Tender For Construction Of 125 Mm Dia Machine Drilled Bore Well Along-With Submersible Pumping Unit And Allied Installation To Be Carried Out At Reyaz Ahmad Khan Gujjar At Village Katsu Sallar In District Anantnag.
Tender Value
5.01 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
14 days left
EMD
15100
Bank guarantee accepted
Document Fee
100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 125 Mm Dia Machine Drilled Bore Well Along-With Submersible Pumping Unit And Allied Installation To Be Carried Out At Reyaz Ahmad Khan Gujjar At Village Katsu Sallar In District Anantnag.
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost of shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer. |
| 2 | P/F of MS 125mm dia pipe and subsequent lowering of casing assembly and its welding after every 10 feet/20 feet, up to the drilled/desired depth. The casing is to be slotted as per the site requirement and as directed by site engineer. The specifications of the tube well shall be as under as per IS 4270. |
| 3 | Providing, fitting and commissioning of single phase submersible type pumping unit along with allied jobs. Complete details of the job are as under: • P/F/T and commissioning of single phase pumping equipment with following specifications: Discharge = 600-800 GPHHead = 70 m - 90 mMotor Rating = Not less than 1.5 HP The pump motor is coupled together with a steel coupling. The job includes lowering of the submersible pump equipment and P/F of Starter |
| 4 | Providin/Fitting of risers 32 mm dia GI coloumn pipe (Class-B) pipe (03 meter in length) is propoerly threaded at both the ends. The pipe shall be provided and fitted with GI socket for joining purpose |
| 5 | Providing/Fitting of 5 KVA single phase automatic voltage stablizer, Dry type. The Job also includes P/F of copper wire of staible guage required for connecting of incoming and outgoing connections |
| 6 | P/F of submersible cable 2.5 sq. mm, connecting pumping unit. |
| 7 | P/F of 05 mm steel wire rope for holding sub type pumping unit. |
| 8 | P/F of 40mm dia MS holding clamps (02 Nos.) fabricated out of 10mm thick MS plate with nuts and bolts. |
| 9 | P/F of reducer 32mm dia–25mm = 01 No., reducer 40mm dia–32mm = 01 No. The job also includes providing and fitting of 32mm dia GI bend – 02 Nos., Well Cap Class-B. |
| 10 | Providing/Laying of Plain Cement Concrete block of size 4 ft × 4 ft × 1 ft in 1:3:6 mix to give adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The job includes providing/laying of PCC edges of 4\\" × 4\\" in 1:3:6 mix and P/L of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of shuttering, strutting, centering, curing etc. is included in the scope of work. In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender