Tender For Annual Plan-2026-27, Keralassery Kallappadi N.E.U.P School Kalloor Road Maintenance Ward 6 In Keralassery Gp-(Pro.No.193/27)-General Civil Work
Tender Value
12.70 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
4 days left
EMD
31756
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palakkad → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Plan-2026-27, Keralassery Kallappadi N.E.U.P School Kalloor Road Maintenance Ward 6 In Keralassery Gp-(Pro.No.193/27)-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Road maintenance |
| 2 | 3.2:Preparation of Foundation for Embankment <br> Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means <br> Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4. |
| 3 | 4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material |
| 4 | OD194763/2026-2027:(Modified DSR code 16.91.2) Providing and laying 100mm thick factory made cement concrete interlocking paver block of M-40 grade with approved colour, design and pattern. Cement concrete paver blocks in footpaths, parks,lawn,drive ways or light traffic parking etc. of required strength thickness and shape made by table vibratory method using PU mould laid in required colour and pattern over 50mm thick compacted bed of 6mm aggregate compacting and proper embedding layer of interlocking paver blocks into the aggregate bedding layer through vibratory compaction using plate vibrator filling the joints and cutting of paver blocks etc as per required size and pattern, finishing and sweeping complete as per direction of Engineer in charge. |
| 5 | 75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification(i) Nominal mix (1:2:4) |
| 6 | OD194762/2026-2027:Filling with Quarry Muck Filling up low lying and water logged areas with local material/quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade. |
| 7 | OD195112/2026-2027:Filling up pot holes (cut and formed to regular shapes and all loose and defective materialsremoved) after supplying a prime coat of hot bitumen using 36mm broken stone andcompacting with power roller to get a compact surface.to get a compact surface. |
| 8 | 75.5.2.2pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 9 | 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates <br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 <br> By Manual Means <br> Type A <br> (II) Bitumen (S-65) |
| 10 | OD194769/2026-2027:Name Board (MORD): Supplying and providing readymade GI name board with all conveyance, labour and hire charges etc. complete using GI hollow tube of size 80x40x1.4mm outer frame, 0.6mm thick iron sheet of size 90x60cm with two coat of enamel painting over a coat of primer, lettering with suitable colour and size, fixing the post in ground with C.C 1:2:4 etc complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender