Tender For Hard Shulder And Interlocking Block Pavement Work From Kherwara Side Pkg4 End Point To Do Nadi Pool & Do Nadi Pool To Dungarpur And Tijwad To Nh927A Pkg4 Merging Point At Km 168/600 To 170/600
Tender Value
6.37 Crore
Estimated cost
Bid Submission
26 Oct 2026
11 days left
EMD
12.74 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Banswara → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Hard Shulder And Interlocking Block Pavement Work From Kherwara Side Pkg4 End Point To Do Nadi Pool & Do Nadi Pool To Dungarpur And Tijwad To Nh927A Pkg4 Merging Point At Km 168/600 To 170/600
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Oct-2026 | SBD | Technical Bid | 26-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Milling of distress bitumenous layer upto 70mm depth in a single pass with suitable milling machine (capable of milling @ 200&300 sqm of area per hr) fitted with loading conveyer of loading the filled material directly on the trucks i/c hauling and stock pilling the reclaiming to bring to required specification to reuse with the approval of engineer - in - charge for safe disposal; with all leads and lifts complete in all respect as directly by Engineer - in- charge.*Note : The unutilized quality of reclaimed bituminous mix material shall be recovered. |
| 2 | Earth work in excavation in foundation trenches etc. .in drains and channels etc. not exceeding 2m.depth, including dressing of bottom and sides of trenches, stacking the excavated soil 3m Clear from the edge of excavation including disposal of surplus soil as directed within a lead of 1000 meters [MoRTH Specification :Clause 301,304] In ordinary Soil |
| 3 | Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400- 1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means with all For Grading IV Material item no 4.3.4 |
| 4 | Providing, laying, spreading and compacting stone aggregate for Wet Mix Macadam (as per table 400-12 and 400-13) specification including premixing the material with water to OMC in wet mix plant as per approved design mix, carriage of mixed material by Tipper to site, laying in uniform layers with motor grader/Front end Loader/paver finisher, in sub base/ base course on a well prepared under base and compacting with vibratory roller to achieve the desired density including lighting, guarding, barricading and maintenance of diversion etc. (MoRTH specification : Clause 406 & Clause 112) by mechanical means with all lead . |
| 5 | Providing and applying Primer coat over prepared surface or granular base with bitumen emulsion SS-1 as per IS: 8887 & manufacturer’s specifications @ 6 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 502 & 112 (Including cleaning of road surface). |
| 6 | Providing and applying tack coat on the prepared surface, with bitumen emulsion RS-1 as per IS: 8887 & manufacturer’s specifications @ 2 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 503 & 112 (Including cleaning of bituminous road Surface). |
| 7 | Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 500-8 & 500-9 and design mix for base/binder course including loading of aggregate with front end loader, heating of binder (including cost of anti-stripping compound wherever required), aggregates and filler as per table 500-9 in hot mix plant more than 60–90 TPH, transporting the mixed material by tippers and laying with sensor paver finisher as per clause 505.3.5 to the required level and grade, rolling by self propelled power rollers and vibratory rollers or pneumatic tyred roller 50 kN–TP = 0.7 MPa to achieve the desired density (approved by the department) but excluding cost of primer/tack coat. (MoRTH specification Clause 505 & 112) with all leads.Grading II (26.5 mm nominal size) – Bitumen @ minimum 4.5% of mix VG-40 (Thickness 50–75 mm), |
| 8 | Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-16 & 500-17 for wearing course including loading of aggregate with front end loader and hot mixing of binder (including cost of anti-stripping compound wherever required) and filler as per table 500-9 with aggregates in hot mix plant more than 60–90 TPH, transporting the mix material with tipper and laying with sensor paver finisher (as per clause 507.3.5) to the required level, grades and rolling with vibratory compactor and pneumatic tyred roller 150–250 kN, TP = 0.7 MPa to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MoRTH Specification Clause 507 & 112) with all lead.Grading II (13.20 mm nominal size) – Bitumen @ minimum 5.40% of mix, Thickness 30–40 mm, VG-40 Grade |
| 9 | Supply of Chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on M.S. angle iron post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8 M dia, plate is covered by high intensity grade yellow retro-reflective sheeting and black screen printed arrow on Retro Reflective Sheet, complete in all respect. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & holdfast at bottom |
| 10 | Raised Payment Marker (Cats Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS Moulded body and Polycarbonate Reflective panels with Micro Prismatic Lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35000 Kilogram tested in accordance to ASIM D 4280 & ASTM D 788. The Height of Road Stud is 20mm, Width 100mm, Length 100mm and minimum reflective area of 13 sqcm on each side.The Strength of detachment of the integrated cylender shank not less than 14+/-2mm (Thickness) and height not less than 30+ 2mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive |
| 11 | Providing and laying marking of center line and stop line etc with hot thermoplastic compound of approved quality with type-1 glass beeds (Table-800-9) , 2.5 mm thick on road/ plain surface, including reflectorising glass beads type-2 (Table-800-10) @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding andmaintenance of diversion. |
| 12 | Mandatory/ Regulatory retro reflective sign boards 60 cm Dia made out of 2.0 mm thick aluminum sheet riveted on a frame of 40X40X3mm angle Iron, face to be fully covered by white/ blue high intensity grade retro reflective sheeting with Red/white symbol, cut out or screen printed back ground with epoxy paint, confirming to MoRTH specifications. (2013) CI. 801 with angle iron post 65x65x6 mm 3 M.long. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & holdfast at bottom |
| 13 | Supplying cautionary / warning sign board 90 cm equilateral triangle made out of 2.0 mm thick aluminum sheet riveted on a frame of 40X40X3mm angle Iron, face to be fully covered by white / blue high intensity grade retro reflective sheeting with Red/white symbol, cut out or screen printed background with epoxy paint complete confirming to MoRTH specifications (2013) Cl. 801 with angle iron post 65 x 65 x 6 mm. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom |
| 14 | Supply of Hazard Marker made out of 2 mm thick M.S. sheet size 300x300x3 mm framed with angle iron 25x25x3 mm and fixed on channel posts 75x40x6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos., 5 cm dia reflective sheet on white reflective background with additional border of 1.25 cm all around it. |
| 15 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces old surface |
| 16 | Providing and laying reinforced cement concrete pipes N.P.4 for culverts including jointing ends and fixing collar with cement mortar 1:2 [MoRTH Specification : Clause :1000/2900] |
| 17 | Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for 'AA' class loading as per IRC specifications including to effect of impact, EQ etc. complete on form base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal size the work includes required safety measures construction of drain for diversion of flowing water cost of design of RCC Precast Box and its proof checking from IIT/MNIT Jaipur complete in all respect as per specifications |
| 18 | Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc. .including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 meters, as per drawing and technical specification.[MoRTH Specification : Clause : 304] IN ORDINARY SOIL DEPTH UPTO 3m ITEM NO. 12.1.1.1 |
| 19 | Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification. [MoRTH Specification : Section 1700(N)&1500(N)]. Using Batching Plant, Transit Mixture, and Concrete Pump. P.C.C M15 GRADE NH BSR Udaipur_2024 ITEM NO. 12.7.1 |
| 20 | Reinforced cement concrete M25 mix with stone aggregate 20 mm nominal size mechnically mixed and vibrated for reinforced concrete work in superstructure at any level excluding steel reinforcement but including centering and shutttering laid in position (MoRTH specification : Clause 1000/1700) R.C.C. M-25 GRADE NH BSR Udaipur_2024 ITEM NO. 12.7.6 |
| 21 | providing and laying steel reinforcement at any level in foundation on drawing and techhnical Speciification : Clause 1207 (N) HYSD BAR REINFORCEMENT NH BSR Udaipur_2024 ITEM NO. 12.12.1 |
| 22 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, coarse aggregate 26.5mm nominal size aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. as per MoRTH Specification cl.601. |
| 23 | Providing and fixing of Precast concrete interlocking blocks of 60mm thick manufactured from fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class as per IS: 15658-2006. The C.C. interlocking paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub base as defined. The work includes earth work in cutting of B/T road, cutting of WBM road and disposal of unserviceable material with all leads & lifts and stacking of serviceable material complete job is to be executed as per the instructions of Engineer-in-charge. The rates to be inclusive of all lead, lifts & taxes General specification of Blocks:Shape : As specified by Engineer-in-charge,Tensile splitting strength and breaking load as per BS:6717-2001,Colour : Grey cement natural colour,Variation in Dimension : Less than 1.6mm,Variation in thickness : Less than 3.2mm, 100mm thick, Heavy traffic category, M50 Grade designation blocks BSR Item no 8.60.4 |
| 24 | Earth work in excavation in foundation trenches etc. .in drains and channels etc. not exceeding 2m.depth, including dressing of bottom and sides of trenches, stacking the excavated soil 3m Clear from the edge of excavation including disposal of surplus soil as directed within a lead of 1000 meters [MoRTH Specification :Clause 301,304] In ordinary Soil |
| 25 | Providing and laying mechanically mixed and vibrated Cement Concrete in foundation up to a depth of 1.5 meters below ground level and 1.50 meters above Ground/Bed level.[MoRTH Specification : Clause 1000/1700] Cement concrete 1:3:6 mix crushed stone aggregates40mm nominal size. |
| 26 | Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification. [MoRTH Specification : Section 1700(N)&1500(N)]. Using Batching Plant, Transit Mixture, and Concrete Pump.P.C.C.M-25 grade Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 11 daysOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender