Tender For Development Of Play Field Khal Rambagh, Installation Of 06 High Mast Lights In Marinambal Play Field At Badsha Nagar And Providing Of Motorised Roller For Harinambal And Khal Play Fields.
Tender Value
1.80 Crore
Estimated cost
Bid Submission
16 Oct 2026
13 days left
EMD
3.61 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Play Field Khal Rambagh, Installation Of 06 High Mast Lights In Marinambal Play Field At Badsha Nagar And Providing Of Motorised Roller For Harinambal And Khal Play Fields.
BOQ
| Sl. No. | Item Description |
| 1 | Change Room Earth work in in excavation by manual means in trenches for foundation,drains,pipes cables,etc not exceeding 1.5 m in width and for shafts,wells,and the like not exceeding 10 sqm on plan,incl.dressing of sides and ramming of bottoms lift upto 1.5 m including getting out excavated earth and disposal of surplus excavated earth asdirected kinds of soil |
| 2 | Providing supplying and stacking of soling including laying ramming complete as per direction of engineer incharge incl. all carriages |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 mix incl. all carriages lead and lifts complete job.incl carriage |
| 4 | P/L in position cement concrete of specified grade excl. the cost of centering and shuttering all work up to plinth level 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone crushed aggregate 20mm Nominal Size |
| 5 | Reinforcement for RCC work incl. straightening, cutting, placing in position and binding all complete (Comforming to IS:1786-1985) upto floor 5 level complete job incl. all carriages. |
| 6 | Providing and laying in position cement concrete of speacified grade excluding the cost of shuttring all works upto plinth level in 1:3:6)( 1 cement: 3 coarse sand: 6 graded stone crushed aggregate 20mm Nominal Size |
| 7 | Centering shuttering, strutting and propping etc and removal of form work in incl. all leads lifts, carriages and scaffolding etc complete job (a)(foundation etc). |
| 8 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure in plinth level upto floor level in 1:6 mix incl. curing complete including extra for Brick Work |
| 9 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 10 | P/F HI RIB precoatged galvalume profile sheets 0.50mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and self tapping fasteners of reputed make and fixing flashings, valleys, ridges of colour coated galvalume plain sheet using incl. verticle/curved surface fixed with self drillen dash fasteners or polymer coated J or L Hooks, bolts and nuts 8mm dia with bitumen and Gl Limper washers Excl. the cost of Purlins, rafters and Trusses and but inl. cutting to size and shape wherever required all complete self deilling and self tapping fasteners of reputed make and self tapping fasteners of reputed make complete and as directed. the contractor shall have to provide a minumum 5 years warantee for sheets against deterioration, disintegrations loss of luster, variation in colour shade etc and leakages across laps fasteners etc all type of steel sheets shall be load tested to satisfy 1.10 times the design wing load and coated thickness to the satisfaction of the Engineer-in-Incharge,incl.ridges and hips of width plain gs hook bolts |
| 11 | Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly einforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and ecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single toughned glass pane lazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 12 | Providing and fixing 1st quality ceramic glazed floor tiles conformingtoIS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle green, black of anysize as approved by Engineer-in-Charge in skirting, risers of steps anddados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm includingpointing in white cement mixed with pigment of matching shadecomplete |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete |
| 14 | Providing andfd fixing of colour coated sheet of thickness 0.4mm for soffits incl. all necessary fittings and carriages complete |
| 15 | P/F of 60mm Puff panels of approved quality and collour incl. cos of nuts and other items required for fixing of pannels complet (thickness of G.I not less than 0.050) |
| 16 | 12 mm thick cement plaster in walls in 1:6 sand and cement ratio |
| 17 | Providing and applying 2mm white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to proepare the surface even and smooth complete. |
| 18 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing toedges to give high gloss finish etc. complete at all levels (Area of slab upto 0.5 sqm) |
| 19 | P/F in position Polyethylene Septic tank type-B (Comfort or equivalent) having capacity for 20 users 47\\"x51\\"x119\\" inches in Size, including excavation of put as per the size, providing and laying of 150mm thick bed concrete in 1:4:8 mix (1 cement:4 cource sand:4 graded stone agg. 20mm nominal siz) filling the septic tank with fresh water , connecting the inlet and outlet with the septic tank and filling dry cource of sand and bajre around the septic tank complete job including carriage of all materials involved. |
| 20 | Supply and laying of precast RCC rings incl earth work in excation and RCC cover in M20 grade with reinforcement for soakage pit upto 14ft depth complete job. |
| 21 | P/F of wall cladding of superior quality weather proof over the surface incl. plastering over 25mm thick base cement mortar incl filling of joints with matching shade on plinth complete job. |
| 22 | P/F of following PVC Pipes & Fittings of standards quality & make (b Type) prince or equivalent incl. Jointing/Testing complete(A) 100mm dia |
| 23 | (B) 75mm dia |
| 24 | ( C) 50mm dia |
| 25 | P/ F of following PVC Pipes & fittings of stamdard quality & make (B Type) Prince or equivalent incl. Jointing/Testing complete (A) Door Junction (100mmx100mmx75mm) |
| 26 | Door Bend(75mmx75mm) |
| 27 | P-Trap |
| 28 | Floor Trap(100mm) |
| 29 | Collar 100mm with Rubber Washer |
| 30 | Collar 75mm with Rubber Washer |
| 31 | Cowl 75mm Size |
| 32 | Plain Bend 100 mm |
| 33 | Plain Bend 75mm |
| 34 | Tee 100mm |
| 35 | Tee 75mm |
| 36 | P/F of PVC water Storage Tank four layer Vectus or eq. |
| 37 | Construction of Brick Masonry Inspection Chamber (450x450)mm inside depth 600mm in brick work in cement mortar 1:4 mix, RCC top slab with 1:2:4 mix, foundation concrete in 1:4:8 mix inside plastering 12mm thick in cement mortar 1:3 mix with floating coat of neat cement and amking channels complete, incl. cost of manholes frmae & Cover of required size of standard quality and carriages of all materials involved complete. |
| 38 | P/F of water closet squarting (W.C) indian type Orissa pattern white vitereous China with 100mm PVC \\"B type\\"P or S Trap, 10Litre Capacity low level fluishing cistern of approved make with flush cistern of approved make with flush pipe, manually controlled device (handle lever ) with all fittings and the walls and floors whenever required (580x440mm with integral type foot rest). |
| 39 | S/F of PPR pipes incl all fixtures like elbows, tees, sockets, etc and cutting the walls and making good the walls complete job (A) 32mm Dia |
| 40 | (B) 25mm Dia |
| 41 | (C) 16mm Dia |
| 42 | Providing and fixing 100 mm sand cast iron grating for gully trap |
| 43 | Tank Nipple 32mm dia |
| 44 | Tank Nipple 25mm dia |
| 45 | P/F of PPR gate value with CI wheel of approved quality (ISI mark)(A)25mm dia |
| 46 | (B) 32mm dia |
| 47 | Providing and fixing white vitrous china wash basin size 630x450mm with Pedestal of approved make CP brass basin mixer(Jaquar/Hindware of equivalent make), including Paintings of fittings and brackets, cutting and making good the wall whenever required. |
| 48 | P/F of Electric geyser Venus, Racold or equivalent make incl. C.P Connections and all fixtures (50ltr capacity). |
| 49 | P/F of looking mirror of superior glass (of approved quality), rectangular size (450x350mm) with plastic molded frame of approved make and shade with 6mm thick hard board backing. |
| 50 | P/F PTMT Towel Rail complete with brackets fixed to wooden cleats with CP Brass screws with concealed fitting arrangements of approved quality and colour. |
| 51 | P/F of PVC waste pipe for counter basin/wash basin(32mm dia) |
| 52 | P/F of C.P Brass fittings of standards quality and make (Jaquar or eq.)(A) AC Brass BIB Cock 15mm |
| 53 | (B) AC Brass BIB Cock 15mm Long Nose |
| 54 | P/F of CP Angle Valve 15mm dia Concealed type |
| 55 | P/F of two way C. P Brass wall Mixer with arrangements for shower excl. cost of shower of approved quality (Jaquar or eq). |
| 56 | P/F of CP Brass Shower Rose with 15/20mm inlet. |
| 57 | P/F of PVC Connection with CP Nuts Superior. |
| 58 | P/F of two way C. P Brass Basin Mixer of approved quality and make (Jaquar or eq). |
| 59 | Finishing exterior walls with ready mixed water proofing cement based paint of approved brand and manufactures and of required shade to give an even shade two or more @ 3.84kg/10Sqm. |
| 60 | Finishing walls with premium acrylic smooth exterior paint woth silicone additives of required shade on new work (two or more coats applied @ 1.43litres/10Sqm over including priming coat of water exterior aint applied @2.20 Kg/10Sqm |
| 61 | Kota Stone For Skating RinkEarthwork in excavation by manual means in trenches for foundation drains pipes etc not exceeding 1.5mtr in width and not exceeding 10 sqm on plan depth upto 1.5mtr including backfilling of soil & disposal of excavated soil to be leveled and neatly dressed within 25mts lead. |
| 62 | Supply and laying of dry stone soling duly hand packed incl spreading levelling and consolidation with 8-10 T PPR roller upto gradient required incl all carriage complete job |
| 63 | Providing and laying in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level .(1:4:8 ) stone aggregate 40mm nominal size aggregate |
| 64 | Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing all work upto plinth level in 1:2:4 (1 cement : 2coarse sand : 4graded stone aggregate 20mm nominal size) |
| 65 | Centering & shuttering including strutting, propping etc. and removal of formwork etc Foundations, footings, bases for columns |
| 66 | Steel work welded in built up sections trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required |
| 67 | P/F of 50x50 mm chainlink fencing made of GI Wire of 4 mm dia incl. straightening with nuts and bolts |
| 68 | 12 mm thick cement plaster of mix 1:4(1 cement:4 fine sand) |
| 69 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats incl a coat of steel priemer |
| 70 | 50 mm thick cement concrete flooring in 1:2:4 (1 cement : 2coarse sand : 4graded stone aggregate 20mm nominal size) with floating coat of neat cement incl all carriages complete.. |
| 71 | providing and laying 25 mm thick kota stone over 20 mm thick avg base laid oveer and jointed with grey cement slurry with matching pigment incl rubbing polishing curing complete with cement mortar in 1:4 ratio |
| 72 | Carriage of materials by M.T from source to site of worka) Sand, stone aggregate for an average lead of 15 kms |
| 73 | Net Practice Pitch Earthwork in excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All Kinds of Soil |
| 74 | P/L of stone soling hand packed,incl ramming with heavy rammer incl. all carriage upto site of work |
| 75 | P/L in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level (1;4;8) stone aggregate 40 mm nominal size crushed aggregate (Including carriage ) |
| 76 | P/L in position Reinfored cement concrete of specified grade excluding the cost of shuttering and centring finishing and reinforcement all work upto plinth level 1:1.5:3 Mix |
| 77 | Steel reinforcement for RCC work incl straightening ,cutting, hoisting ,placing, in position all complete (TMT Bars incl. Carriage |
| 78 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. CHS 60.3 OD (3.0mm) |
| 79 | Centering and shuttering incl shuttering propping etc and removal of form work for foundation footing bases of columns |
| 80 | P/F of synthetic polythene twin thickness knotted net 3 mm guage and 50x50 mm mesh |
| 81 | Carriage of materials by M.T from source to site of worka) Sand, stone aggregate for an average lead of 15 kms |
| 82 | Cricket Competition PitchEarth work in Excavation by Mechanical Means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 83 | Consolidation of Pitch base to required gradient and x-section using PRR of 8-10t to achieve the required density |
| 84 | P/L of stone soling hand packed,incl ramming with heavy rammer incl. all carriage upto site of work |
| 85 | S/L of coarse sand incl. sieving of sand properly to remove any foreign substance and laying in layers not exceeding 50mm in depth and surface to be flooded with water incl. carriage of sand from near source |
| 86 | S/L of sandy loom (mixture of fine sand and fine clay) in ratio 1:10 to be laid in layers not exceeding 50mm in depth and consolidation with 1/2 tonne roller or plate vibrator |
| 87 | S/L of top layer of earth having highest clay content available to be laid in layers not exceeding 50mm in depth and consolidation with 1/2 tonne roller or plate vibrator |
| 88 | P/fixing 15x15 feet cricket canvas sight screen and is movable foldable with stable MS section frame with channel base with 4 SPecial turf tyres allowing easy movement with color black on one side of sight screen and white color on other side |
| 89 | GateEarthwork in excavation by manual means in trenches for foundation drains pipes etc not exceeding 1.5mtr in width and not exceeding 10 sqm on plan depth upto 1.5mtr including backfilling of soil & disposal of excavated soil to be leveled and neatly dressed within 25mts lead. |
| 90 | Supply, Stacking and laying of dry stone soling duly hand packed incl. all carriages complete. |
| 91 | Providing and laying in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level .(1:4:8 ) stone aggregate 40mm nominal size aggregate |
| 92 | Providing and laying in position Reinforced Cement Concrete in 1:2:4 mix (1 Cement:2 coarse sand: 4 graded stone agg. 20 mm nominal size) in foundations upto plinth level etc excluding cost of Reinforcement, centerin and shuttering Complete |
| 93 | Centering & shuttering including strutting, propping etc. and removal of formwork etc Foundations, footings, bases for columns |
| 94 | Reinforcement for RCC work incl. straightening, cutting placing in position and binding all complete. Fe 500 Grade ( conforming to IS : 1786-1985) upto floor 5 level. Icl. All consequential and incidental costs like all leads, lifts, carriages and scaffolding etc complete job. |
| 95 | Structural steel work welded in built up sections and tubular steel using squares, rectangular tubes pipes etc work incl. cutting, hoisting, fixing in postion and applying steel priming coat of approved steel primer etc. |
| 96 | Painting on steel work with synthetic enamel paint of approved brand and manufacture in all shades to given an even shade (two or more coats) complete job. Incl priming coat. |
| 97 | Manufacturing supplying and fixing Retro Reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). |
| 98 | Carriage of materials by M.T from source to site of worka) Sand, stone aggregate for an average lead of 15 kms |
| 99 | Synthetic Volleyball CourtPreparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters. with earth or quarry spoils etc. and re-rolling the subgrade. |
| 100 | Supply and laying of GSB (Granular Sub base course) incl spreading, levelling and consolidation (power road roller 8-10 tonne capacity) to required gradient camber including all carriage complete job. |
| 101 | Supply and stacking of graded stone aggregate, moorun and stone screening at site incl. laying of water bound macadam with specified stone aggregate, stone screening and binding material incl. screening sorting spreading to template and consolidation with power road roller 8-10 tonne capacity will all carriages complete base course (G2) with (63-45) mm size incl. stone screening 13.2 mm size. complete incl carriage for an average lead of 60 Km (finished work to be measured) |
| 102 | Providing and laying wet mix macadam on prepared sub grade/sub base with crushed quarry stone aggregate of specified grading as per IRC/MOST specification including mixing crushed material with predetermined quantity of water in accordance with specification to form dense mass which is spread and rolled with vibratory roller 80/100KN capacity speed of which should not exceed 5KM/Hour for each layer, rolling should continue till 98% density is achieved to approved grade and X-section the mixing is to be prepared in approved mech, mixing plant of suitable capacity including laying of cold emulsion with pressure sprayer at the rate 0.75 kgs/sqm complete, including cost of all materials, all leads lifts octroi charge taxes etc. |
| 103 | P/F of artificial UV resistanat polyethylene synthetic grass with rigid monofilment yarn, 40mm pile height and 1250g/sqm pile weight with total carpet weight not less than 2500g/sqm and infiill in the ratio of 2:1 with sand(size of sand 0.2mm-1.0mm) 15mm (minimum)height and Rubber 8mm(minimum)height infill weight not less than 2.25kg/sft .The stitch rate per meter should be minimum of 285 All line marking shall be white, unless in the drawings. line marking shall be sitched 'tufted' material (painted lines are not acceptable) the carpet should be laid as per the manufacturers manual incl. All applicable taxes, Lavies, Octoria, transportation loading/unloading complete. |
| 104 | Supply of Volleyball post set of standard quality and make made of heavy duty 75mm round steel pipe with telescopic system for height adjustment, provided with wheels for smooth shifting and levelers to adjust height on uneven surfaces, complete including all applicable taxes, royalties, lavies etc incl. loading/unloading assembling erecting and adjusting at site and all leads and lifts complete. |
| 105 | PathEarthwork in excavation by manual means in trenches for foundation drains pipes etc not exceeding 1.5mtr in width and not exceeding 10 sqm on plan depth upto 1.5mtr including backfilling of soil & disposal of excavated soil to be leveled and neatly dressed within 25mts lead. |
| 106 | P/L stone soling hand packed incl ramming with heavy rammers all carriage upto site of work |
| 107 | P/L in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level (1;4;8) stone aggregate 20 mm nominal size incl all carriages bt M. t for an avg. lead of 20 Kms complete. |
| 108 | P/L in position cement concrete of specified grade excluding the cost of shuttering and centering finishing and reinforcement all work upto plinth level (1:2:4) stone aggregate 20mm nominal size aggregate 20 mm nominal size incl all carriages bt M. t for an avg. lead of 20 Kms complete. |
| 109 | Chequerred pre cast cement conctete tieles 22mm thick in path and court yard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing cleaning and curing complete on 20mm thick bed of cement mortar 1:4 mix (1cement : 4 coarse sand) ordinary cemment without any pigments etc. complete. |
| 110 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 111 | SEATING TIEREarthwork in excavation by manual means in trenches for foundation drains pipes etc not exceeding 1.5mtr in width and not exceeding 10 sqm on plan depth upto 1.5mtr including backfilling of soil & disposal of excavated soil to be leveled and neatly dressed within 25mts lead. |
| 112 | P/L stone soling hand packed incl ramming with heavy rammers all carriage upto site of work |
| 113 | Providing and laying in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level .(1:4:8 ) stone aggregate 40mm nominal size aggregate |
| 114 | Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing all work upto plinth level in 1:2:4 (1 cement : 2coarse sand : 4graded stone aggregate 20mm nominal size) |
| 115 | Centering & shuttering including strutting, propping etc. and removal of formwork etc Foundations, footings, bases for columns |
| 116 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Thermo-Mechanically Treated bars |
| 117 | structural Steel work welded in built up sections trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required |
| 118 | Painting on steel work with synthetic enamel paint of approved brand and manufactureto give an even shade. |
| 119 | Carriage of materials by M.T from source to site of worka) Sand, stone aggregate for an average lead of 15 kms |
| 120 | Supply of dugout structure fabricated from MS tube having minimum dimension of 50 x 50mm Square Tube detachable framework with powder coated matt finish. The height of the dugout will be 2.05 meter at front side, Curved surface roof and 4.9 mtr length The seating capacity will be of 10 players. The structure will be covered with 3mm thick transparent or colored polycarbonate sheet on top and two sides.Wheel Assembly – Solid tyre 10” wheel attached to dugout for easy movement without any damage to the sports field.The Structure is Provide with HDPE Blow Molded Seat:Double-wall hollow blow mold bucket type seat having minimum dimensions as 465 mm side length x 440 mm front width x 390 mm rear height in one piece of HDPE having minimum shell thickness of 2 mm on each wall. Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not be less than 1.9-2.1 kg. Chair should withstand in high temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, the chair should be fixed with Metal Inserts moulded inside seat to connect seat with sheet metal bracket which is mounted on 40x2mmS Square tube.Chair has a warranty of 2years against significant color fading and 5 Years against breakage due to manufacturing .chair plastic part tested with xenon-Arceposure Test as per ISO 48892-2:2013. Cycle-1.TheseatpassBSEN12520: 2015 TEST |
| 121 | SYNTHETIC BASKETBALL COURTEarthwork in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth,lead upto 50mtr and lifts upto 1.50 m as directed by eng.in charge. |
| 122 | P/L stone soling hand packed incl ramming with heavy rammers all carriage upto site of work |
| 123 | Providing and laying in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level .(1:4:8 ) stone aggregate 40mm nominal size aggregate |
| 124 | Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing all work upto plinth level in 1:2:4 (1 cement : 2coarse sand : 4graded stone aggregate 20mm nominal size) |
| 125 | Centering & shuttering including strutting, propping etc. and removal of formwork etc Foundations, footings, bases for columns |
| 126 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Thermo-Mechanically Treated bars |
| 127 | Supply of FIBA approved synthetic modular suspended interlocking sports flooring for an outdoor basket ball court of international standard. (304.8mmx304.8mmx15.88mm) high impact pp(polypropylene) suspended floor tie with 841 individual support legs weight 13oz (370.59g) with required interlocking incl. all taxes, royalities, VAT, all leads, lifts and carriage complete |
| 128 | Supply of basketball goal set of standard quality and make made of heavy duty tube structure with spring loaded system for height adjustment at different levels, along with 20mm acrylic board, dunking rings and padding for the safety of players, provided with wheels for smooth shifting and levelers to adjust height on uneven surfaces, complete including all applicable taxes, royalties, lavies etc incl. loading/unloading assembling erecting and adjusting at site and all leads and lifts complete. |
| 129 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing,specification and direction of Engineer-in-charge incl framing of Tubular structural steel |
| 130 | Carriage of materials by M.T from source to site of worka) Sand aggregate for an average lead of 25 kms |
| 131 | b) stone aggregate for an average lead of 15 kms |
| 132 | Earth filling levelling and turfing S/S Filling of good quality sweet earth in layers not exceeding 20 cm in depth incl breaking clods, watering rolling each layer with 1/2 t roller and top with 8-10 T roller and leveliing dressing incl. all carriage upto site cj(Compacted qty to be measured) |
| 133 | Levelling of ground (top surface) by way of engagement of skilled labours and sweet earth for undulations to the required gradient and profile as direcetd at site |
| 134 | Grassing with selection No. 1 grass (in patches 5 cm apart in eaither direction) including supplying/spreading of sand as desiredb, watering and maintenance of lawn for 60 days or more till grass forms thick lawn free from weeds and fit for moving incl all leads lifts and carriage complete |
| 135 | ElectricficationSupply, installation, testing, and commissioning of a 7-meter-long octagonal galvanized lighting system pole of 4 mm thickness, with bottom and top diameters of 70 mm and 130 mm respectively, and base plate size of 225 mm × 225 mm × 12 mm (as per PLG 07 of ILP UK Technical Report No. 7 of ILE UK / IS:875 Part 1-2015 / BS EN 10025 / IS:2062),consisting of totally hot-dip galvanized single- dipped method lantern carriage suitable for up to 4 nos. luminaires with welded frame suitable for stadium lighting, including junction box for light connections with 40A connector, mast head frame assembly with full cover type sustaining integral power tool accessible from door with padlocking arrangement, stainless steel foundation bolts 600 mm long and 20 mm dia, EPR insulated PCP sheathed 5-core × 4 sq.mm trailing cable. The mast shall be provided with a 60A connector inside the pole. OEM must have a type test certificate.Philips/Bajaj/Anchor or equivalent make. |
| 136 | Supply, installation, testing, and commissioning of250 Watt LED Flood/Stadium Luminaire, having powder-coated single-piece pressure die-cast aluminium housing with heat dissipation fins and UV-stabilized PC/toughened glass cover, complete with secondary lens on each LED. LEDs shall be SMD type of 3–5 Watt each. The luminaire shall have a minimum system efficacy of 125 lm/W with potted driver, unique BIS registration number, and operating input voltage range of AC 120–270 V with high-voltage cut-off and auto-resetting protection. Power factor shall be greater than 0.95, driver efficiency greater than 85%, operating temperature range from -5°C to 45°C, and driver current less than 750 mA. The luminaire shall be BIS and trademark certified, with minimum life expectancy of 50,000 burning hours, CRI >70, and CCT 5700K. Surge protection shall be from 4KV to 10KV. Fixture shall comply with IS 10322 standards. LM79/LM80 test certificates/reports along with OEM warranty shall be submitted. Philips/Havells/Crompton orequivalent make. |
| 137 | Supply, laying, connecting and commissioning of 10sq.mm 4 core XPLE/PVC insulated and steelarmoured 1.1KV grade aluminium LT cableincluding cost of required Al. Thimbles dulycrimped. Havells/KEI/Polycab or equivalent make. |
| 138 | Supply and laying DWC HDPE Pipe 40 mm OD. Pipe along with all accessories like sockets, bends,couplers etc. |
| 139 | Supply and drawing FRLS PVC insulated 1.5 sq.mm3 core copper cable through pole to the light. |
| 140 | Supply, installation, testing and commissioning of Main outdoor type weatherproof panel of 3mm thickness (size 3’x4’) including stand double door with locking arrangement. The panel should include ammeter, voltmeter, TPN MCCB 100amp, 4 noaluminium bus bar, TPN 32A 7 No. |
| 141 | Supply, laying, connecting and commissioning of 35 sq.mm 3.5 core XPLE/PVC insulated and steel armoured 1.1KV grade aluminium LT cable including cost of required Al. Thimbles dulycrimped. Havells/KEI/Polycab or equivalent make. |
| 142 | Supply, installation, testing and commissioning of 10KVA Gen set complete with all accessories. AshokLeyland/Mahindra/Kirloskar or equivalent make. |
| 143 | Construction of pole foundations with a depth of 4 ft and cross-section of 2 ft × 2 ft, using M20 grade cement concrete, including reinforcement steelweighing 30 kg per foundation. |
| 144 | Excavation for laying of underground cable all around the stadium with a depth of 2 ft. |
| 145 | Earthing with 4.5 m long and 40 mm dia GI earth pipe, including all accessories, masonry chamber with cover plate and locking arrangement, watering pipe, charcoal/coke, and salt as required, complete in all respects for distribution box/feeder panel andgenset. |
| 146 | Providing and fixing GI wire spiral earthing for poles. |
| 147 | Providing, supply, delivery, installation, Op testing and commissioning of 2 Ton 10 Ride-On EV Roller with Electric Transmission, complete in all respects as per specifications.Operating Weight: 2000 kg. BL. DC Electric Motor; 60V 100Ah Maintenance Free Battery: Electric + Gearbox Transmission, Charging Time: 7-8 Hrs.: Operating Time: 5-6 Hrs., Mechanical Brake: Speed: 0-4 km/hr.; Wheel Diameter: 600 mm, Rolling Width: 1000 mm; Electrical Start: Head Light Fitted Canopy, Worm & Worm Wheel Steering |
| 148 | Electricfication for change roomSupply/Laying of 25mm PVC conduit /channels dully laid or fitted with the help of rawplugs, saddles, for carrying of wire for electric wiring /circuit etc complete. |
| 149 | P/F of lighting points as well as lighting circiut incl. point wiring through conduits with 1.5 Sqmm Multi Standard copper wire of approved make for light, fan points etc complete in all respects. |
| 150 | P/F of heating points as well as heating circiut incl. point wiring through conduits with 4 Sqmm Multi Standard copper wire of approved make for heating points etc complete in all respects. |
| 151 | Supply and fixing of 6Amp modular switches with pannel of standard quality of legrand, GM or eq. for lighting points/fan points. etc complete in all respect. |
| 152 | Supply and fixing of 6Amp modular 5 pin socket with pannel of standard quality of legrand, GM or eq. for lighting points/fan points. etc complete in all respect. |
| 153 | Supply and fixing of 16Amp modular switches with pannel of standard quality of legrand, GM or eq. for heating point, gyser point. etc complete in all respect. |
| 154 | Supply and fixing of 16Amp modular 5 pin socket with pannel of standard quality of legrand, GM or eq. for heating point, gyser point. etc complete in all respect. |
| 155 | Supply / Fixing of metal boxes recessed in wall for fiitng lighting switch pannel/heating switch pannel incl. resurfacing of wall with POP etc complete in all respect. |
| 156 | P/f of 1200mm sweep ceiling fan of approved qulaity and make incl. cost of fan dimmer and M.S hooks (if required) complete (USHA, Havells or eq.make) |
| 157 | P/F of 225mm sweep Exhaust Fan of approved quality (USHA, Havells or eq.make) |
| 158 | Supply/ installation/testing & commisioning of 40-63 Amp. TPN of legrand/indo asian/Havells or eq. make fitted in distribution boxes incl. making of necessary connections. etc complete. |
| 159 | Supply/ installation/testing & commisioning of 6-25 Amp. MCB's of legrand/indo asian/Havells or eq. make fitted in distribution boxes incl. making of necessary connections. etc complete. |
| 160 | Supply/ installation/testing & commisioning of 32-63 Amp. Double pole MCB's of legrand/indo asian/Havells or eq. make fitted in distribution boxes incl. making of necessary connections. etc complete. |
| 161 | Supply/fixing of 16 -32 way distributor board double door of legrand,ssk or eq. make having lockable doors for MCB's, the distridution board are to be fixed /recessed in walls incl. resurfacing of walls with POP as per requirement etc. compleet in all respect. |
| 162 | P/F of Concealed LED lights(600x600mmsize) 36watt of Standard quality of approved make, phillips, syska or equivalent. |
| 163 | P/F of Concealed LED lights 12watt of Standard quality of approved make, phillips, syska or equivalent. |
| 164 | Supply/ Fixing electric service line with 7/16 insulated copper wire Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender