Tender For Renovation Work Of Ramganj Inspection Building Located Under Irrigation Block Sultanupar.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Oct 2026
3 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
671
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sultanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Work Of Ramganj Inspection Building Located Under Irrigation Block Sultanupar.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. |
| 2 | Dismantling existing plaster, including disposal of refuse as directed by the Engineer-in-charge within distance of 60M. |
| 3 | 15mm cement plaster of mix 1:4 (1 cement :4 fine sand) |
| 4 | White washing two coat on surface including cost of all material T&P |
| 5 | Finishing walls with water proofing cement paint of required shade (Two or more coats applied @ 3.84 kg/10 sqm |
| 6 | Dismantling brick work including stacking of dismantled materials as directed by the Engineer-in-Charge with in a distance of 60 metres (200ft.) |
| 7 | Brick work with common burnt clay (non modular) bricks of class-150 in superstructure above plinth level upto floor V level in all shapes and size in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 8 | S/F of new angle iron of size 45x45x6 and 0.90 M long including cost of all material labour T&P etc. complete. |
| 9 | Providing barbed wire fencing including fixing into post and stretching of wire labour with T&P etc. |
| 10 | Painting of angle iron of size 45x45x6 and 0.90 M long including cost of all material labour T&P etc. complete. |
| 11 | Providing and laying of interlocking concrete block payment of grade M-30 having thickness 80 mm and including 25mm local send cushion below interlocking block as per drawing and technical specification clause 1504 (Excluding G.S.B.) |
| 12 | Raking out joints in lime or cement mortar and preparing the surface for re- pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 13 | 12mm Plastering with 1:4 cement mortar on brick work of wall including all cost of material. |
| 14 | Providing and applying plaster of putty 2mm thickness over plasterd surface to prepare the surface even and smooth complete. |
| 15 | Dismantling cement concrete or brick or granolithic floors, including base concrete and including stacking of dismentled materials as directed by the Engineer-in-charge with in a distance of 60m |
| 16 | C C 1:1.5:3 forRepair of Roof 40 mm thick |
| 17 | P.C.C. work in 1:3:6 40mm gauge brick ballast including cost of all material. |
| 18 | P/L Vitrified Floor Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%, conforming to IS 15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete b) Size of Tile 600x600mm |
| 19 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622. of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1) Cement: 4 Coarse sand), jointing with grey cement slurry 3.3 kg/ sam including grouting the joints with white cement and matching pigments etc., complete |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 21 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry |
| 22 | P/F of Murga Jali for Repair of roof |
| 23 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around |
| 24 | Dismantling door or window i/c chaukhat with hold fast and i/c stacking of materials as directed by Engineer in charge within a distance of 60M. |
| 25 | Providing wood work in frames of doors, windows. Clerestray window and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fasyt lugs or dash fasteners shall be paid of separately) Second Class Teak Wood |
| 26 | Provided and fixing Pannel Door and Window |
| 27 | Anodised Aluminium butt hinges 100x63x4 mm |
| 28 | Anodised Aluminium tower bolt (barrel type) 300x10 mm |
| 29 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 30 | Anodised Aluminium sliding door bolt 300x16 mm |
| 31 | Painting one coat of wooden primer on new wooden surface including thoroughly cleaning of dirt and other foreign matter and sand papering and making smooth surface including cost of all material, labour T&P etc. required for proper completion of work. |
| 32 | Painting two coat of superior quality of synthetic enamel paint approved make as per item No.12 on new wooden surface (excluding cost of primary) including cost of all material, labour T&P etc. required for proper completion of work |
| 33 | S/F of Approved mosquito mesh on window including cost of all materials |
| 34 | Fabrication of mild steel / door work in grill and window frames i/c cutting drilling, welder reveting and hings i/c cost of all materials, labour T&P etc required for proper completion of work |
| 35 | Providing and fixing tiled false ceiling of specified materials of size 595x595mm in tree horizontal level. |
| 36 | PLUMBING WORKProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c foxing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc15 mm nominal outer dia Pipes |
| 37 | 25 mm nominal outer dia Pipes |
| 38 | Providing and fixing soil, waste and vent pipes100 mm dia |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and Litre overflow pipes but without fittings and the base support for tank. |
| 40 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe.with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 41 | P/F 10 Lit. Capacity Low level flushing cistern(white vitreous china clay) of standard approved make complete with all accessories and fittings. |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requiredWhite Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 43 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan |
| 44 | P/F chromium plated copper pipe connection for sink, wash basin, cistern, gyger etc. with two nos. CP nuts.450 mm long |
| 45 | P/F PVC waste pipe for sink/wash basin with cost of all material, labour, T&P etc complete. |
| 46 | Providing and fixing C.P. brass bib cock of pproved quality conforming to IS:893115 mm nominal bore |
| 47 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
| 48 | Providing and foxing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931.15 mm nominal bore |
| 49 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore |
| 50 | P/F best India make proper copper alloy gate valve and check valve (Class-I) IS 778-1980 with iron wheel head etc complete15mm dia. |
| 51 | P/F 15mm nominal sizes, CP stop cock |
| 52 | P/F in position CP brass towel rail complete with brackets including dilling holes in walls and repairing the same in 1:3 CM complete750×20 mm |
| 53 | P/F CP Jali for Nahani tap 100 mm dia including cost of all materials |
| 54 | Fixing CP brass soap dish with CP brass bracket fixed at place with wooden plugs/ plastic sleeves etc with CP brass screws complete |
| 55 | P/F 100mm size P or S trap for WC or Squatting pan including jointing the trap with the pan & pipe in CM 1:1 (1 part cement: 1 part fine sand). |
| 56 | P/F 100mm dia CP shower rose with 15 mm/20 mm inlet complete. |
| 57 | P/F Mirror of following size of approved make with teak wood moulded frame and 6 mm thick hardboard back base inclusive of all material, labour, T&P etc.900 × 450 mm |
| 58 | P/F 100 mm SW glazed ―Tee with necessary clamp etc. in septic tanks complete. |
| 59 | Submersible pump and boring with commisoning |
| 60 | ELECTRICAL WORKPoint wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. conduit (MMS) ISI marked of suitable size and 1.5sq. mm. PVC FRLS insulated copper earth continuity conductor of green colour inside conduit etc. as required as per specification for :-Primary long point |
| 61 | Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid P.V.C. conduit (MMS) of ISI marked suitable size etc. as required as per specification2X1.5 sqmm + 1x1.5 sqmm earth wire |
| 62 | 2X2.5 sqmm + 1x 2.5 sqmm earth wire |
| 63 | 2X4.0 sqmm + 1x 4.0 sqmm earth wire |
| 64 | 2X6.0 sqmm + 1x 6.0 sqmm earth wire |
| 65 | Supplying and fixing PVC conduit as required confirming to IS 9537 (Part-3), ISI marked along with accessories on surface etc. as required32MM |
| 66 | Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board |
| 67 | Supply and fixing as per specification Switch of approved make ISI marked with necessary material complete.Blank plate 1 module |
| 68 | Supplying and fixing factory fabricated hot dip galvanized switch box for normal flush type accessories of minimum 1.2 mm thickness for up to 200mmx250mm size boxes and 1.6mm minimum thickness for higher size boxes, earth terminal stud with nut and washer, including 3 mm thick synthetic phenolic resin bonded laminated sheet conforming to grade P-I of IS:2036-1974 on surface/concealed including all necessary accessories, painting etc. as required as per specification. MS box 300 X 380 |
| 69 | Supplying and fixing of approved make modular type G.I. metal box 1.2mm minimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plate including fixing in concealed etc. as required for:- G.I box 12 module |
| 70 | Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/2019 with upto date amendments.1200 mm sweep Ornamental fan |
| 71 | Numbering of ceiling fans or fitting with approved paint including all labour material etc. as required.Letter above 7 CM but upto 15 CM height |
| 72 | Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required. |
| 73 | Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes. |
| 74 | Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 V on surface /recess complete with , tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). |
| 75 | Inverter with two battery approved make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender