Tender For Various Repair And Maintenance Works With Day To Day Maintenance Works Of Existing Janana Hospital Wards, Udaipur
Tender Value
30.45 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
0 days left
EMD
60900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Various Repair And Maintenance Works With Day To Day Maintenance Works Of Existing Janana Hospital Wards, Udaipur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm |
| 2 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. |
| 4 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below. |
| 5 | Removing aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 6 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 7 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge |
| 8 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 9 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finish :20 mm thick. |
| 10 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 11 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 12 | Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm |
| 13 | S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. |
| 14 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :30 mm thick .Commercial Veneer both side |
| 15 | Repair of door, window shutters including cost of material and labour for change of damaged : |
| 16 | Style / rail of teak wood 30mm thick/ Aluminium Section 6\\" wide |
| 17 | Panel by Shuttering Ply - 9mm thick (Commercial) |
| 18 | Aldrop of mild Steel 12\\" long x12mm dia |
| 19 | Mild Steel Tower Bolt 6\\" long |
| 20 | Steel hinges - For Wooden Chowkhat 4\\" size |
| 21 | Steel Handle 6\\" size |
| 22 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. |
| 23 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Old work (One or more coats ) |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : new work |
| 25 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 26 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles. Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. |
| 27 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design |
| 28 | Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :- |
| 29 | Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. |
| 30 | Applying Epoxy primer on the exposed steel bars. |
| 31 | Applying Epoxy hardener and resin mix (as per manufectured's specification) on concrete and steel bars with brush. |
| 32 | Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. |
| 33 | Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. |
| 34 | Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. |
| 35 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: |
| 36 | Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvalume steel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm sheets be casted with regular modified polyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate made to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and for a minimum up to 12mts with all scaffolding. |
| 37 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 38 | Providing and fixing double scaffolding system on the exterior side, upto five story made with 4\\" wooden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. The scaffolding system shall be stiffened with bracing, runner, connection of building if necessary with all essential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding.Note : This item to be used for maintence work judicially |
| 39 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835. With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835. |
| 40 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) |
| 41 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Prelaminated particle board with decorative lamination on both sides. |
| 42 | Carriage of Following Material including loading unloading and stacking if require complete in all repsect.Earth Sand,Lime Morrum Manure or Sludge building rubbish stone metal(Grit & Ballast) Stone for masonary work & Soling and excavated rock etc. For lead 10 Kms |
| 43 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. |
| 44 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 45 | P & F water closet Seat Covers with brass hinges complete :Solid PVC (IS 2548 marked) grade-I White for EWC. |
| 46 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231 . |
| 47 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. |
| 48 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 550 mm x 400 mm |
| 49 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : Fire clay glazed kitchen sink (I.S 771-1985 Marked) size 600 x 450 x 250mm. |
| 50 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make :CP brass push type Half-turn exposed 25mm nominal bore. |
| 51 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 52 | C.P. Brass bib cock,15mm nominal bore. |
| 53 | Synthetic Material(PTMT) bib cock of approved quality/ make, nominal bore,15mm, 86 mm long. |
| 54 | (-do-) Elbow-action, 15mm nominal bore. |
| 55 | P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make: |
| 56 | C.P. Pillar cock, 15 mm dia nominal bore |
| 57 | Synthetic Material (PTMT) Pillar cock of approved quality / make 15mm nominal bore. |
| 58 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:C.P. Brass 15mm nominal bore. |
| 59 | P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 600mm |
| 60 | P& F waste Pipe with all fitting P.V.C with C.P nut 32 mm |
| 61 | P & F Grating of approved quality/make:C.P. brass with frame (Heavy) & superior quality size 125mm dia. |
| 62 | P & F C.P. brass Doom Waste Coupling 32 mm dia. |
| 63 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.Not less than 800 gm, 32mm. |
| 64 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 65 | Gun-metal 25mm nominal bore. |
| 66 | Gun-metal 40 mm nominal bore. |
| 67 | Gun-metal 50 mm nominal bore. |
| 68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) |
| 69 | 20mm nominal size |
| 70 | 25 mm nominal size |
| 71 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. |
| 72 | 25mm dia nominal bore \\"B\\" Class |
| 73 | 40mm dia nominal bore\\"B\\" Class |
| 74 | 50mm dia nominal bore\\"B\\" Class |
| 75 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work). |
| 76 | 25 mm nominal size |
| 77 | 50 mm nominal size |
| 78 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make |
| 79 | 75mm dia |
| 80 | 110mm dia |
| 81 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. |
| 82 | Hoisting Charges for each floor : For items 2.26.5 to 2.26.8 |
| 83 | Providing and fixing superior quality PVC Tank Cover complete as per approved by Engineer In Charge |
| 84 | Above 500 Lt. capacity |
| 85 | Supply of Safeda ballies 125 mm diameter |
| 86 | Supply of C.I. bracket for wash basin and sinks |
| 87 | Supply of Brass bib-cock 15 mm dia |
| 88 | Supply of Brass stop-cock 15 mm dia |
| 89 | Supply of Indian type white glazed vitreous china Ist quality W.C. orissa pan Size 580x440 mm. |
| 90 | Supply of European type white glazed vitreous china Ist quality W.C. pan |
| 91 | Supply of Low level Flushing Cistern of 10 litres capacity : PVC with PVC bend as per IS : 7231 |
| 92 | Supply of brackets |
| 93 | Supply of Brass full way valve with C.I. wheel (screwed end) 25 mm dia |
| 94 | Supply of Brass full way valve with C.I. wheel (screwed end) 50 mm dia |
| 95 | Supply of C.P. brass waste coupling 40 mm |
| 96 | Supply of P.V.C Waste pipe with C.P. nut 40 mm dia |
| 97 | Supply of Vitreous china flat back wash basin 550x400 mm |
| 98 | Supply of Jet spray for water closet with C.P. Copper Tube flange |
| 99 | Supply of C.P. Pillar Cock 15 mm nominal size |
| 100 | Supply of Grating Stainless Steel Sheet size 125mm dia. |
| 101 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. |
| 102 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. |
| 103 | Supply of U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 75 mm dia. |
| 104 | Supply of U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 110 mm dia. |
| 105 | Supply of Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete |
| 106 | Supply of 9 mm thick commercial ply |
| 107 | Supply of 30 mm thick prelaminated flush door shutter |
| 108 | Supply of Aluminium T or L sections |
| 109 | Supply of 15 mm PTMT bib cock |
| 110 | Supply of PTMT pillar cock |
| 111 | Supply of PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball |
| 112 | Supply of New spindle for Bib cock/pillar cock |
| 113 | Supply of PVC Tank Cover Above 500 Lt. capacity |
| 114 | Supply of SS wire gauge |
| 115 | Supply of 5mm Thick Float Glass (ISI make) |
| 116 | Supply of C.P. Brass angle valve 15 mm |
| 117 | Supply of 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts |
| 118 | Supply of Carpenter 2nd class |
| 119 | Supply of Fitter (grade 1) |
| 120 | Supply of Assistant Fitter or 2nd class Fitter |
| 121 | Supply of Mistry |
| 122 | Add GST (18%) on Total Construction Cost Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender