Tender For Road Safety Works Including Providing Crash Barrier On Ghat Section, Interlocking Blocks, Retaining Wall And Road Side Drainage On Vulnerable Location Between Ch-5/400 To 80/00, Junction Improvement Barekhan Fanta On Nh-56 Ch. 27/500, Km 44/500
Tender Value
8.12 Crore
Estimated cost
Bid Submission
26 Oct 2026
25 days left
EMD
16.24 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Banswara → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Road Safety Works Including Providing Crash Barrier On Ghat Section, Interlocking Blocks, Retaining Wall And Road Side Drainage On Vulnerable Location Between Ch-5/400 To 80/00, Junction Improvement Barekhan Fanta On Nh-56 Ch. 27/500, Km 44/500 (Dholapani) And Slope Stabilisation Work Between 84/0 To 85/0 On Nh-56 At Chatriyakhedi
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material up to a lead of 1000m including removal and disposal of top organic soil not exceeding in 150 mm thickness as per MoRTH specification clause 201.by mechanical means in light jungle |
| 2 | Construction of sub grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to require slope and compacted by vibratory roller 8-10 Tonne to meet requirement of Table 300-2 as per MoRTH specification Clause No. 305. |
| 3 | Milling of distress bitumenous layer upto 70mm depth in a single pass with suitable milling machine (capable of milling @ 200&300 sqm of area per hr) fitted with loading conveyer of loading the filled material directly on the trucks i/c hauling and stock pilling the reclaiming to bring to required specification to reuse with the approval of engineer - in - charge for safe disposal; with all leads and lifts complete in all respect as directly by Engineer - in- charge.*Note : The unutilized quality of reclaimed bituminous mix material shall be recovered. |
| 4 | Earth work in excavation in foundation trenches etc. .in drains and channels etc. not exceeding 2m.depth, including dressing of bottom and sides of trenches, stacking the excavated soil 3m Clear from the edge of excavation including disposal of surplus soil as directed within a lead of 1000 meters [MoRTH Specification :Clause 301,304] In ordinary Soil |
| 5 | Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400- 1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means with all For Grading IV Material item no 4.3.4 |
| 6 | Providing, laying, spreading and compacting stone aggregate for Wet Mix Macadam (as per table 400-12 and 400-13) specification including premixing the material with water to OMC in wet mix plant as per approved design mix, carriage of mixed material by Tipper to site, laying in uniform layers with motor grader/Front end Loader/paver finisher, in sub base/ base course on a well prepared under base and compacting with vibratory roller to achieve the desired density including lighting, guarding, barricading and maintenance of diversion etc. (MoRTH specification : Clause 406 & Clause 112) by mechanical means with all lead . |
| 7 | Providing and applying Primer coat over prepared surface or granular base with bitumen emulsion SS-1 as per IS: 8887 & manufacturer’s specifications @ 6 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 502 & 112 (Including cleaning of road surface). |
| 8 | Providing and applying tack coat on the prepared surface, with bitumen emulsion RS-1 as per IS: 8887 & manufacturer’s specifications @ 2 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 503 & 112 (Including cleaning of bituminous road Surface). |
| 9 | Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 500-8 &500-10 and design mix for base/binder course including loading of material with Front end loader, heating of binder(including cost of anti-stripping compound wherever required) aggregate and filler as per table 500-9, In hotmix plant More than 60-90 TPH, transporting the mixed material by tippers and laying with sensor paver finisher as per clause 505.3.5 to the required level and grade rolling by self propelled power roller sand vibratory rollers or pneumatic tyred roller 150-250KN.TP 0.7MPa to achieve the desired density(approved by the department) but excluding cost of primer/tack coat. [MoRTHSpecification : Clause 505 & 112] with all leads Grading II (26.5mmnominal size) -Bitumen@minimum 4.5% of mix using VG 30 ( thickness 50 - 75 mm ) |
| 10 | Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-16 & 500-17 for wearing course including loading of aggregate with front end loader and hot mixing of binder (including cost of anti-stripping compound wherever required) and filler as per table 500-9 with aggregates in hot mix plant more than 60–90 TPH, transporting the mix material with tipper and laying with sensor paver finisher (as per clause 507.3.5) to the required level, grades and rolling with vibratory compactor and pneumatic tyred roller 150–250 kN, TP = 0.7 MPa to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MoRTH Specification Clause 507 & 112) with all lead.Grading II (13.20 mm nominal size) – Bitumen @ minimum 5.40% of mix, Thickness 30–40 mm, VG-40 Grade |
| 11 | Providing and laying marking of center line and stop line etc with hot thermoplastic compound of approved quality with type-1 glass beeds (Table-800-9) , 2.5 mm thick on road/ plain surface, including reflectorising glass beads type-2 (Table-800-10) @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 12 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 90 cm equilateral triangle |
| 13 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing,60 cm circular shape |
| 14 | Supplying and fixing of Cat’s Eye made of aluminum alloy size 75x100x22 mm having 21 biconvex lenses embedded in circular disc of ABS plastic on each side. |
| 15 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on CRC rolled channel vertical post, 150 x 75 x 5 mm spaced 2 mm centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and IS: 1364 , metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MoRTH specification Clause 811.3. |
| 16 | Providing & fixing letters/ borders from reflective tape ofapproved quality of standard width (MORTH SpecificationClause 800) P & F Borders (50mm wide |
| 17 | Supply of Chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on M.S. angle iron post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8 M dia, plate is covered by high intensity grade yellow retro-reflective sheeting and black screen printed arrow on Retro Reflective Sheet, complete in all respect. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom |
| 18 | Supplying and fixing of Direction and place identification sign board made out of 2 mm thick M.S. sheet framed to angle iron 40x40x5 mm and two vertical posts of angle iron of size 65x65x6 mm 3 meter long with hold fasts, stove enameled paint reflective letter symbol Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom Size 1500x1200 mm |
| 19 | Supply & fixing of Hazard Marker made out of 2 mm thick M.S. sheet size 300x300x3 mm framed with angle iron 25x25x3 mm and fixed on channel posts 75x40x6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos., 5 cm dia reflective sheet on white reflective background with additional border of 1.25 cm all around it. |
| 20 | Supply or Retro-reflective Name Board size 600x900 made out of 2mm thick aluminum sheet fixed on post and frame made out or angle iron 50x50x6mm, 3M long using stainless steel nut bolts of 8 mm dia, aluminum sheet is covered with high intensity grade Retro-reflective sheeting and non reflective letters in black, post duly painted in black and white synthetic enamel, complete in all respect. Confirming to MoRTH specifications (2013) c1. 801.- Do- size 900x1500 mm |
| 21 | Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc. .including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 meters, as per drawing and technical specification.in hard soil [MoRTH Specification : Clause : 301] ITEM NO. 12.1.2.2 above 3 to 6m depth |
| 22 | Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc. .including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 meters, as per drawing and technical specification.in ordinary/soft rock [MoRTH Specification : Clause : 301] ITEM NO. 12.1.3.2 .if blasting is not resorted to |
| 23 | Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification. [MoRTH Specification : Section 1700(N)&1500(N)]. Using Batching Plant, Transit Mixture, and Concrete Pump.P.C.C.M-15 grade ITEM NO 12.7.1 |
| 24 | Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification. [MoRTH Specification : Section 1700(N)&1500(N)]. Using Batching Plant, Transit Mixture, and Concrete Pump.R.C.C.M-25 grade |
| 25 | Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification. [MoRTH Specification : Section 1700(N)&1500(N)]. Using Batching Plant, Transit Mixture, and Concrete Pump.P.C.C.M-25 grade |
| 26 | providing and laying steel reinforcement at any level in foundation on drawing and techhnical Speciification : Clause 1207 (N) NH BSR Udaipur_2024 ITEM NO. 12.12.1.HYSD Bar Reinforcement |
| 27 | Providing A.C pipe Weep holes 150mm dia in Masonry/Plain Concrete/.Reinforced Concrete abutment, wing wall/return wall complete as per drawing and technical specification.[MoRTH Specification Clause 2205] |
| 28 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces new surface |
| 29 | Back filling behind abutment, wing wall and return wall, in 150mm layers, with mechanical compaction, complete with all lead and lift, as per drawing and technical specification. [MoRTH Specification : Clause : 304] Gravelly material ITEM NO 12.3.1. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender