Tender For Repair/ Renovation Of Quarter No. 05 Block-G At Police Housing Colony Qammerwari Srinagar Under Account Head Minor Civil And Electrical Works In Demand 51 Police.
Tender Value
2 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Renovation Of Quarter No. 05 Block-G At Police Housing Colony Qammerwari Srinagar Under Account Head Minor Civil And Electrical Works In Demand 51 Police.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10 mm to 25 mm (5mm thick) |
| 4 | Providing and fixing of CP fitting of Haquar/Cera Make 15mm nominal bore. |
| 5 | Angle valve |
| 6 | Bib Cock |
| 7 | Sink Mixer |
| 8 | Basin Mixer |
| 9 | Wall Mixer |
| 10 | CP grating 100mm size |
| 11 | Towel Rod |
| 12 | Soap Case |
| 13 | PVC Connection 1'-6\\" long |
| 14 | Providing and fixing of wardrobe 24\\" deep of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality including back covering of 6mm thick water proof ply and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job) |
| 15 | 15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement: 6 fine sand) |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 17 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 18 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick |
| 19 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 20 | Provding and fixing of PVC Soil waste and vent pipes of approved manufacture and brand (type-B) incluidng jointing with adhesive complete. |
| 21 | 100mm dia |
| 22 | 75mm dia |
| 23 | Providing and fixing of fitting to PVC Soil waste pipes of approved amnufactuire and brand (type-B) |
| 24 | 100mm dia plain bend |
| 25 | 100mm dia floor trap |
| 26 | 75mm dia plain bend |
| 27 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown |
| 28 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 29 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 30 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 31 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 32 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) KD wood |
| 33 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class kail wood |
| 34 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws First class kail wood |
| 35 | Repairing of existing Joinery shutters by skilled labourer incluidng tools and plants required as directed by EIC |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 37 | Providing and fixing of laminates to existing shutters of wardrobes/ kitchen Almirah of required shade including all locking arrangements and handles of approved brand including removing of old Mica. |
| 38 | Providing and fixing of PVC panelling of approved make in ceiling and walls of Rooms including necessary frame work and cornice complete as directed by EIC |
| 39 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100x10 mm |
| 40 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to requiredcolour and shade with necessary screws etc. complete 100 mm |
| 41 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm |
| 42 | Providing and fixing of Aldrop of approved make / quality as directed by EIC. |
| 43 | Carriage of material by mechanical transport including all loading / unloading complete |
| 44 | Sand Aveg. lead of 25 Km |
| 45 | Stone Agg. Aveg. lead of 20 Km |
| 46 | Providing and fixing of following types of switches, sockets, with Gang box and allied accessories including dismantling of existing switches and sockets with terminations as required. |
| 47 | 6A switch only piano type |
| 48 | 6A socket only piano type |
| 49 | 16 A piano switch socket combined with PVC box |
| 50 | 6 A Modular switch |
| 51 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point including 1.5 sq.mm FR PVC insulated copper conductor single core cable as required for restoration of the supply in existing surface / recessed steel/medium class PVC conduit |
| 52 | Group A |
| 53 | Group B |
| 54 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ medium class PVC conduit as required (as per Schedule) Finolex/Polycab/Havells/Anchor/KEI make |
| 55 | 2 x 2.5 Sqmm |
| 56 | 2 x 4 sqmm |
| 57 | Supply and fixing of following sizes moduler base Plate and cover plate on existing modular metal boxes etc as required for moduler swtiches |
| 58 | 12 Modular |
| 59 | 8 Modular |
| 60 | 6 Modular |
| 61 | 4 Modular |
| 62 | 3 Modular |
| 63 | Providing and fixing of following type of MCB's/switch gear of 10 KA or more capacity series including testing and necessary terminations. |
| 64 | 63 A DP |
| 65 | 32 A DP |
| 66 | 6A-32A MCB's |
| 67 | Providing and fixing of following MCB distribution boxes double door with inbuilt tinned copper heavy duty bus bars for earth, earth, and jumpers of proper current ratings. |
| 68 | 16 way SPN |
| 69 | Providing and fixing of LED lights of following type including necessary terminations as required. |
| 70 | T-5 LED 4' long 20 watt |
| 71 | T-5 LED 2' long 9 watt |
| 72 | 12 watt concealed/ surface LED panel lights |
| 73 | Providing and fixing of fan dimmers of Piano type heavy duty heavy duty. |
| 74 | Providing and fixing of two modular stepped type fan dimmers including necessary terminations as requried |
| 75 | Providing and fixing of 48\\" Sweep ceiling fan, 3 blade with allied accessories complete including necessary terminations |
| 76 | Providing and fixing of Phenolic sheets of desired shapes and sizes incluting cutting, finishing, drilling etc. |
| 77 | Providing and fixing of exhaust 150mm Shutter type including terminations as required |
| 78 | Providing and fixing of following sizes of PVC battens along the wall or ceiling including dismantling of existing damaged battens. |
| 79 | 1\\" wide surface batten 6 feet long |
| 80 | 1.5\\" wide surface batten 6 feet long Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender