Tender For Minor Repair Works At Haddo Wharf Berth No. 3 At Sri Vijaya Puram
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Oct 2026
0 days left
EMD
3.15 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Minor Repair Works At Haddo Wharf Berth No. 3 At Sri Vijaya Puram
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Cutting and removing RCC/rich mix by using pavement breaker and air compressor , including the cost of hire charges of pavement breaker and air compressor, all labour charges charges for breaking stacking of unserviceable and servieable materials , gas, cutter, minor tools including GST & LWC etc., complete. |
| 2 | Providing and laying PCC M20 (1:1.5:3 - one cement, one and half mainland river sand & three stone chips) using 20 mm. graded stone chips , Mainland River Sand, Cement, approved plasticizer, silica fume for cast-in-situ concrete items for wearing coat etc. including cost of nominal shuttering, cement, silica fume, plasticizer, cost of stone chips, mainland river sand, all labour charges for mixing, conveying, placing, consolidation, screening and washing of stones chips and sand, transportation charges of all materials to Work Site and running charges of batching plant, vibrator, consumables and all other equipments required for this work , cost of minor tools and plant, GST,LWC etc. complete. |
| 3 | Providing and fixing Tor steel reinforcement (TMT BARS FE500) for R.C.C. works including cost of steel, cutting of steel, bending, binding and placing in position, cost of binding wire, cost of transportation charges of all materials to worksite, all labour charges, cost of minor tools, LWC & GST etc., complete. |
| 4 | Conveying the dismantled concrete/debris by truck and dumping within a lead of 14km as directed by the EIC, including cost of all materials, hire charges of truck including POL and operator, minor tools, LWC & GST etc., complete. |
| 5 | Scaffolding : Providing and fixing double scaffolding system (cup lock type ) on the exterior side, up to seven storey height made with 40mm dia M.s tube 1.5 m center to centre with M.S tube , M.S Challies , M.S Clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings runners, connection with the building etc. wherever required for inspection roof work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer -in-charge . The plan/elevation area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding including cost of all materials, all labour charges, transportation charges minor tools, LWC & GST etc., complete. |
| 6 | Surface preparation to receive micro concrete by chipping to depth of max.75mm, cleaning, removing the traces of dust, loose concrete etc.including cost of all labour charges, minor tools, labour cess, GST etc.complete. |
| 7 | Replacement of reinforcement as additional bars including bending, cutting, welding and fixing, including cost of steel, transportation charges, all labour charges, minor tools, labour cess, GST etc.complete. |
| 8 | Steel centering and shuttering including strutting proping etc.and removal of form for :Columns, Pillars, Pipes, Abutments, Posts and struts, including cost of all materials, all labour charges, minor tools, labour cess, GST etc.complete. |
| 9 | Drilling holes in the existing structure with mechanized boring machine to an average dia of 100mm at required location for pouring the micro concrete including cost of all labour charges and machineries , minor tools & Plants,LWC & GST etc., complete. |
| 10 | Supply and apply of high strength, non shrink cementilous free flow micro concrete (With minimum 28 days flexural strength 50 Kg/ Sqcm and compressive strength 500 Kg/Sqcm. As per BS 4551-80) for above water level using 12mm down size graded stone chips with the ratio of 1:0.75 (1 high strength & non shrink cementitious micro concrete chemical 0.75 12mm to 6mm stone chips) on site to enable completion of pouring in a continous operation. An approved grout concrete mixer of slow speed heavy duty drill and exact quality of water as recommended should be poured into the mixing vessel with cleaned stone chips of size 12mm to 6 mm slowly and mix the same thoroughly in a forced action. The mixed material should be placed immediately to positioned formwork continously to an average thickness of 75mm without any gap.including cost of all materials, labour charges, minor tools, labour cess, GST etc.complete. |
| 11 | Supply and application of Epoxy Conctete Bonding agent (Confirming to and having BS 6319 certification) cleaned and properly prepared old concrete surface to give good bonding between old and new concrete, including cost of all materials, labour charges, minor tools, labour cess, GST etc.complete. |
| 12 | Supplying, mixing and applying CURING MEMBRANE or equivalent with water including cost of materials, labour charges, minor tools, labour cess, GST etc.complete. |
| 13 | Protective Coat : Supplying and applying two coats of IPH - Conguard or DECKGUARD 'S' or equivalent by spray or brush over the prepared surface and allow it to dry including cost of materials, labour, brushes, tools, equipments labour cess, GST etc. complete. The polymer material properties are to be as follows: |
| 14 | Lockset: Mark the holes required spot Drill the pilot holes using 14 mm dia hammer drill bit to a depth of 150 mm .clean the holes with good water mix the base and hardner of polyester resin LOKSET \\"S\\" or equivalent pour the same to the 2/3 of the depth and insert the shear connecting rod of 12 mm dia gently in to the prepared holes .pack the gap if any allow it to set for mn 20 minutes without distrubing including cost of all materials all labour charges,labour cess,GST etc., complete. |
| 15 | Providing and fixing the sacrificial anode (Fosroc Galvashield XP or equivalent) over the main reinforcement of pile, pile caps, columns, Deck Beams and Deck Slabs etc. as per the manufacturer specification and designed spacings, as sacrificial anode to the reinforcement against corrosion, Including cost of all materials, machineries and labour charges, minor tools, labour cess, GST etc., Complete. |
| 16 | Anticorrosive coat on bars : Supplying , preparing and priming the reinforcement steel with Epoxy Zinc primer or Epoxy Zinc Primer or epoxy anti corrosive paint ( Confirming to IS/BS certification ), including cost of all materials all about charges, minor tools , LWC & GST etc., complete. |
| 17 | Supply of Motor Launches as & required for transporation of department staff for supervision including hire charges of engine dinghy with fuel & operator, minor tools & plants, LWC & GST etc., complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender