age B/R-Ii Of Ge Dehradun.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
19 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain B/R & Electrical And Mechanical Repair Works Of Otm Accn Of Rimc Under Age B/R-Ii Of Ge Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of Cement concrete in ground floors and pavings of any thickness (below or above ground level) complete all as specified and directed. |
| 3 | Material and Labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring, complete all as specified and directed. |
| 4 | Dismantling of stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc, complete all as specified and directed. |
| 5 | Material and Labour for 12-15 mm thick Granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platformes and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite including moulding, complete all as specified and directed. |
| 6 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. |
| 7 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth, complete all as specified and as directed by Engr-in-Charge. |
| 8 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth, complete all as specified and as directed by Engr-in-Charge. |
| 9 | Material and Labour for rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work even and smooth as in ceiling, complete all as specified and ditected. |
| 10 | Material and Labour for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 , using old size bricks, including demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 11 | Material and Labour for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (using old size bricks) including demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 12 | Material and Labour for vitrified ceramic coloured tiles 8-9 mm thick dark shed (square/rectangular) polished area of each tiles not exceeding 0.72 Square meter, in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 13 | All as per item No 10 here in above but as in skirting and over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 14 | Material and Labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 15 | Material and Labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 600x600 mm x 8-9 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 16 | Material and Labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 17 | All as per item No 13 here in above but as in skirting and over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 18 | Material and labour heavy duty endura ceramic coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 19 | Material and Labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confiRunning metering to IS 15658- 2006 M-35 Grade with grey cement and no pigment ,complete all as specified and as directed by the Engr-in-Charge. |
| 20 | Material and Labour for sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 21 | Material and Labour for 40 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in leveling course to floors, complete all as specified and directed. |
| 22 | Taking down chowkats or frames with shutter not exc. 1.5 Sq mtr each with shutters (without taking off shutters) from the frames, complete all as specified and as directed. |
| 23 | Taking down chowkats or frames with shutter exc. 1.5 Sq mtr but n exc. 4 Square meter each with shutters (without taking off shutters) from the frames, complete all as specified and as directed. |
| 24 | Taking down shutter of any description exc 1.0 sq.m but n.exc 2.00 Square meter each, complete all as specified and directed. |
| 25 | Dismantling block board/ boarding/False Ceiling/ Wall Panelling of any description and in any position complete including iron mongries ,complete all as specified. |
| 26 | Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 125x65 mm made from wood plastic composite (single extruded process) material with density 780 Killogram/Cubic meter from ISO certified company door should be water proof, teRunning meterite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed by Engr-in-Charge. |
| 27 | Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 105x65 mm made from wood plastic composite (single extruded process) material with density 780 Killogram/Cubic meter from ISO certified company door should be water proof, termte proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed by Engr-in-Charge. |
| 28 | Supply and fix 30 mm thick factory made solid WPC (Wood plastic composite) gauged skeleton door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can density shall be as per manufacturer specified and complete all as specified and directed by Engr-in-Charge. |
| 29 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type designer flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Killogram/Cubic meter and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 30 | Supply and fix 30mm thick wooden flush shutters, solid core construction, designer with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings, complete all as specified and directed. |
| 31 | Supply and fix for 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge, complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed. |
| 32 | Supply and fix for stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails, complete all as specified and directed. |
| 33 | Supply and fix in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified and directed. |
| 34 | Supply and fixing for Anodised aluminum powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having two Disc or D type handle, two aluminum tower bolt 200 mm size, one brass mortice lock of 6 lever with key and one hydraulic door closure, shutter to be partly glaze with 4mm thick tinted coloured glass in upper panel and partly pannelled with 4mm thick ACP sheet of approved colour in lower panel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed. Chowkhat Frame:- 100 x 44 x 1 mm Shutter Vertical style:- 100 x 44 x 1 mm Shutter Middle Rail:- 100 x 44 x 1 mm Shutter Top Rail and bottom Rail:- 150 x 44 x 1 mm |
| 35 | Supply & fix for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed. Note: Iron grill with frame to be fixed with window (measured and paid separately) |
| 36 | Supply & fix for powder coated Aluminium standard hollow section as mentioned below with frame of Size 100x44x1 mm (Bombay sliding) with two glazed shutter and one nos stainless steel wire gauged shutter sliding type, 3 track numbers for sliding windows, and glazed with glass 4mm thick & including glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking system and provision of space for AC etc complete all as specified and directed by Engr-in-charge. Size of Track- Top, Bottom & both vertical sides (Verticles sides):- 100 x 44 x 1 mmSize of Shutter Frame:- 25 x 12 x 1 mmNote: Iron grill with frame to be fixed with window (measured and paid separately) |
| 37 | Supply and fix for stainless steel Butt Hinges medium weight,100 mm fixed to steel/wooden shutters complete all as specified and directed. |
| 38 | Supply and fix for stainless steel barrel tower bolts 200 mm size, with bright bolt, complete all as specified and directed. |
| 39 | Supply and fix for stainless steel handles 150 mm size complete fixed complete all as specified and directed. |
| 40 | Supply and fix for stainless steel sliding door bolts 'bolt type' 300 mm size with and including 6 nuts and bolts, complete all as specified and directed. |
| 41 | Supply and Fix 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate, complete all as specified and directed. |
| 42 | Supply & fix 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive ,complete all as specified and directed by the Engineer-in-Charge. |
| 43 | Supply & fix 18 mm thick PVC board both side pain white as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive ,complete all as specified and directed by the Engineer-in-Charge. |
| 44 | Supply & fix 6 mm thick PVC board both side plain white colour as in cupboard selves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications & directed by Engr-in-Charge. |
| 45 | Supply and fix for magnetic catcher and striking plate including letting in and fixed, complete all as specified and directed. |
| 46 | Supply and fix for Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed. |
| 47 | Supply and fix in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum), complete all as specified and directed. |
| 48 | Supply and fix for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square/rectangular shape in each pane including hacking out of old glass, complete all as specified and directed. |
| 49 | Supply and fix for 4 mm thick frosted sheet glass ordinary quality and glazing with oil putty or wooden beads in square/rectangular shape in each pane including hacking out of old glass,complete all as specified and directed. |
| 50 | Supply and fix in repair stainless steel peg sets (minimum 5 hooks each) secrewed to wall ,complete all as specified and directed. |
| 51 | Supply and fix for 15 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor including taking down of old unserviceable pipes, complete all as specified and directed by Engr-in-Charge. |
| 52 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed by Engr-in-Charge. |
| 53 | Supply and fix for 20 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor including taking down of old unserviceable pipes, complete all as specified and directed by Engr-in-Charge. |
| 54 | Supply and fix in repair vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, connecting to stack pipe and to flushing pipe and complete including making good to floor, complete all as specified and directed. |
| 55 | Supply and fix in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor, complete all as specified and directed. |
| 56 | S&F in repair vitreous china rimless single piece WC wall mounted UF with soft close slim seat cover, hinges, fixing accessories and dual flushing cistern complete all as specified and directed. |
| 57 | Supply and fix in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc, complete all as specified and directed. |
| 58 | Supply & fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 59 | Supply and fix rotational moulded polyethylene water storage tanks of capacity 500 litres tripple layer, not less than 18 Killogram (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 60 | Supply and fix for rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks of weight not less than 33 Killogram (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia including dismantling of old tank complete all as specified and directed. |
| 61 | Supply and fix for rotational moulded polyethylene 2000 Ltrs Capacity water storage tanks of weight not less than 33 Killogram (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia including dismantling of old tank complete all as specified and directed. |
| 62 | Supply & fix in repair 20 mm size PTMT ball valves, high pressure with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of any bore & in any position, complete all as specified and directed. |
| 63 | Supply and fix in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends ,complete all as specified and directed. |
| 64 | Supply and Fix in repairs health faucet suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position ,complete all as specified and directed. |
| 65 | Supply and fix in repair Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 66 | Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long, complete all as specified and directed. |
| 67 | Supply and fix in repair 75 mm bore PVC (SWR) Type B pipe pressure 4Killogramf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches or in floors, complete all as specified and directed. |
| 68 | Supply and fix in repair 110 mm bore PVC (SWR) Type B pipe pressure 4Killogramf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches, complete all as specified and directed. |
| 69 | Supply and fix in repair 75 mm bore PVC (SWR) Type B bends any radius, complete all as specified and directed. |
| 70 | Supply and fix in repair 110 mm bore PVC (SWR) Type B bends any radius, complete all as specified and directed. |
| 71 | Supply and fix in repair 75 mm bore PVC (SWR) Type B junction single, (Single T) equal or unequal ,complete all as specified and directed. |
| 72 | Supply and fix in repair 110 mm bore PVC (SWR) Type B junction single, (Single T) equal or unequal complete all as specified and directed. |
| 73 | Supply and fix in repair PVC nahani trap 75 mm size, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4), complete all as specified and directed. |
| 74 | Supply and fix in repair heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ltrs tank ,complete all as specified and directed by the Engr-in-Charge. |
| 75 | Supply and fix in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed, complete all as specified and directed. |
| 76 | Supply and fix in repair CP brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot and cold water with telephonic shower provn with connecting legs &flanges, complete all as specified and directed. |
| 77 | Supply and fix in repair 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe, complete all as specified and directed. |
| 78 | Supply and fix in repair brass chromium plated shower rose 125 mm size, complete all as specified and directed by Engr-in-charge. |
| 79 | Supply and fix in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed ,complete all as specified and directed. |
| 80 | Supply and fix in repair 15mm bore Bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 81 | Supply and fix in repair of size 600mm X 450 mm fancy looking mirror mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified and directed. |
| 82 | Supply and fix in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges ,complete all as specified and directed. |
| 83 | Supply and fix for 32 mm Waste fittings/coupling, brass, chromium plated for sinks, washbasins, etc. with long screwed shanks and fly-nuts, complete all as specified and directed. |
| 84 | Supply and fix for 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union,complete all as specified and directed. |
| 85 | Supply and fix in repair soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engr-in-charge. |
| 86 | Supply and fix in repair glass corner shelf of suitable size made of 5mm thick toughned, complete all as specified and as directed. |
| 87 | Supply & fix in repair glass shelf assembly consisting of 5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm, complete all as specified and directed. |
| 88 | Material and Labour for Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr complete all as specified and directed. |
| 89 | All as per serial item No 89 here-in-before but capacity of water tanks exc 500 ltr and not exc 1000 ltr ,complete all as specified and directed. |
| 90 | Material and Labour for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1-1.5 mm thick wall care putty finish wall surface even & smooth, complete all as specified and directed. |
| 91 | Material and Labour for preparation of newly plastered surface of ceilings and applying three coats of white wash on ceilings, off sets, pillar etc,complete all as directed and specified. |
| 92 | Material and Labour for preparation of old wall surface and applying one coats of distemper oil emulsion over applying of 1-1.5 mm thick wall care putty finish wall surface even & smooth,complete all as specified and directed. |
| 93 | Material and Labour for preparation of old ceiling surface and applying two coats of white wash on ceiling, off sets, pillar etc,complete all as directed and specified. |
| 94 | M&L for preparation of newly plastered surface of external wall by application of 1mm wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. |
| 95 | All as per item No 94 here in above but on old surface after complete removal of existing treatment,complete all as directed and specified. |
| 96 | Material and Labour preparation of old painted surfaces of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint, complete all as specified and directed. |
| 97 | Material and Labour for two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces, complete all as specified and directed. |
| 98 | Material and Labour for one coat of synthetic enamel paint on old painted steel surfaces/concrete surface of any description including preparation of steel surfaces, complete all as specified and directed. |
| 99 | Material and Labour for preparation of old surface of wall and applying two coats of cement based paint of finish wall surface even and smooth, complete all as specified and directed. |
| 100 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc, complete all as specified and directed. |
| 101 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for ,complete all as specified and directed. |
| 102 | Supply and fix for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, AZ-150 fixed with self tapping screws ,complete all as specified and as directed. |
| 103 | Supply and fix for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an ecofriedly colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, AZ-150 fixed with self tapping screws, complete all as specified & directed. |
| 104 | Supply and fix for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tubular or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A ,complete all as specified and directed. |
| 105 | Supply and fix for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necessary welding, drilling hole, complete all as specified and directed. |
| 106 | Supply and fixing for solid PVC wall lining consisting of 5 mm thick (Hollow) wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing including dismantling of old boarding complete all as specified and directed. |
| 107 | Material and Labour for providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main \\"T\\" at 600 mm c/c to foRunning meter a grid of 1200x600mm and secondary cross \\"T\\" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to foRunning meter grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, complete all as specified and directed. |
| 108 | S&F in repair 1.5mm thick fibre glass reinforced plain translant/coloured sheet any colour as approved and fixed to framing complete all as specified and directed. |
| 109 | M&L for PCC 1:3:6 type C-1( using 20mm graded aggregate ) as in coping, Kneelers, apex stones bed plates, Kerbs stone, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 110 | Material and labour for point wiring with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC surface/ concealed conduit as per existing or as directed at site in 20mm dia or higher size complete including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall of thickness 1.2 mm for mounting of modular switches, sockets, fan regulators etc including logic modular white frame with cover plates of suitable size/module as required at site and 1.5 sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code. |
| 111 | (a) One light point, controlled by one way switch. |
| 112 | (b) One fan point, controlled by one way switch through regulator. |
| 113 | (c) One bell point, controlled by bell push switch. |
| 114 | (d) One three pin 5 Amp socket on same board with other switches |
| 115 | (e) One three pin 5 Amp socket on independent board |
| 116 | (f) two way light point controlled by two two way switch |
| 117 | (g) All as per Item No 1 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete. |
| 118 | Material and labour for point wiring with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through existing concealed conduit of any size or type complete including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall of thickness 1.2 mm for mounting of modular switches, sockets, fan regulators etc including logic modular white frame with cover plates of suitable size/module as required at site and 1.5 sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code. |
| 119 | (a) One light point, controlled by one way switch. |
| 120 | (b) One fan point, controlled by one way switch through regulator. |
| 121 | (c) One bell point, controlled by bell push switch. |
| 122 | (d) One three pin 5 Amp socket on same board with other switches |
| 123 | (e) One three pin 5 Amp socket on independent board |
| 124 | (f) two way light point controlled by two two way switch |
| 125 | (g) All as per Item No 2 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete. |
| 126 | Material and labour for sub main wiring with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty FRLSH copper conductor multistranded drawing in and including 20 mm dia or higher medium duty PVC surface/ concealed conduit/ flexible conduit as existing or as directed at site whereever required and conduit accessories and fittings including one single core green colour PVC insulated unsheathed FRLSH cable copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete including cutting chases for conduits etc after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. Note : The wiring to be done as per IE rule and as per colour code. |
| 127 | (a) 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire. |
| 128 | (b) 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire. |
| 129 | Material and labour for sub main wiring with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded drawn in existing concealed conduit any type or size including one single core green colour PVC insulated unsheathed cable FRLSH copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. Note : The wiring to be done as per IE rule and as per colour code. |
| 130 | (a) 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire. |
| 131 | (b) 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire. |
| 132 | Supply and fix modular switch single pole one way, one module, 230 Volts 6 Amp complete all as directed. |
| 133 | Supply and fix modular socket 6 Amps, 2/3 pin combined, two module, 230 Volts complete all as directed. |
| 134 | Supply and fix modular switch single pole one way, one module, 230 Volts 16 Amp complete all as directed. |
| 135 | Supply and fix modular socket 6/16 Amps, 2/3 pin combined, two module, 230 Volts complete all as directed. |
| 136 | Supply and fix modular switch single pole two way, one module, 230 Volts 6 Amp complete all as directed. |
| 137 | Supply and fix bell push modular flush type, single pole one way 6 Amps, one module, 230 volts complete all as directed. |
| 138 | Supply and fix calling bell ding dong type AC 230 Volt single pole complete all as specified and directed. |
| 139 | Supply and fix lamp holder polycarbonate insulated body, with back plate suitable for batten fitting complete all as specified and directed. |
| 140 | Supply and fix step type modular fan regulator two module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as directed. |
| 141 | Supply and fix modular ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed. |
| 142 | Supply and fix energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed. |
| 143 | Supply and fix energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed. |
| 144 | Supply and fix LED Bulk head light fitting 10 Watt capacity die cast alluminum including surface mounted, with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed by Engr-in-charge. |
| 145 | Supply and fixing LED building security light fitting 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, nuts & washers of min 1.2 mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete. |
| 146 | Supply and fix distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including taking down existing unserviceable and depositing to MES store yard complete all as directed.Note:- DB and MCCB/MCB shall be of same make. |
| 147 | Supply and fix distribution board SPN 12 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including taking down existing unserviceable and depositing to MES store yard complete all as directed.Note:- DB and MCCB/MCB shall be of same make. |
| 148 | Supply and fix distribution board Triple pole and neutral double door 415 Volt 4 way DBs IP-43 suitable for 160 Amps rated bus bar incl taking down existing unserviceable and depositing to MES store yard complete all as directed.Note:- DB and MCCB/MCB shall be of same make. |
| 149 | Supply and fix distribution board vertical Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 160 Ams rated bus bar & including one MCCB 100 Amp 4 pole as incoming incl taking down existing unserviceable and depositing to MES store yard complete all as directed.Note:- DB and MCCB/MCB shall be of same make. |
| 150 | Supply and fix MCB single pole and neutral 240 volt 10 KA 40 Amp 'C' series conforming to ISI marked complete all as directed. |
| 151 | Supply and fix MCB single pole and neutral 240 volt 10 KA 32 Amp 'C' series conforming to ISI marked complete all as directed. |
| 152 | Supply and fix MCB single pole 240 volt 10 KA 6- 32 Amp 'C' series conforming to ISI marked complete all as directed. |
| 153 | Supply and fix MCB TPN 415 volt 10 KA 63 Amp 'C' series conforming to ISI marked complete all as directed. |
| 154 | Material and labour in replacement for earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick burried directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised from 4 mm dia earth lead by means of bolts, nuts, check nuts and wathers of GI or steel all as shown in electrical plate No. 5 of SSR Part-I 1991 connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber ( 1 : 3 : 6) type C1, RCC pit cover , charcol, salt including provision of earth lead protected by 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete. Note: (i) If the desired earth resistance less than 05 Ohm is not found within permissible limit shall be redone by contractor at no extra cost.(ii) Cost of GI wire 4 mm dia earth lead and 20mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering upto 7.5 mtr is included in the rate quoted for this item. |
| 155 | Material and labour for laying, jointing and testing in replacement underground XLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs including taking out existing unserviceable of any size/ type complete for the following cables of cross sectional area all as directed: Notes:(a) Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately.(b) Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses.(c) Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor. |
| 156 | (a) 10.0 Sqmm, 4 core. |
| 157 | (b) 16.0 Sqmm, 4 core. |
| 158 | Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cable, foundation etc and getting out complete all as directed. |
| 159 | Material and labour for sand cushioning & covering of UG cable using crushed metal sand in trenches for cable protection complete all as directed. |
| 160 | Material & labour for sub class B bricks well burnt of size 23 x 11.5 x 7.5 cm for protection of UG cable laid dry flat over the cable width wise across the length of the cable and abutting each other with gap less than 10mm between the adjacent bricks in trenches complete all as directed. |
| 161 | Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil complete all as directed. |
| 162 | Removing of excavated soil to a distance n exc 50 mtr and deposited where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 163 | Supply & Laying GI tubing light grade with all fittings and accessories for protection of cables on ploe/ wall or under road crossings including clamps, nuts, bolts etc of size 50 mm complete all as directed. |
| 164 | Supply and fixing in repair LED tube light fitting 1x20 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed. |
| 165 | Supply and fixing in repair wall mounted LED tube light fitting 1x10 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed. |
| 166 | Supply and fixing in repair LED building security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete voltage surge protection of 4kv & with 3 core 1.5 sqmm PVC insulated cable complete all as specified including taking out old u/s fitting complete. |
| 167 | Supply and fixing in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 168 | Note : Tenderers may note that amount of credit Rs 69467.00 will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender