Tender For Special Repairs To External Electrification Including Replacement Of Plain Cement Concrete Poles And Lt Oh/Ug Cabling System At City Area, Military Station Alwar Under Ge Alwar.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
22 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To External Electrification Including Replacement Of Plain Cement Concrete Poles And Lt Oh/Ug Cabling System At City Area, Military Station Alwar Under Ge Alwar.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for taking down existing overhead ACSR conductor of any type and size, including taking down all connected accessories and removing the same to store/place as directed by Engineer-in-Charge, complete all as specified and directed. |
| 2 | Dismantling existing U/S/cracked PCC poles of any size and type from their position, including necessary excavation and earthwork in any type of strata, demolition of concrete foundation, disconnecting street light fittings and other connected accessories and removing dismantled poles/material from site to store/place as directed, complete all as specified and directed. |
| 3 | S&F in replacement steel tubular swaged pole, 9 metre long, Type 410 SP-31, conforming to relevant IS, erected and fixed in true vertical position complete with cast iron base plate, finial/taper plug, bolts, nuts and screws, including one coat of red oxide primer and two coats of aluminium paint and applying two coats of bituminous paint internally and externally to bottom portion up to 1.80 metre length, complete all as specified and directed. Make: National Tubing Co., Kanpur / Ridi Poles, Vadodara / Sohanlal & Sons, Ghaziabad or equivalent as approved by GE. |
| 4 | S&F, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip/wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 Volts grade, 70 Sqmm, 3.5 core, complete all as specified and directed. |
| 5 | S&F, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip/wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 Volts grade, 95 Sqmm, 3.5 core, complete all as specified and directed. |
| 6 | S&F, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip/wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 Volts grade, 120 Sqmm, 3.5 core, complete all as specified and directed. |
| 7 | S&F, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip/wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 Volts grade, 50 Sqmm, 3.5 core, complete all as specified and directed. |
| 8 | S&F, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip/wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 Volts grade, 25 Sqmm, 3.5 core, complete all as specified and directed. |
| 9 | S&F, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip/wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 Volts grade, 16 Sqmm, 2 core, complete all as specified and directed. |
| 10 | S&F, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip/wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 Volts grade, 10 Sqmm, 2 core, complete all as specified and directed. |
| 11 | M&L for cable route indicator made out of CI plate 100 mm dia and 6 mm thick, fixed over angle iron 60 x 60 x 6 mm, 1200 mm long, duly painted with aluminium paint, suitable for LT underground cable, including embedding in PCC 1:3:6 Type C-1 foundation of size 300 x 300 x 200 mm in ground, complete all as specified and directed. |
| 12 | Excavation in trenches n exc 1.50 metre wide and n exc 1.50 metre deep for laying underground cables and foundations of poles/stay assemblies, in any type of soil, complete all as specified and directed. |
| 13 | Returning, filling in excavated earth including spreading, levelling, watering and well ramming in layers n exc 250 mm thick in any type of soil, complete all as specified and directed. |
| 14 | Removing surplus excavated soil to a distance n exc 50 metres and depositing where directed at a level n exc 1.50 metre above the starting point, complete all as specified and directed. |
| 15 | M&L for fly ash bricks conforming to IS 13757, old size, laid dry and flat over underground cable for protection, width equal to length of brick, bricks abutted with gap between adjacent bricks n exc 10 mm, complete all as specified and directed. |
| 16 | M&L for sand cushioning to underground PVC/XLPE cable with approved quality sand, including spreading and levelling to required thickness, complete all as specified and directed. |
| 17 | S&F in repair GI tubing, light grade, 80 mm bore, as protection to underground cable at road crossings/hardstandings/poles, fixed with clamps as per site requirement, complete all as specified and directed. |
| 18 | Cutting road/hardstanding n exc 200 mm in width and n exc 600 mm in depth for laying LT underground cable/protection pipe, including making good disturbed portion to match existing finish or with PCC 1:2:4 Type C-1 as applicable, complete all as specified and directed. |
| 19 | M&L in replacement of straight-through joint suitable for 70 Sqmm, 3.5 core, armoured LT XLPE cable, 1100 Volt grade, heavy duty, including all jointing materials/accessories, testing and making cable fully functional, complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L in replacement of straight-through joint suitable for 120 Sqmm, 3.5 core, armoured LT XLPE cable, 1100 Volt grade, heavy duty, including all jointing materials/accessories, testing and making cable fully functional, complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L in replacement of straight-through joint suitable for 95 Sqmm, 3.5 core, armoured LT XLPE cable, 1100 Volt grade, heavy duty, including all jointing materials/accessories, testing and making cable fully functional, complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L in replacement of straight-through joint suitable for 50 Sqmm, 3.5 core, armoured LT XLPE cable, 1100 Volt grade, heavy duty, including all jointing materials/accessories, testing and making cable fully functional, complete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L in replacement of straight-through joint suitable for 25 Sqmm, 4 core, armoured LT XLPE cable, 1100 Volt grade, heavy duty, including all jointing materials/accessories, testing and making cable fully functional, complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm thick, buried directly in ground in earth pit not less than 2.25 metre deep, top edge of plate not less than 1.50 metre below normal ground level, connected to 4 mm dia GI wire earthing lead by GI/steel bolts, nuts, check nuts and washers including welding at joints, excavation and earthwork, 15 mm bore light-grade GI pipe for protection of earth lead up to earth test point, galvanised iron/steel earth test point 75 x 75 x 25 mm, charcoal dust and common salt, PCC 1:2:4 Type B-1 chamber, MS angle iron frame 40 x 40 x 3 mm and 40 mm thick RCC 1:2:4 Type B-1 cover reinforced with 6 mm dia bars @ 75 mm c/c both ways with 12 mm dia MS handle, GI funnel with wire mesh and 20 mm dia light-grade GI watering pipe, including connection and testing, complete all as shown in relevant SSR Part-I plate, specified and directed. |
| 25 | S&F in repairs street-light bracket fabricated to required shape and angle from 32 mm dia light-grade GI tubing/suitable size, length not less than 1.00 metre, suitable for fixing/holding street/security-light fitting, including two Nos MS flat iron clamps 32 x 3 mm with bolts, nuts and washers, fixed complete all as specified and directed. |
| 26 | M&L in repair for galvanised steel tubing, medium grade, 40 mm bore, with and including all fittings and connections, fixed complete all as specified and directed. |
| 27 | S&F, installing, testing and commissioning outdoor weatherproof bus-bar chamber, size 600 x 450 x 450 mm, fabricated from 3.15 mm thick MS sheet, having two-side openable hinged door shutters with suitable locking arrangement and two Nos 600 mm long MS angle iron legs 50 x 50 x 6 mm welded to chamber, complete with four Nos aluminium bus bars of 200 Amp rating, erected on ground over and including PCC 1:3:6 Type C-2 foundation, including one coat of approved primer and two coats of synthetic enamel paint, cable glands, lugs/thimbles, internal wiring/connections and all necessary accessories, complete with the following switchgear and metering arrangement, complete all as specified and directed: Incoming MCCB – 100 Amp, 25 kA, 4 Pole, 415 Volt, adjustable thermal magnetic release type – 1 No.; Indication lamps – 1 Set; Voltmeter 0–500 Volt with selector switch – 1 No.; Ammeter 0–500 Amp with selector switch – 1 No.; Outgoing MCCB – 63 Amp, 25 kA, 4 Pole, 440 Volt – 1 No.; Space and MCB channel suitable for installation of 20 Nos SPN MCBs. |
| 28 | S&F, installing, testing and commissioning factory-made, floor-mounted outdoor type LT feeder panel board, cubicle type, size 1200 x 1000 x 500 mm, suitable for 415 Volts, 3 Phase, 4 Wire, 50 Hz AC supply system and CPRI tested, having bus-bar chamber with insulated colour-coded aluminium bus bars for three phases and neutral mounted on epoxy type insulators, detachable bottom plate with provision for entry of cables of adequate size with glands, dust and vermin proof construction with IP-65 protection, fabricated from 3.2 mm thick CRCA MS sheet, powder-coated finish externally and suitably painted internally, both-side openable arrangement, including internal wiring with IS 694 marked, 1100 Volt grade PVC insulated copper conductor cable of appropriate size but n less than 2.5 Sqmm, including grouting of panel 450 mm above ground level with 900 mm long MS angle iron frame 50 x 50 x 6 mm welded at all four corners and embedded in PCC 1:2:4 using 20 mm graded stone aggregate up to 300 mm above ground level, complete with incoming 400 Amp, 36 kA, 3 Pole adjustable thermal magnetic MCCB – 1 No.; digital combined ammeter and voltmeter – 1 No.; 400 Amp aluminium bus bars with insulators – 4 Nos; instrument control fuses and RYB indication lamps; outgoing 160 Amp, 25 kA, 3 Pole adjustable thermal magnetic MCCB – 2 Nos; outgoing 100 Amp, 25 kA, 3 Pole adjustable thermal magnetic MCCB – 2 Nos and space for one additional MCCB, including all necessary cable glands, lugs/thimbles, connections and accessories, complete all as specified and directed. |
| 29 | All as per preceding LT feeder panel board item but provided with incoming 400 Amp, 36 kA, 3 Pole adjustable thermal magnetic MCCB – 1 No.; digital combined ammeter and voltmeter – 1 No.; 600 Amp aluminium bus bars with insulators – 4 Nos; instrument control fuses and RYB indication lamps; outgoing 250 Amp, 36 kA, 3 Pole adjustable thermal magnetic MCCB – 1 No.; outgoing 160 Amp, 25 kA, 3 Pole adjustable thermal magnetic MCCB – 2 Nos and outgoing 100 Amp, 25 kA, 3 Pole adjustable thermal magnetic MCCB – 1 No., including all necessary internal wiring, cable glands, lugs/thimbles, connections and accessories, complete all as specified and directed. |
| 30 | S&F, installing, testing and commissioning in replacement lithium based Solar LED Security Light System with built-in battery, PV panel and LED lamp in FRP/aluminium body, including taking down existing U/S light fitting of any size/capacity, comprising 30 Watt monocrystalline PV panel, 15.4 Ah lithium cell with inbuilt BMS, high brightness 16 Watt LED lamp, CRI >70, CCT 6500K, microcontroller based charge controller-cum-driver with automatic dimming function and dusk-to-dawn operation, suitable for working temperature (-)10°C to (+)55°C, complete with adjustable MS clamp and 40 mm dia arm suitable for pole/wall mounting, complete all as specified and directed. |
| 31 | S&F decorative tricolour LED pole light, 3 metre high, comprising GI PU painted pole and polycarbonate/acrylic light fitting, 75 Watt ±10%, 240 Volt, power factor >0.90, saffron-white-green colour output in sequence and driver efficiency not less than 80%, complete with 300 mm dia x 12 mm thick base plate, 260 mm PCD holes, foundation bolts and necessary PCC foundation/plinth, fixed, connected, tested and commissioned complete all as specified and directed. Make: Halonix / Havells / Bajaj / Crompton or equivalent as approved by GE. |
| 32 | S&F, installing, testing and commissioning in replacement high intensity LED based street light fitting, 90 Watt, new generation energy efficient type, pressure die-cast aluminium body, IP-65/IP-66 roadway luminaire with high power LED as light source, two lenses and lumen output exceeding 10,000 lumens, internally prewired and complete with all fittings and accessories, including taking down existing U/S fitting, complete all as specified and directed. |
| 33 | S&F in replacement globe shaped post-top gate light lantern in frosted finish made out of polycarbonate, suitable for LED lamp up to 27 Watt, including taking down existing U/S globe/light fitting, fixing, connecting and testing new fitting, complete all as specified and directed. |
| 34 | S&F in replacement bamboo type LED garden light fitting, 9 Watt, including LED lamp, necessary PCC work, foundation/fixing nuts, bolts and all mounting accessories, including taking down existing U/S light fitting of any type and size, fixing, connecting and testing, complete all as specified and directed. |
| 35 | S&F in replacement intelligent, flexible and smart outdoor lighting control unit for automatic switching ON at dusk and automatic switching OFF at dawn, complete with astronomical time switch, high and low voltage protection, 3 Pole/230 Volt arrangement suitable for 12 kW load equally distributed over three phases, minimum IP-54 degree of protection, including taking down existing U/S unit, fixing, connecting, testing and commissioning, complete all as specified and directed. |
| 36 | M&L in replacement of service wire from junction box to street light fitting comprising 1.5 Sqmm, 3 core, PVC insulated and PVC round sheathed multistranded copper conductor flexible industrial cable, 1100 Volt grade, drawn through PVC conduit in street light poles, including all connections, testing and necessary T&P such as ladders/hydra required for connection to street light fittings, complete all as specified and directed. |
| 37 | S&F in repairs street light fitting comprising 4 metre high cast iron pole, antique copper colour, complete with two Nos 40 Watt LED bowl type light fittings, 2.5 Sqmm PVC insulated copper conductor cable for internal connection to LED lamps and three Nos hot-dip galvanised anchor bolts, including excavation and PCC 1:3:6 Type C-2 foundation using 40 mm graded stone aggregate of size 450 x 450 x 1500 mm, fixing, connecting, testing and commissioning complete all as specified and directed. Make: Havells / Bajaj / Philips / Halonix or equivalent as approved by Engineer-in-Charge. |
| 38 | M&L in replacement outdoor LT cable junction box made out of glass fibre reinforced polycarbonate, size n less than 225 x 295 x 122 mm, suitable for cable size up to 35/50 Sqmm, recyclable, halogen and silicon free, anti-acid, anti-corrosive, weatherproof, UV resistant and rainwater resistant, having IP-66/IP-69 ingress protection conforming to IEC 60529 and IK-08 impact protection, with internally embedded polyurethane gasket, fire retardant and self-extinguishing construction, complete with one No. 4 Pole connector/terminal strip/bus bar, one No. SP 'B' curve MCB 6–32 Amp, chromium plated clamps, nuts, bolts and cable glands, including taking down existing U/S junction box, fixing new box, making cable connections, testing and commissioning complete all as per manufacturer's instructions, specified and directed. Make: Hensel / Siemens / GE Power / Rittal or equivalent as approved by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender