Defence Statutory Bodies & Commissions/Committees Closing in 8 days TDR #57731202

Bids Are invited for Comn Trench

Issued by Statutory Bodies & Commissions/Committees · Baramulla, Jammu and Kashmir
Tender Value
3.17 Crore
Estimated cost
Bid Submission
07 Oct 2026
8 days left
EMD
15.87 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
88764

Project Description

Bids Are invited for Construction Of Comn Trench With Cgi Sheet Size 810 Mm X 2440 Mm - Construction Of Comn Trench With Cgi Sheet Size 810 Mm X 2440 Mm For Revetment With Rh Steel Section Of Size 76.2 Mm X 38 Mm X 3.65 Mm 2.70M Long 5.86Kg With Ms Base Plate Size 250 X 250 X 8 Mm 62.80 Kg As Cross Bracing For Supporting To Cgi Sheet And At Top A Horizontal Ismc Size 75X40 1.07 Long , Cgi Sheet 810Mm X 2440 Mm Long 0.63Mm Thick With Galvanized Of 375 Gsm - Cgi Sheet 810Mm X 2440 Mm Long 0.63Mm Thick With Galvanized Of 375 Gsm Complete With Set Of 14 Nos Ms Hexagonal Nuts Bolts And Bitumen & Steel Washers 12 Mm Dia 40Mm Long , Steel Roofing Trough Size 1500X613x180mm Made Out Of 2Mm Thick Hot Rolled Carbon Steel , Rh Steel Section Of Size 76.2 Mm X 38 Mm X 3.65Mm 2.70M Long 5.86Kg With Ms Base Plate Of Size 250 X 250 X 8 Mm Duly Welded To Pipe And Including Making Necessary Jointing Points , Ismc 75X40mm 1.07 Long Fixed At Top Horizontally 7.14Kg - Ismc 75X40mm 1.07 Long Fixed At Top Horizontally 7.14Kg Including Making Necessary Jointing Points Assembled Points As Directed By Buyer With 02 Nos Iron Flat Of Six 50X5mm 100Mm Long For Each Ismc Fixed/Welding With Fixed/Welding And Including Applying Two Coats Of Synthetic Enamel Paint Og Over A Coat Of Red Oxide Primer Painting Etc , Sh Steel Section Of Size 38 Mm X 38 Mm X 3.25Mm, 2.25M Long 3.33Kg - Sh Steel Section Of Size 38 Mm X 38 Mm X 3.25Mm2.25M Long 3.33Kg And Including Applying Two Coats Of Synthetic Enamel Paint Og Over A Coat Of Red Oxide Primer Painting Etc , Sh Steel Section Of Size 38 Mm X 38 Mm X 3.25Mm 1.12M Long - Sh Steel Section Of Size 38 Mm X 38 Mm X 3.25Mm 1.12M Long As Cross Bracing For Supporting Cgi Sheets Including Making Necessary Jointing Points Assembled Points As Directed By Buyer With Fixed And Including Applying Two Coats Of Synthetic Enamel Paint Og Over A Coat Of Red Oxide Primer Painting Etc , Hdpe Sheet Having Weight 100 Gsm , Hdpe Sand Bag Of Size 75 X 40 Cm In Sand Colour And Each Bag Having Weight Not Less Than 60 Gms Complete , Self Tapping Screw 100Mm , 8Mm Dia 75Mm Long J Hooks , M S Nut And Bolt 12 Mm Dia 80 Mm Long 0.142Kg Each Including 3Mm Thick Wahers 02 Nos Per Bolts , M S Nut And Bolt 12 Mm Dia 40 Mm Long 0.142Kg Each Including 3Mm Thick Wahers 02 Nos Per Bolts , Manufactured Sand Coarse And Fine Aggregates - Manufactured Sand Coarse And Fine Aggregates Free From Adherent Coating Hard Durable Clean And Shall Not Contain Clay And Impurities Such Iron Pyrites Alkalies Salt Coal Mica Shale Or Similar Laminates Or Other Materials Exceeding The Specified Limits In Is Code Aggregates For Concrete , Aggregate 20Mm Stone Aggregate To Be Crushed Rock Or Gravel 20Mm Graded And Shall Consist Of Angular Fragments And Shall Be Clean Hard Tough Durable And Of Uniform Quality Through Out The Supply Qty , Aggregate 40Mm To Be Crushed Rock Or Gravel 40Mm Graded And Shall Consist Of Angular Fragments And Shall Be Clean Hard Tough Durable And Of Uniform Quality Through Out The Supply Qty , Rapidite Quick Setting Liquid Make Acclerex Cico Fosroc , Form Work 10Mm Thick Ply Wood Of Size 2.00X0.20M , Precast Concrete Saucer Drain Of Size 300Mm X 600Mm X 75Mm Thickness Compresive Strength M30 , Supply And Delivery Of Wire Free Led Light 2Watt Luminaires Equipped With Integrated Passive Infrared Motion Sensors And Ambient Light Photocells For Automated Indoor Auxiliary Illumination , Supply And Delivery Of High Performance Heavy Duty Aaa Lr03 Alkaline Dry Cell Primary Batteries Designed For Low To Medium Drain Continuous And Pulse Discharge Electronic Equipment , One Complete Portable Hydraulic Drilling Unit - One Complete Portable Hydraulic Drilling Unit With Built In Compressor And Portable Hydraulic Power Pack Powered By A 14 Hp 4 Stroke Engine With Built In Air Compressor Flushing System To Eliminate The Need For External Air Or Water When Clearing Dust Cutting Four Selectable Blow Frequency And Rotation Modes Anti Vibration Handles And Hex Shank Chuck Holder Compete With Heavy Duty Supply Return Hydraulic Hose Lines Quick Release Couplings , Brick Trowel Steel Of Professional Grade With A Blade Length Of 305 Mm Precision Forged From A Single Piece Of High Carbon Steel, With High Quality Seasoned Wooden Handle , Brick Hammer With Handle Of Nominal Weight 1.2 Kg - Brick Hammer With Handle Of Nominal Weight 1.2 Kg Made Of High Carbon Steel Fully Killed Heat Treated And Hardened For Durability The Hammer Shall Feature One Square Striking Face And One Flat Chisel Shaped End For Clean Breaking And Dressing Of Bricks , Aluminimum Straight Edge For Floor Plastering 50Mm Square 2Mm Thick And1800mm Long Made Of High Grade Extruded Aluminium Alloy , Plaster Trowel Made Of High Carbon Spring Steel Of Min Thickness 0.7Mm The Blade Shall Be Securely Att To A Hvy Duty Aluminium Alloy Mounting , Galvanised Iron Pan Mortar Tasla Pressed From 16 Gauge Ms Sheet Having 400Mm Dia And Depth Of 150Mm Minimum Weight Of 1.5 Kg , Fish Line Made Of Nylon With A Min Dia Of 1.5Mm - Fish Line Made Of Nylon With A Min Dia Of 1.5Mm Having High Tensile Str And High Visibility Colour The Line Must Be Stretched Taut Between Established Colns To Ensure The Horizontal Alignment And Uniform Course Height Of Masonry , Plumb Bob Made Of Hardened Steel Iron Weighing Min 400Gms With A Corrosion Resistant Finish And A Replacable Hardened Steel Tip Connected With High Strength Braided Nylon Line For Durability , Rammer Made Of Heavy Duty Cast Iron Ms - Rammer Made Of Heavy Duty Cast Iron Ms The Base Plate Area Of Approx 150 X 150 Mm Is Provided A 6 Ft Long Hard Wooden Handle Is Provided For Proper Gripping Of The Ramming Tool Minimum Weight Of 5 Kg Without Handle Is Permissible , Picks Axes With Chiesel And Pointed Ends Nominal Weight 3.0 Kg Overall Length 595 Mm With Hard Wooden Handle , Showel Square Nose 14 Gauge Tata High Carbon Steel Blade Size 310 X 245 Mm Shaft Size 710 Mm Fitted With Strong Steel Crutched Hard Wooden Handles , Fawada Of Size 150 X 275Mm Made Of High Tempered Iron Mild Steel With A Min Thickness Of 1.5Mm And Securely Fitted With A Straight Grained Hardwood Handle For Proper Grip And Min Wt Of 2 Kgs , Painting Brush Flat Of 100Mm Width With Pure Natural Bristles Or High Quality Synthetic Filaments - Painting Brush Flat Of 100Mm Width With Pure Natural Bristles Or High Quality Synthetic Filaments, Securely Fixed With Corrosion Resistant Ferrule The Brush Shall Have A Balanced Ergonomically Shaped Hardwood Or High Impact Plastic Handle , Multipurpose Non Slip Reusable Gloves Made Of Premium Grade Natural Latex Or Synthetic Nitrile Rubber - Multipurpose Non Slip Reusable Gloves Made Of Premium Grade Natural Latex Or Synthetic Nitrile Rubber Should Have Honeycomb Textured Palms And Fingertips For Superior Non Slip Performance Soft Flock Interior Lining For Moisture Absorbtion Comfort And Ease Of Working Colour Olive Green , Aluminium Spirit Level 12 Inch Must Be Rust Proof And Should Have An Extruded Aluminium Profile , Water Leveling Tube Should Be Made Of Heavy Duty Crystal Clear Flexible Pvc - Water Leveling Tube Should Be Made Of Heavy Duty, Crystal Clear Flexible Pvc It Should Have A Min Internal Dia Of 8Mm And Wall Thickness Of 1.5Mm The Tube Shall Be Free From Defects Kinks Opacity Ensuring Clear Visibility Of Water It Should Have A Length Of 50 Mtr , Cutting Pliers Of Length 210 Mm With High Grade Steel And Serrated Jaws And Insulated Handles , Measuring Tape Should Be Heavy Duty And A Retractable Type Of Length 15M Made Of Steel - Measuring Tape Should Be Heavy Duty And A Retractable Type Of Length 15M Made Of Steel It Should Be Nabc Credited And Nylon Coated With Abrasion Resistance Housed In An Impact Resistant Abs Rubber Overmould Case , Fire Extinguisher 2 Kgs Capacity Abc Map 90 Along With Its Accessories

BOQ

Sl. No. Item TitleItem Description
1Construction of Comn Trench with CGI Sheet size 810 mm x 2440 mmConstruction of Comn Trench with CGI Sheet size 810 mm x 2440 mm for revetment with RH steel section of size 76.2 mm x 38 mm x 3.65 mm 2.70m long 5.86Kg with MS base plate size 250 x 250 x 8 mm 62.80 Kg as cross bracing for supporting to CGI sheet and at top a horizontal ISMC size 75x40 1.07 long
2CGI sheet 810mm X 2440 mm long 0.63mm thick with galvanized of 375 GSMCGI sheet 810mm X 2440 mm long 0.63mm thick with galvanized of 375 GSM complete with set of 14 Nos MS hexagonal nuts Bolts and bitumen & steel washers 12 mm dia 40mm long
3Steel Roofing Trough Size 1500x613x180mm made out of 2mm thick hot rolled carbon steelSteel Roofing Trough Size 1500x613x180mm made out of 2mm thick hot rolled carbon steel
4RH steel section of size 76.2 mm x 38 mm x 3.65mm 2.70m long 5.86Kg with MS base plate of size 250 x 250 x 8 mm duly welded to pipe and including making necessary jointing pointsRH steel section of size 76.2 mm x 38 mm x 3.65mm 2.70m long 5.86Kg with MS base plate of size 250 x 250 x 8 mm duly welded to pipe and including making necessary jointing points
5ISMC 75X40MM 1.07 long fixed at Top horizontally 7.14KgISMC 75X40MM 1.07 long fixed at Top horizontally 7.14Kg including making necessary jointing points assembled points as directed by buyer with 02 Nos iron flat of six 50x5mm 100mm long for each ISMC fixed/welding with fixed/welding and including applying two coats of synthetic enamel paint OG over a coat of red oxide primer painting etc
6SH steel section of size 38 mm x 38 mm x 3.25mm, 2.25m long 3.33KgSH steel section of size 38 mm x 38 mm x 3.25mm2.25m long 3.33Kg and including applying two coats of synthetic enamel paint OG over a coat of red oxide primer painting etc
7SH steel section of size 38 mm x 38 mm x 3.25mm 1.12m longSH steel section of size 38 mm x 38 mm x 3.25mm 1.12m long as cross bracing for supporting CGI Sheets including making necessary jointing points assembled points as directed by buyer with fixed and including applying two coats of synthetic enamel paint OG over a coat of red oxide primer painting etc
8HDPE sheet having weight 100 gsmHDPE sheet having weight 100 gsm
9HDPE Sand Bag of size 75 x 40 cm in Sand colour and each bag having weight not less than 60 gms completeHDPE Sand Bag of size 75 x 40 cm in Sand colour and each bag having weight not less than 60 gms complete
10Self Tapping screw 100mmSelf Tapping screw 100mm
118mm dia 75mm long J hooks8mm dia 75mm long J hooks
12M S Nut and bolt 12 mm dia 80 mm long 0.142Kg each including 3mm thick wahers 02 Nos per boltsM S Nut and bolt 12 mm dia 80 mm long 0.142Kg each including 3mm thick wahers 02 Nos per bolts
13M S Nut and bolt 12 mm dia 40 mm long 0.142Kg each including 3mm thick wahers 02 Nos per boltsM S Nut and bolt 12 mm dia 40 mm long 0.142Kg each including 3mm thick wahers 02 Nos per bolts
14Manufactured Sand coarse and fine aggregatesManufactured Sand coarse and fine aggregates Free from adherent coating hard durable clean and shall not contain clay and impurities such iron pyrites alkalies salt coal mica shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete
15Aggregate 20mm Stone Aggregate to be crushed rock or gravel 20mm graded and shall consist of angular fragments and shall be clean hard tough durable and of uniform quality through out the supply qtyAggregate 20mm Stone Aggregate to be crushed rock or gravel 20mm graded and shall consist of angular fragments and shall be clean hard tough durable and of uniform quality through out the supply qty
16Aggregate 40mm to be crushed rock or gravel 40mm graded and shall consist of angular fragments and shall be clean hard tough durable and of uniform quality through out the supply qtyAggregate 40mm to be crushed rock or gravel 40mm graded and shall consist of angular fragments and shall be clean hard tough durable and of uniform quality through out the supply qty
17Rapidite quick setting liquid Make Acclerex Cico FosrocRapidite quick setting liquid Make Acclerex Cico Fosroc
18Form work 10mm thick Ply wood of size 2.00x0.20mForm work 10mm thick Ply wood of size 2.00x0.20m
19Precast concrete saucer drain of size 300mm x 600mm x 75mm thickness compresive strength M30Precast concrete saucer drain of size 300mm x 600mm x 75mm thickness compresive strength M30
20Supply and delivery of wire free LED light 2watt luminaires equipped with integrated Passive Infrared motion sensors and ambient light photocells for automated indoor auxiliary illuminationSupply and delivery of wire free LED light 2watt luminaires equipped with integrated Passive Infrared motion sensors and ambient light photocells for automated indoor auxiliary illumination
21Supply and delivery of high performance heavy duty AAA LR03 Alkaline dry cell primary batteries designed for low to medium drain continuous and pulse discharge electronic equipmentSupply and delivery of high performance heavy duty AAA LR03 Alkaline dry cell primary batteries designed for low to medium drain continuous and pulse discharge electronic equipment
22One complete portable Hydraulic drilling unitOne complete portable Hydraulic drilling unit with built in compressor and portable hydraulic Power Pack powered by a 14 HP 4 stroke engine with built in air compressor flushing system to eliminate the need for external air or water when clearing dust cutting four selectable blow frequency and rotation modes anti vibration handles and hex shank chuck holder compete with heavy duty supply return hydraulic hose lines quick release couplings
23Brick Trowel Steel of professional grade with a blade length of 305 mm precision forged from a single piece of high carbon steel, with high quality seasoned wooden handleBrick Trowel Steel of professional grade with a blade length of 305 mm precision forged from a single piece of high carbon steel, with high quality seasoned wooden handle
24Brick Hammer with handle of nominal weight 1.2 KgBrick Hammer with handle of nominal weight 1.2 Kg made of high carbon steel fully killed heat treated and hardened for durability The hammer shall feature one square striking face and one flat chisel shaped end for clean breaking and dressing of bricks
25Aluminimum straight edge for floor plastering 50mm square 2mm thick and1800mm long made of high grade extruded aluminium alloyAluminimum straight edge for floor plastering 50mm square 2mm thick and1800mm long made of high grade extruded aluminium alloy
26Plaster trowel made of high carbon spring steel of min thickness 0.7mm The blade shall be securely att to a hvy duty aluminium alloy mountingPlaster trowel made of high carbon spring steel of min thickness 0.7mm The blade shall be securely att to a hvy duty aluminium alloy mounting
27Galvanised iron pan mortar Tasla pressed from 16 Gauge MS sheet having 400mm dia and depth of 150mm minimum weight of 1.5 KgGalvanised iron pan mortar Tasla pressed from 16 Gauge MS sheet having 400mm dia and depth of 150mm minimum weight of 1.5 Kg
28Fish line made of nylon with a min dia of 1.5mmFish line made of nylon with a min dia of 1.5mm having high tensile str and high visibility colour The line must be stretched taut between established colns to ensure the horizontal alignment and uniform course height of masonry
29Plumb bob made of hardened steel iron weighing min 400gms with a corrosion resistant finish and a replacable hardened steel tip connected with high strength braided nylon line for durabilityPlumb bob made of hardened steel iron weighing min 400gms with a corrosion resistant finish and a replacable hardened steel tip connected with high strength braided nylon line for durability
30Rammer made of heavy duty cast iron MSRammer made of heavy duty cast iron MS The base plate area of approx 150 x 150 mm is provided A 6 ft long hard wooden handle is provided for proper gripping of the ramming tool Minimum weight of 5 Kg without handle is permissible
31Picks axes with chiesel and pointed ends nominal weight 3.0 Kg overall length 595 mm with hard wooden handlePicks axes with chiesel and pointed ends nominal weight 3.0 Kg overall length 595 mm with hard wooden handle
32Showel square nose 14 gauge TATA high carbon steel blade size 310 x 245 mm shaft size 710 mm fitted with strong steel crutched hard wooden handlesShowel square nose 14 gauge TATA high carbon steel blade size 310 x 245 mm shaft size 710 mm fitted with strong steel crutched hard wooden handles
33Fawada of size 150 x 275mm made of high tempered iron mild steel with a min thickness of 1.5mm and securely fitted with a straight grained hardwood handle for proper grip and min wt of 2 kgsFawada of size 150 x 275mm made of high tempered iron mild steel with a min thickness of 1.5mm and securely fitted with a straight grained hardwood handle for proper grip and min wt of 2 kgs
34Painting brush flat of 100mm width with pure natural bristles or high quality synthetic filamentsPainting brush flat of 100mm width with pure natural bristles or high quality synthetic filaments, securely fixed with corrosion resistant ferrule The brush shall have a balanced ergonomically shaped hardwood or high impact plastic handle
35Multipurpose non slip reusable gloves made of premium grade natural latex or synthetic nitrile rubberMultipurpose non slip reusable gloves made of premium grade natural latex or synthetic nitrile rubber should have honeycomb textured palms and fingertips for superior non slip performance soft flock interior lining for moisture absorbtion comfort and ease of working Colour Olive Green
36Aluminium spirit level 12 inch must be rust proof and should have an extruded aluminium profileAluminium spirit level 12 inch must be rust proof and should have an extruded aluminium profile
37Water leveling tube should be made of heavy duty crystal clear flexible PVCWater leveling tube should be made of heavy duty, crystal clear flexible PVC It should have a min internal dia of 8mm and wall thickness of 1.5mm The tube shall be free from defects kinks opacity ensuring clear visibility of water It should have a length of 50 mtr
38Cutting Pliers of length 210 mm with high grade steel and serrated Jaws and insulated handlesCutting Pliers of length 210 mm with high grade steel and serrated Jaws and insulated handles
39Measuring Tape should be heavy duty and a retractable type of length 15m made of steelMeasuring Tape should be heavy duty and a retractable type of length 15m made of steel it should be NABC credited and nylon coated with abrasion resistance housed in an impact resistant ABS rubber overmould case
40Fire extinguisher 2 Kgs capacity ABC MAP 90 along with its accessoriesFire extinguisher 2 Kgs capacity ABC MAP 90 along with its accessories

AI Tender Summary

OUR REF NO 57731202
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 3.17 Crore
LAST DATE 07-10-2026
Authority
Authority Name Indian Army
Work Description Bids Are invited for Construction Of Comn Trench With Cgi Sheet Size 810 Mm X 2440 Mm - Construction Of Comn Trench With Cgi Sheet Size 810 Mm X 2440 Mm For Revetment With Rh Steel Section Of Size 76.2 Mm X 38 Mm X 3.65 Mm 2.70M Long 5.86Kg With Ms Base Plate Size 250 X 250 X 8 Mm 62.80 Kg As Cross Bracing For Supporting To Cgi Sheet And At Top A Horizontal Ismc Size 75X40 1.07 Long , Cgi Sheet 810Mm X 2440 Mm Long 0.63Mm Thick With Galvanized Of 375 Gsm - Cgi Sheet 810Mm X 2440 Mm Long 0.63Mm Thick With Galvanized Of 375 Gsm Complete With Set Of 14 Nos Ms Hexagonal Nuts Bolts And Bitumen & Steel Washers 12 Mm Dia 40Mm Long , Steel Roofing Trough Size 1500X613x180mm Made Out Of 2Mm Thick Hot Rolled Carbon Steel , Rh Steel Section Of Size 76.2 Mm X 38 Mm X 3.65Mm 2.70M Long 5.86Kg With Ms Base Plate Of Size 250 X 250 X 8 Mm Duly Welded To Pipe And Including Making Necessary Jointing Points , Ismc 75X40mm 1.07 Long Fixed At Top Horizontally 7.14Kg - Ismc 75X40mm 1.07 Long Fixed At Top Horizontally 7.14Kg Including Making Necessary Jointing Points Assembled Points As Directed By Buyer With 02 Nos Iron Flat Of Six 50X5mm 100Mm Long For Each Ismc Fixed/Welding With Fixed/Welding And Including Applying Two Coats Of Synthetic Enamel Paint Og Over A Coat Of Red Oxide Primer Painting Etc , Sh Steel Section Of Size 38 Mm X 38 Mm X 3.25Mm, 2.25M Long 3.33Kg - Sh Steel Section Of Size 38 Mm X 38 Mm X 3.25Mm2.25M Long 3.33Kg And Including Applying Two Coats Of Synthetic Enamel Paint Og Over A Coat Of Red Oxide Primer Painting Etc , Sh Steel Section Of Size 38 Mm X 38 Mm X 3.25Mm 1.12M Long - Sh Steel Section Of Size 38 Mm X 38 Mm X 3.25Mm 1.12M Long As Cross Bracing For Supporting Cgi Sheets Including Making Necessary Jointing Points Assembled Points As Directed By Buyer With Fixed And Including Applying Two Coats Of Synthetic Enamel Paint Og Over A Coat Of Red Oxide Primer Painting Etc , Hdpe Sheet Having Weight 100 Gsm , Hdpe Sand Bag Of Size 75 X 40 Cm In Sand Colour And Each Bag Having Weight Not Less Than 60 Gms Complete , Self Tapping Screw 100Mm , 8Mm Dia 75Mm Long J Hooks , M S Nut And Bolt 12 Mm Dia 80 Mm Long 0.142Kg Each Including 3Mm Thick Wahers 02 Nos Per Bolts , M S Nut And Bolt 12 Mm Dia 40 Mm Long 0.142Kg Each Including 3Mm Thick Wahers 02 Nos Per Bolts , Manufactured Sand Coarse And Fine Aggregates - Manufactured Sand Coarse And Fine Aggregates Free From Adherent Coating Hard Durable Clean And Shall Not Contain Clay And Impurities Such Iron Pyrites Alkalies Salt Coal Mica Shale Or Similar Laminates Or Other Materials Exceeding The Specified Limits In Is Code Aggregates For Concrete , Aggregate 20Mm Stone Aggregate To Be Crushed Rock Or Gravel 20Mm Graded And Shall Consist Of Angular Fragments And Shall Be Clean Hard Tough Durable And Of Uniform Quality Through Out The Supply Qty , Aggregate 40Mm To Be Crushed Rock Or Gravel 40Mm Graded And Shall Consist Of Angular Fragments And Shall Be Clean Hard Tough Durable And Of Uniform Quality Through Out The Supply Qty , Rapidite Quick Setting Liquid Make Acclerex Cico Fosroc , Form Work 10Mm Thick Ply Wood Of Size 2.00X0.20M , Precast Concrete Saucer Drain Of Size 300Mm X 600Mm X 75Mm Thickness Compresive Strength M30 , Supply And Delivery Of Wire Free Led Light 2Watt Luminaires Equipped With Integrated Passive Infrared Motion Sensors And Ambient Light Photocells For Automated Indoor Auxiliary Illumination , Supply And Delivery Of High Performance Heavy Duty Aaa Lr03 Alkaline Dry Cell Primary Batteries Designed For Low To Medium Drain Continuous And Pulse Discharge Electronic Equipment , One Complete Portable Hydraulic Drilling Unit - One Complete Portable Hydraulic Drilling Unit With Built In Compressor And Portable Hydraulic Power Pack Powered By A 14 Hp 4 Stroke Engine With Built In Air Compressor Flushing System To Eliminate The Need For External Air Or Water When Clearing Dust Cutting Four Selectable Blow Frequency And Rotation Modes Anti Vibration Handles And Hex Shank Chuck Holder Compete With Heavy Duty Supply Return Hydraulic Hose Lines Quick Release Couplings , Brick Trowel Steel Of Professional Grade With A Blade Length Of 305 Mm Precision Forged From A Single Piece Of High Carbon Steel, With High Quality Seasoned Wooden Handle , Brick Hammer With Handle Of Nominal Weight 1.2 Kg - Brick Hammer With Handle Of Nominal Weight 1.2 Kg Made Of High Carbon Steel Fully Killed Heat Treated And Hardened For Durability The Hammer Shall Feature One Square Striking Face And One Flat Chisel Shaped End For Clean Breaking And Dressing Of Bricks , Aluminimum Straight Edge For Floor Plastering 50Mm Square 2Mm Thick And1800mm Long Made Of High Grade Extruded Aluminium Alloy , Plaster Trowel Made Of High Carbon Spring Steel Of Min Thickness 0.7Mm The Blade Shall Be Securely Att To A Hvy Duty Aluminium Alloy Mounting , Galvanised Iron Pan Mortar Tasla Pressed From 16 Gauge Ms Sheet Having 400Mm Dia And Depth Of 150Mm Minimum Weight Of 1.5 Kg , Fish Line Made Of Nylon With A Min Dia Of 1.5Mm - Fish Line Made Of Nylon With A Min Dia Of 1.5Mm Having High Tensile Str And High Visibility Colour The Line Must Be Stretched Taut Between Established Colns To Ensure The Horizontal Alignment And Uniform Course Height Of Masonry , Plumb Bob Made Of Hardened Steel Iron Weighing Min 400Gms With A Corrosion Resistant Finish And A Replacable Hardened Steel Tip Connected With High Strength Braided Nylon Line For Durability , Rammer Made Of Heavy Duty Cast Iron Ms - Rammer Made Of Heavy Duty Cast Iron Ms The Base Plate Area Of Approx 150 X 150 Mm Is Provided A 6 Ft Long Hard Wooden Handle Is Provided For Proper Gripping Of The Ramming Tool Minimum Weight Of 5 Kg Without Handle Is Permissible , Picks Axes With Chiesel And Pointed Ends Nominal Weight 3.0 Kg Overall Length 595 Mm With Hard Wooden Handle , Showel Square Nose 14 Gauge Tata High Carbon Steel Blade Size 310 X 245 Mm Shaft Size 710 Mm Fitted With Strong Steel Crutched Hard Wooden Handles , Fawada Of Size 150 X 275Mm Made Of High Tempered Iron Mild Steel With A Min Thickness Of 1.5Mm And Securely Fitted With A Straight Grained Hardwood Handle For Proper Grip And Min Wt Of 2 Kgs , Painting Brush Flat Of 100Mm Width With Pure Natural Bristles Or High Quality Synthetic Filaments - Painting Brush Flat Of 100Mm Width With Pure Natural Bristles Or High Quality Synthetic Filaments, Securely Fixed With Corrosion Resistant Ferrule The Brush Shall Have A Balanced Ergonomically Shaped Hardwood Or High Impact Plastic Handle , Multipurpose Non Slip Reusable Gloves Made Of Premium Grade Natural Latex Or Synthetic Nitrile Rubber - Multipurpose Non Slip Reusable Gloves Made Of Premium Grade Natural Latex Or Synthetic Nitrile Rubber Should Have Honeycomb Textured Palms And Fingertips For Superior Non Slip Performance Soft Flock Interior Lining For Moisture Absorbtion Comfort And Ease Of Working Colour Olive Green , Aluminium Spirit Level 12 Inch Must Be Rust Proof And Should Have An Extruded Aluminium Profile , Water Leveling Tube Should Be Made Of Heavy Duty Crystal Clear Flexible Pvc - Water Leveling Tube Should Be Made Of Heavy Duty, Crystal Clear Flexible Pvc It Should Have A Min Internal Dia Of 8Mm And Wall Thickness Of 1.5Mm The Tube Shall Be Free From Defects Kinks Opacity Ensuring Clear Visibility Of Water It Should Have A Length Of 50 Mtr , Cutting Pliers Of Length 210 Mm With High Grade Steel And Serrated Jaws And Insulated Handles , Measuring Tape Should Be Heavy Duty And A Retractable Type Of Length 15M Made Of Steel - Measuring Tape Should Be Heavy Duty And A Retractable Type Of Length 15M Made Of Steel It Should Be Nabc Credited And Nylon Coated With Abrasion Resistance Housed In An Impact Resistant Abs Rubber Overmould Case , Fire Extinguisher 2 Kgs Capacity Abc Map 90 Along With Its Accessories
Basic Detail
Tender No GEM/2026/B/8088765
Bidding Type Tender
Location
City Baramulla
State Jammu and Kashmir
Key Dates
Publish Date 26 Sep 2026
Submission Date 07 Oct 2026
Open Date 08 Oct 2026
Finance
Tender Value 3.17 Crore
Tender Fee Ref. Documents
EMD 15.87 Lakhs
Exemption Not Available
Document List
04beb27c-ca7f-48ce-b6fc-053baee38c73.pdf
rfp__merged_-15_2026-09-26-20-21-10_d246134e041d0f2747ed21452f6a0e4a.pdf
9952625_Boq_1.xlsx

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 26, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Oct 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
pdf

04beb27c-ca7f-48ce-b6fc-053baee38c73.pdf

pdf

rfp__merged_-15_2026-09-26-20-21-10_d246134e041d0f2747ed21452f6a0e4a.pdf

xlsx

9952625_Boq_1.xlsx

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders