Tender For Construction Of Sentry Posts At Antf/Sia Building Humhama Srinagar Under Account Head Building And Structures In Demand-51 Police.
Tender Value
9.68 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
1 days left
EMD
19360
Bank guarantee accepted
Document Fee
700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sentry Posts At Antf/Sia Building Humhama Srinagar Under Account Head Building And Structures In Demand-51 Police.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge All kinds of soil |
| 2 | Providing and laying of stone soling / boulders hand packed dry including ramming, dressing, watering all complete and cost of material involved complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing & reinforcement All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for Columns, pillars, piers, abutments, posts and struts. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 13 | Extra for brick work with common burnt clay bricks/ cement concrete bricks in superstructure above plinth level upto floor five level |
| 14 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 15 | 15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement: 6 fine sand) |
| 16 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded |
| 17 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete 1st class Silver wood |
| 18 | P/F Hi rib profiled Pre-colour coated sheets of eco-friendly colour comprising 0.50mm thickness for roofing including hooks, bolts and nuts 8mm dia or with PVC limpet washers complete upto any pitch in horizontal/ vertical or curved surfaces excluding the coat of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by EIC. |
| 19 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 20 | Providing and fixing plained eaves boarding 2nd class kail wood 250x32 mm (nominal size ) |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Second class kail wood |
| 22 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class Kail wood |
| 23 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class Kail wood |
| 24 | Providing and fiixng of 12mm thick T&G planks made of imported wood (New Zealand pine or equivalent) for roof soffits and ceiling on wood work in flase ceiling, partitions sawn and put-up in position in budloo wood (Frame work) including cost of necessary adhesive and cost of nails/ screws etc complete Job. including cost of Polish/ Finishing to be approved by EIC |
| 25 | Providing and fixing of 3.5mm thick ordinary glass panes for openings of windows incluidng wooden beeding etc all complete. |
| 26 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Particle Board 12mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked |
| 27 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick |
| 28 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 29 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 30 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 32 | Carriage of material by mechanical transport including all loading / unloading complete |
| 33 | Sand Aveg. lead of 20 Km |
| 34 | Crushed Stone Aveg. lead of 20 Km |
| 35 | Bricks Aveg. lead of 30 Km |
| 36 | Providing and fixing of following types of switches, sockets, with Gang box and allied accessories including dismantling of existing switches and sockets with terminations as required. |
| 37 | 6A switch only piano type |
| 38 | 6A socket only piano type |
| 39 | 16 A piano switch socket combined with PVC box |
| 40 | 6 A Modular switch |
| 41 | 6 A Modular socket |
| 42 | 16 A Modular switch socket combined with gang box |
| 43 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point including 1.5 sq.mm FR PVC insulated copper conductor single core cable as required for restoration of the supply in existing surface / recessed steel/medium class PVC conduit |
| 44 | Group A |
| 45 | Group B |
| 46 | Group C |
| 47 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ medium class PVC conduit as required (as per Schedule) Finolex/Polycab /Havells /Anchor/KEI make |
| 48 | 2 x 2.5 Sqmm |
| 49 | 2 x 4 sqmm |
| 50 | 2 x 6 sqmm |
| 51 | 2 x 10 sqmm |
| 52 | Supply and fixing of following sizes moduler base Plate and cover plate on existing modular metal boxes etc as required for moduler swtiches |
| 53 | 12 Modular |
| 54 | 8 Modular |
| 55 | 6 Modular |
| 56 | 4 Modular |
| 57 | 3 Modular |
| 58 | Providing and fixing of following type of MCB's/switch gear of 10 KA or more capacity series including testing and necessary terminations. |
| 59 | 63 A DP |
| 60 | 32 A DP |
| 61 | 6A-32A MCB's |
| 62 | Providing and fixing of following MCB distribution boxes double door with inbuilt tinned copper heavy duty bus bars for earth, earth, and jumpers of proper current ratings. |
| 63 | 16 way SPN |
| 64 | 08 way SPN |
| 65 | Providing and fixing of LED lights of following type including necessary terminations as required. |
| 66 | T-5 LED 4' long 20 watt |
| 67 | T-5 LED 2' long 9 watt |
| 68 | 12 watt concealed/ surface LED panel lights |
| 69 | 12 Watt LED Lamps |
| 70 | Providing and fixing of fan dimmers of Piano type heavy duty heavy duty. |
| 71 | Providing and fixing of two modular stepped type fan dimmers including necessary terminations as requried |
| 72 | Providing and fixing of 48\\" Sweep ceiling fan, 3 blade with allied accessories complete including necessary terminations |
| 73 | Providing and fixing of Angle/straight holders including terminations |
| 74 | Providing and fixing of Phenolic sheets of desired shapes and sizes incluting cutting, finishing, drilling etc. |
| 75 | Providing and fixing of 400mm Sweep wall fan with allied accessories complete including necessary terminations |
| 76 | Providing and fixing of exhaust 150mm Shutter type including terminations as required |
| 77 | Providing and fixing of following sizes of PVC battens along the wall or ceiling including dismantling of existing damaged battens. |
| 78 | 1\\" wide surface batten 6 feet long |
| 79 | 1.5\\" wide surface batten 6 feet long |
| 80 | Supply and laying of following unarmoured, PVC insulated, aluminium cables. |
| 81 | 25 sqmm 2- core |
| 82 | Supply,assembling,installation of (as per approved sample) 30 watt LED flood Light powder coated, pressure die cast aluminium housing with heat sink IP 66 protected, with i/p AC90-300V. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender