Tender For Work-07 Repair And Painting Work At Nandan Park, Located In Lohiya Nagar (Lal Quarter Area) (City Zone Ward-69).
Tender Value
9.98 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
12 days left
EMD
29963
Bank guarantee accepted
Document Fee
1416
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work-07 Repair And Painting Work At Nandan Park, Located In Lohiya Nagar (Lal Quarter Area) (City Zone Ward-69).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). |
| 2 | Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the 2 Engineer-in-charge within a distance of 60 meter (200feet). |
| 3 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge |
| 4 | S/L P:C:C (1:6:12) with 40 mm gauge brick ballast, fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, 4 tools, & plant etc all completed as per the direction of engineer in-charge. (AS PER PWD SOR 2022 PAGE NO 18 SI NO 5.01 ITEM NO 273) |
| 5 | cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etc all completed 5 as per the direction of engineer - in -charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a) |
| 6 | S/L of stone ballast 22.4 to 53 mm size with stacking for 10 measurment etc all complete as per the direction of engineer in-charge AS PER PWD SOR 2020 RMR |
| 7 | Supply of screening material with stacking for measurment 11 etc all complete as per the 7 direction of engineer in-charge AS PER PWD SOR 2020 RMR |
| 8 | Consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2/3 as per Technical Specification Clause 405. AS PER PWD SOR 2022 20.2.1 |
| 9 | Laying of Interlocking Tiles of 60 to 80 mm thick including levelling and dressing of surface up to required level and slopes over 30 mm thick bed and filling joints with fine sand including cost of fine sand, labour, 9 T&P etc complete But excluding cost of Tile as directed by Engineer in charge.AS PER PWD SOR 2022 20.13 NEW ITEM |
| 10 | Supply & laying 80 mm thick Precase cement concrete ishape interlocking paver block (Grey color) with top layer of minimum 8 mm thickness having plan dimension 00X(160+120mm) of O.P cement smoothing gloss finish, skid resistant manufacturered from rubber moulds M-30 GRADE AS PER SOR 2022. |
| 11 | 12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW ITEM) |
| 12 | Providing wall putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats |
| 13 | Finishing wall with weather coat of approved make and quality on old surface with two or more coat to give an even even shade after throughly brushing the surface freel from mortar droping and other foreign matters and sand papered |
| 14 | Painting or varnishing with valsper or other approved high grade enamel or superior synthetic clean varnish complete one coat over previously painted surface. including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISi no. 105/106/133-1950. As in item (647) above but for every subsequent coat on previously treated |
| 15 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for |
| 16 | S/L C:C (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. (AS PER PWD SOR 2022 279 (a). |
| 17 | Painting or varnishing with valsper or other approved high grade enamel or superior synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISi no. 105/106/133-1950. As in item (647) above but for every subsequent coat on previously treated |
| 18 | Deduct of old bick Bats |
| 19 | Deduct of old Brick |
| 20 | Desposal of refused material/malwa distance up to 8 direction of engineer in charge. (AS PER PWD SOR 2020/231(a). |
| 21 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender