Tender For special Repair To Bldg No. T-67 And Mt Sheds (T-87 & T-88) At Sheron Lines Of 252 Para Ad Bty Under Ge (East) Agra
Tender Value
81.67 Lakhs
Estimated cost
Bid Submission
24 Oct 2026
20 days left
EMD
1.47 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No. T-67 And Mt Sheds (T-87 & T-88) At Sheron Lines Of 252 Para Ad Bty Under Ge (East) Agra
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | M&L for average 75 mm thick PCC 1:3:6, Type C-2, using 40 mm graded stone aggregate, laid in sub-floors, sub-bases, floors, pavings, etc., including necessary formwork and finishing the surface even and rough to receive the topping layer, complete all as specified and directed. |
| 3 | M&L for average 100 mm thick PCC 1:2:4, Type B-2, using 40 mm graded stone aggregate, laid in floors and pavings, finished even and fair without using extra cement, and laid in alternate bays, complete all as specified and directed. |
| 4 | M&L for average 25 mm thick PCC 1:2:4, Type B-0, using 12.5 mm graded stone aggregate, laid as sub-base to flooring, finished even and fair without the use of extra cement, complete all as specified and directed. |
| 5 | M&L for machine cut kota stone slab 20-25 mm thick laid in floors etc over & including 20mm thick screed bed or bedding layer in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing by machine complete all as specified and as directed |
| 6 | M&L for machine cut kota stone slab 20-25 mm thick as in riser/treads of steps (full length in single peice & groove cutting in double line of stair width), skirting, dado, pillar & the like over & including 10mm thick rendering in cement mortar 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing by machine complete all as specified and as directed |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including taking down of backing plaster to brick / concrete wall surface), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | M&L for glazed ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (i.e. 450 x 300 mm or 600 x 300 mm or as directed by Engineer-in-charge) on vertical surfaces such as dado, skirting, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed |
| 9 | M&L for non - skid ceramic coloured tiles (1st quality / premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed |
| 10 | M & L for factory made coloured chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment to match the shade of tiles, over & including 20 mm thick cement screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed. |
| 11 | M&L for providing and laying 80 mm thick factory-made, chamfered-edge cement concrete interlocking paver blocks of M-40 grade, of approved colour, design and pattern, suitable for footpaths, parks, lawns, driveways and light-traffic parking areas, of required strength, size and shape, manufactured by table-vibratory method using PU moulds, laid in the required colour and pattern over and including a 50 mm thick compacted bed of coarse sand, including levelling, compacting and proper embedding of the interlocking paver blocks into the sand bedding layer by vibratory compaction using a plate vibrator, filling joints with fine sand, cutting of paver blocks to required size and shape/pattern, finishing and sweeping off excess sand, including dismantling of existing tiles, complete all as specified and directed.Note :- Shape & size of paver blocks shall be as directed by Engineer-in-charge. |
| 12 | M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copings, kneelers, apex stones, bed plate and similar works including necessary form work (straight or curved) complete all as specified and directed |
| 13 | Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 14 | M&L for brick work with old size, sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed |
| 15 | All as per item No.14 above, but except bricks, including cleaning of old size bricks and removing mortar therefrom complete all as specified and directed.Note :- Serviceable bricks retrieved from item No. 13 shall be reused |
| 16 | M&L for brick work with old-size, Sub-Class ‘B’ bricks, laid straight or curved on plan to any radius, in half-brick-thick walls, built in cement mortar 1:4, complete all as specified and directed. |
| 17 | Taking down cement or cement lime plaster on brick or stone walls or concrete surfaces etc (any thickness) including raking out joints, hacking for key, scrubbing down with water etc, including removal of rubbish off the premises, complete all as specified and as directed |
| 18 | M&L for washed stone grit plaster on exterior walls in two layers, comprising 12 mm thick under layer of cement plaster 1:4 (1 cement : 4 coarse sand), furrowing the under layer with scratching tool, including application of cement slurry over the under layer at the rate of 3 kg of cement per sqm, followed by 15 mm thick top layer of cement plaster 1:½:2 (1 cement : ½ coarse sand : 2 stone chippings of 10 mm nominal size), in panels with grooves all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete all as specified and directed.Note: Grooves shall be measured and paid for separately under the relevant item in this Schedule. |
| 19 | M&L for forming grooves of uniform size 15 mm wide × 15 mm deep in the top layer of washed stone grit plaster, as per approved pattern, using wooden battens nailed to the underlayer, including removal of wooden battens, making good the edges of panels and finishing the grooves, complete all as specified and as directed |
| 20 | M & L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturers instructions) over exterior surface of walls finished even & smooth (without using extra cement) and applying two coats of cement based paint of approved tint over and including a coat of alkali resistant primer complete all as specified and directedNote - Coverage area of smart care ready mix plaster shall be 24-28 Kg/Sqm) |
| 21 | M & L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturers instructions) over interior surface of walls finished even & smooth (without using extra cement) and applying three coats of white wash complete all as specified and directedNote - Coverage area of smart care ready mix plaster shall be 24-28 Kg/Sqm) |
| 22 | M&L for complete removal of existing treatment from old plastered wall surfaces using suitable mechanical devices, including cleaning and preparation of the surfaces, and applying two coats of cement-based paint of approved tint over a coat of alkali resistant primer, complete all as specified and directed. |
| 23 | M&L for complete removal of existing treatment from old plastered wall surfaces using suitable mechanical devices, including cleaning and preparation of the surfaces, and applying two coats of white wash, complete all as specified and directed. |
| 24 | Taking up or down steel water tubing 15 mm bore and connections, including cleaning for refixing, complete all as specified and as directed |
| 25 | All as per Item No. 24 above, but 20 mm bore, complete all as specified and as directed |
| 26 | S&F steel water tubing 15 mm bore with screwed & socket joints, medium grade, galvanized (including short lengths) with and including all fittings, such as sockets, bends, elbows, unions, tees, diminshing pieces etc fixed to walls or ceiling or laid in floors, complete all as specified and directed. |
| 27 | S&F steel water tubing 20 mm bore with screwed & socket joints, medium grade, galvanized (including short lengths) with and including all fittings, such as sockets, bends, elbows, unions, tees, diminshing pieces etc fixed to walls or ceiling or laid in floors, complete all as specified and directed. |
| 28 | S&F in repair bib tap fancy type, cast copper alloy, chromium plated, ISI marked, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified and as directed. |
| 29 | S & F in repair stop valves/angle valve, chromium plated cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, (fancy type) (ISI marked) screwed both ends for 15mm bore iron pipe or for union, complete all as specified and as directed |
| 30 | S & F in repair stop valves with long shank and cup (concealed type), chromium plated cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, (fancy type) (ISI marked) screwed both ends for 15mm bore iron pipe or for union, complete all as specified and as directed |
| 31 | S & F in repair PVC connection 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed |
| 32 | S&F in repairs vitreous China squatting pan pattern(Orissa pattern) size 580mm x 440 mm white with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 33 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, Plastic water closet seat white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 34 | S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. |
| 35 | S & F in repair vitreous china wash hand basin, white, flat-back pattern, size 550 mm x 400 mm, including CI/MS brackets, complete all as specified and directed. |
| 36 | S&F in repair pillar taps, fancy type (foam-flow), of cast copper alloy, chromium plated, ISI marked with capstan heads, screwed-down high-pressure type, with or without lettered ‘HOT’ or ‘COLD’ indication, having long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and as directed. |
| 37 | S&F waste coupling of PTMT, half or full threaded, minimum weight 45 gms for 32 mm size, suitable for wash hand basin, complete all as specified and directed. |
| 38 | S&F in repair vitreous China urinal, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal in white cement including SS grating and union for discharge pipe including PVC waste pipe complete all as specified and directed |
| 39 | S&F in repair 15mm bore chromium plated urinal spreader including PVC connection 15mm size with PTMT nuts of length 300 mm, complete all as specified and directed. |
| 40 | S&F in repair 32 mm dia PVC waste pipe for wash basin/ink/urinals, complete all as specified and directed. |
| 41 | S&F in repair 600mmx450mm bevelled edge looking mirror of selected quality glass, not less than 5 mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 42 | S & F in repair tubular towel rail 60 cm length of stainless steel 20mm dia with bracket type fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed |
| 43 | S & F in repair health faucet with ABS body, chromium-plated, suitable for connection to 15 mm dia pipe, complete with 1.25 metre long flexible hose, ABS wall hook and all necessary fittings, complete all as specified and directed. |
| 44 | S & F in repair fancy type 125mm size square brass, chromium plated, shower rose with or without swivel joints complete all as specified and as directed. |
| 45 | S&F 1000 litre capacity rotational moulded, double layer, ISI marked, polyethylene water storage tanks, (cylindrical vertical with closed threaded top), hoisted and fixed in position, including dismantling of existing tank with ball valve complete all as specified and as directed. |
| 46 | S&F 20 mm PTMT ball valve with epoxy coated aluminium rod & high density plastic float screwed to iron pipe 20 mm bore (minimum weight 210 gms) complete all as specified and directed. |
| 47 | S&F in repair gun metal gate valves with iron wheel head, screwed both ends suitable for 20 mm bore GI pipe complete all as specified and directed. |
| 48 | S&F in repair 75 mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints, laid in floors / fixed to walls including fixing with new clamps and making good the disturbed surfaces in CM 1:4 or PCC 1:2:4 complete all as specified and directed. |
| 49 | S&F in repair 110 mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints, laid in floors / fixed to walls including fixing with new clamps and making good the disturbed surfaces in CM 1:4 or PCC 1:2:4 complete all as specified and directed. |
| 50 | S&F PVC (SWR) bends any radius for 75 mm bore pipe complete all as specified and directed. |
| 51 | S&F PVC (SWR) bends any radius for 110 mm bore pipe complete all as specified and directed. |
| 52 | S&F in repair 150 mm × 150 mm PTMT grating with openable flap, minimum weight 100 gms, complete all as specified and directed. |
| 53 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, 120 mm wide, complete with chromium-plated brackets, guard and railing, 600 mm long, including all necessary fixing accessories, complete all as specified and directed. |
| 54 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc 1.50 sqm each including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs and Cill in CM 1:4 complete all as specified and directed. |
| 55 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs and Cill in CM 1:4 complete all as specified and directed. |
| 56 | M&L for pressed steel door frame, 105 mm × 60 mm, with one or more rebates, including necessary fixing lugs, hinges, locks, striking plates, etc., and applying one shop coat of red oxide primer, complete all as specified and directed.Note: Filling the hollow section of the frame with plain cement concrete shall be measured and paid for separately under relavent item in this schedule. |
| 57 | M&L for pressed steel door frame, 125 mm × 60 mm, with one or more rebates, including necessary fixing lugs, hinges, locks, striking plates, etc., and applying one shop coat of red oxide primer, complete all as specified and directed.Note: Filling the hollow section of the frame with plain cement concrete shall be measured and paid for separately under relavent item in this schedule. |
| 58 | S&F 35 mm thick flush door shutters, solid-core construction, with blockboard core and commercial plywood face panels on both sides, complete all as specified and directed. |
| 59 | S&F 35 mm thick, 2nd Class hardwood (Hollock/Sal/Bijasal), locally fabricated glazed & skeleton door shutters, open-rebated and prepared to receive glass, gauge (without sash bars), with edges of framing plain, chamfered or rounded, fitted with and including mitred beads for securing the glass, with sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a), complete all as specified and directed.Note : Glass or wire cloth, etc. in panels shall be measured and paid for separately under relavent item in this schedule.. |
| 60 | Supply and fixing factory-made steel windows fabricated from 1.25 mm thick primer-coated ERW hollow box section of size 60 mm × 25 mm, single-rebated frame, comprising glazed skeleton shutters made of ERW section 50 mm × 20 mm and 1.0 mm thick sheet, with one or two openable leaves. The shutter shall consist of two Nos. sash bars of T-section 20 mm × 3 mm complete, welded to the frame with one vertical mullion of ERW box-type T-section of size 60 mm × 25 mm and 1.25 mm thick, including cutting holes and making good dismantled portions in PCC (1:2:4), Type B-1, with four Nos. holdfast pockets for each window complete all as specified and as directed including the following fittings welded/fixed to the frame and shutters:(a) MS Holdfasts, 150 mm long, made from 12 mm square bar bent to shape – 04 Nos. per window.(b) Handles made of Z-section, size 20 mm x100 mm long – 01 No. per leaf.(c) Stoppers – 01 No. per leaf.(d) Cleats, 55 mm long, made of hollow section 15 mm × 20 mm × 63 mm, welded to hinges – 01 No. per leaf.(e) MS pintle hinges of size 75 mm × 75 mm × 12 mm – 02 Nos. per leaf.(f) MS tower bolt/barrel bolt of 100 mm size on suitable length & size of flat iron - 02 Nos per leaf.(g) Fabrication and fixing arrangement as per TD No. CELZ/C-TD/130.Note: Glass panes and painting shall be measured and paid for separately under the relevant items. |
| 61 | Supply and fixing factory-made steel window fabricated from 1.25 mm thick primer-coated ERW hollow box section of size 60 mm × 25 mm, single-rebated frame, comprising gauged skeleton shutters made of ERW section 50 mm × 20 mm and 1.0 mm thick sheet, with one or two openable leaves, without sash bars. The shutters shall be welded to the frame with one vertical mullion of ERW box-type section of size 60 mm × 25 mm and 1.25 mm thick, including cutting holes and making good dismantled portions in PCC (1:2:4), Type B-1, with four Nos. holdfast pockets for each window, complete all as specified and directed including the following fittings welded/fixed to the frame and shutters:-(a) Mild steel holdfasts, 150 mm long, made from 12 mm square bar bent to shape – 04 Nos. per window.(b) Handles made of Z-section, size 20 mm × 100 mm long – 01 No. per leaf.(c) Stopper – 01 No. per leaf.(d) Cleat, 55 mm long, made of hollow section 15 mm × 20 mm × 63 mm, welded to hinges – 01 No. per leaf.(e) Mild steel pintle hinges of size 75 mm × 75 mm × 12 mm – 02 Nos. per leaf.(f) MS tower bolt/barrel bolt of 100 mm size on suitable length & size of flat iron - 02 Nos per leaf.(g) Grills fabricated from 12 mm MS square bars welded to flat iron frame, with guard bars spaced at 100 mm c/c, complete.The complete assembly shall conform to TD No. CELZ/C-TD/130.Note: Wire mesh and painting shall be measured and paid for separately under relevant items. |
| 62 | Ditto all as per Item No.60 & 61 here-in-before, but fixed-type ventilator, partly glazed and partly gauzed with spring catch as specified in IS, complete all as specified and directed.Note :- Figured glass and painting shall be measured and paid for separately under relevant items |
| 63 | S&F 3 mm thick ordinary quality sheet glass in panes not exceeding 0.50 Sqm each, glazing with oil putty or fixed with glazed pins and beads including sealing all edges and corners of the glass with silicone sealant, complete all as specified and directed |
| 64 | S&F galvanized mild steel wire cloth, made of 0.56 mm nominal diameter wire, having an average aperture width of 1.18 mm, complete all as specified and directed. |
| 65 | S & F 3 mm thick figured glass, pin head type, in panes n.exc 0.5 sqm each, glazed with oil putty complete all as specified and directed. |
| 66 | S&F in repair 25 mm thick pre-laminated particle board, interior grade, pre-laminated on one side with decorative laminate of approved shade/design and on the other side with balancing white laminate, for cupboard shutters and the like, fixed with screws to timber framework, including 10 mm thick minimum wooden beading all around, duly varnished and finished flush with the particle board, complete all as specified and directed. |
| 67 | S&F factory-made solid-panel PVC door shutter, 30 mm thick (style), consisting of a frame fabricated from MS tubes for the top and bottom rails. The MS frame shall be covered with heat-moulded, plain-colour PVC ‘C’ channels, incorporating 20 mm wide PVC sheet strips fixed inside with solvent cement for the stiles. Plain-colour PVC sheets shall be provided for the top rail, lock rail and bottom rail on both sides, including suitable gap inserts for the top and bottom rails. Panelling with plain-colour PVC sheets shall be fitted into the MS frame and securely welded/sealed to the stiles and rails using suitable PVC sheet beading, with joints properly bonded using solvent cement, complete all as specified and directed. |
| 68 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed |
| 69 | S&F PVC door back-side stopper, 75 mm long, complete all as specified and directed. |
| 70 | S&F aluminium anodised barrel tower bolts of extruded section, with bolt length 150 mm, complete all as specified and directed |
| 71 | S&F aluminium anodised cast-type handles of size 150 mm, complete all as specified and directed. |
| 72 | S&F aluminium alloy anodised sliding door bolts with hasp and staple (bolt type), including fixing clips of sheet, cast or extruded sections, and sliding bolts of extruded section or cast aluminium alloy, with bolt length 300 mm, complete all as specified and directed |
| 73 | S&F stainless steel butt hinges, medium weight, of 100mm long fixed with stainless steel screws, complete all as specified and directed |
| 74 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard-drawn steel spring, suitable for fixing to the floor, with cover plate of 150 mm overall length, complete all as specified and directed. |
| 75 | S&F mild steel helical door springs, 300 mm long, ordinary rat-tail type, including roller and roller plate, complete, fixed with screws to wooden frames or by welding to steel frames, complete all as specified and directed. |
| 76 | S&F 125 mm long, aluminium anodised hasp and staple, safety type, including bolt for fixing to hinge plate and complete with necessary screws and fittings, complete all as specified and directed. |
| 77 | S&F brass magnetic catch suitable for cupboard/cabinet shutters, including necessary fixing screws, complete all as specified and directed |
| 78 | S&F in repairs stainless steel decorative curtain rods, 25 mm bore and 1.0 mm thick, including 02 Nos. brackets and 02 Nos. finials, fixed on walls / beam with PVC rawl plugs & steel screws complete all as specified and directed. |
| 79 | Dismantling of brick tiles from roof top, laid and bedded and pointed in any type of mortar, including carefully removing the dismantled materials from site and disposing of the same as directed, complete all as specified and directed. |
| 80 | M&L for cement concrete 1:2:4, Type B-0, using 12.5 mm graded crushed stone aggregate, laid in roof kerbs, copings, padding, filling to hollow door frames, mud stops and similar works, including necessary formwork, whether straight or curved, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 81 | M&L for cement concrete 1:2:4, Type B-0, using 12.5 mm graded crushed stone aggregate, laid in roof kerbs, copings, padding, filling to hollow door frames, mud stops and similar works, including necessary formwork, whether straight or curved, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender