Tender For Renovation Of Entrance Lobby And Classrooms In Training Institute
Tender Value
28.94 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
2 days left
EMD
57900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Entrance Lobby And Classrooms In Training Institute
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Oct-2026 | Corrigendum to tender Notice No. 1 | Date | 19-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing doors, windows, ventilator including removal of shutters, hinges, holdfasts and all other fittings and stacking serviceable materials within CSL premises at a lead of 100m and disposing of the unserviceable materials at locations inside CSL as directed by the Engineer-in-charge. The rate shall include the cost of all labour, hire charges of tools & plants, and all other incidental charges etc. complete. |
| 2 | Dismantling and removing the existing floor tiles set in cement mortar by manual/ mechanical means, including breaking down the dismantled materials into pieces not exceeding 15 cm in size, removing and disposing of all unserviceable materials and debris to the Shipyard Estate at Cheriya Kadavanthra, including levelling the area.The rate shall include all labour, hire for tools & plants, disposal, levelling, other incidentals etc. complete all as per the direction of Engineer-in-charge. |
| 3 | Dismantling, clearing away masonry walls of any thickness, constructed of brick, laterite or rubble in cement mortar by manual/ mechanical means including breaking down the dismantled materials into pieces not exceeding 15 cm in size, removing and disposing of all unserviceable materials and debris to the Shipyard Estate at Cheriya Kadavanthra, including levelling the area. The rate shall include all labour, hire for tools & plants, disposal, levelling, other incidentals etc. complete all as per the direction of Engineer-in-charge. |
| 4 | Dismantling existing AC/ Calcium silicate ceiling including suppports including disposing of all unserviceable materials in to the scrap yard/ dumping area inside CSL including all labour, other incidentals, hire for tools & plants etc. complete all as per the direction of Engineer-in-charge. |
| 5 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor II level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer in-Charge. The rate shall include all materials, labour, hire for tools & plants, other incidentals etc. complete all as per the direction of Engineer-in-charge. (The payment of RCC band and reinforcement shall be made for seperately). |
| 6 | Providing and laying reinforced cement concrete 1:2:4 using 20mm down graded broken granite metal in ground floor upto IInd floor including cost and conveyance of all materials, labour, cement, formwork, mixing, laying, consolidating, curing,cost of dewatering etc. complete all as per the direction of Engineer-in-Charge. |
| 7 | Plastering with C.M 1:4, 12mm thick for floated hard and trowelled smooth including cost and conveyance of all materials, cement, labour, curing etc. complete all as directed by the Engineer-in- charge. |
| 8 | Providing and fixing in position fully glazed aluminium super sliding window/ventilator with lock system, powder coated aluminium heavy section with sliding shutters using following sizes or nearest available size 63.5 x 31.75 x 1.60 mm for frames, 38.10 x19.5 x 1.60mm for shutter interlock, vertical and horizontal and plain glass 4mm thick including all fixtures like hinges, locking arrangements, handles, EPDM beadings etc including cost and conveyance of all materials labour, other incidentals etc. complete. |
| 9 | Providing and fixing in position powder coated aluminium double leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 47mm x 44mm x 2mm, bottom horizontal member of size 95mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock,1 no tower bolt, 4 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 2 nos of door closer of approved make. |
| 10 | Providing and fixing in position powder coated aluminium single leaf door with outer frames of size 63.5mmx38.1mmx2mm or nearest available size all round, vertical styles & top horizontal member of size 47mm x 44mm x 2mm, bottom horizontal member of size 95mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materialsand fixing etc., complete. The door is to be provided with 1no. door lock, 2 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1no of door closer of approved make. |
| 11 | Providing and fixing in position Fully Glazed Aluminium Partition using 63.5x38.1x2mm thk. or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 5mm thk plain glass fixed with necessary EPDM beading including cost and conveyance of all materials labour etc.complete. |
| 12 | Providing and fixing in position aluminium partition using 63.5x38.10x2mm thk.or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8 mm thick particle board fixed with necessary EPDM beading including cost and conveyance of all materials labour etc.complete. |
| 13 | Supplying and pasting sun control film (check/strip frosted) to the shutter of glazed doors/windows/partitions after cutting to the required size including cost and conveyance of all materials labour other incidentals etc. complete all as directed by the Engineer- in- charge. |
| 14 | Providing and applying white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including cost and conveyance of all materials labour other incidentals etc. complete all as directed by the Engineer- in- charge. |
| 15 | Painting with one coat of water thinnable cement primer of approved premium quality and shade after rubbing and cleaning the surface including cost and conveyance of all materials, labour, scaffolding other incidentals, curing (wherever required) etc.complete all as directed by the Engineer- in- charge. |
| 16 | Painting with ready mixed plastic emulsion paint of approved premium quality and colour in two coats on old/ new surfaces after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete all as directed by the Engineer- in- charge. |
| 17 | Painting on iron or wood surface with synthetic enamel paint of approved premium quality and colour in one coat on new/ old surfaces after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials labour, scaffolding other incidentals etc. complete all as directed by the Engineer- in- charge. |
| 18 | Painting with Damp proof paint of approved premium quality and required shade one coat on old surface after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required complete including cost and conveyance of all materials, labour, scaffolding other incidentals etc. all as directed by the Engineer- in- charge. |
| 19 | Providing & installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. Grids width: 24 mm finished in approved shade. The main runners & cross Tees to have \\"stab\\" installation system made of corrosion protected galvanized steel or approved equivalent. Ceiling tiles are tegular edged Calcium Silicate ceiling tile of size 595x595x15mmtk. GI sections for use as Main Runners are 24 x 38 x 0.30 mm, Cross Tees are 24 x 25 x 0.30 mm, and Wall Angles are 24 x 24 x 0.40 mm and GI channel supports (GI sections can be changed to higher sections having same or greater thickness to suit the site conditions). False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc. Rate quoted to include cost and conveyance of all materials, all cut outs required for light fixtures, labour cost, hire charges of equipments, consumables, scaffolding cost, other incidentals etc. complete all as directed by the Engineer-in-charge. |
| 20 | Supplying & replacing Calcium silicate ceiling board of size 595x595x15mm tegular edged to the existing aluminum frame work in all floors of the building at places wherever required including cost and conveyance of all materials labour charges, scaffolding and other incidentals etc complete all as directed by the Engineer-in-charge. |
| 21 | Providing & fixing in position manually operated Roller Blinds of approved shade and colour with good quality fabric including cost and conveyance of all materials all labour, other incidentals etc. complete all as directed by the Engineer-in-Charge. |
| 22 | Providing and laying double charge glossy light shaded vitrified floor tiles not less than 1200 x 600mm or more available size of approved make, quality and colour after clearing the floor/ scraching the old tiles properly by pasting with chemical adhesive Cerabond and equivalent and pointing the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge (Basic rate of light shade tile = ₹620/m2 excluding GST) |
| 23 | Providing and laying Ceramic floor tiles not less than 600 x 600mm or more available size of approved make, quality and colour after clearing the floor properly by pasting with chemical adhesive Cerabond or equivalent including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge (Basic rate of tile Rs.600/m2 Excl GST) |
| 24 | Supplying and laying approved type Step Tiles of size 900x300mm or more available size as approved by Engineer in Charge, set in CM 1:3 20mm thick and adding necessary cement grout for the proper binding of the tiles to line and level, pointing the joints with coloured cement to match with the tiles including cost and conveyance of all materials, cement, labour other incidentals etc. complete, all as per the directions of Engineer-in-charge (basic rate of tile is Rs. 1310/m2) |
| 25 | Pressure grouting in Concrete/Masonry area etc using High performance polyurethane grout of approved brands like CERA ,SIKA, FOSROC,PIDILITE, etc , Insert 10 mm OD GI packers (capable of sustaining a pressure of up to 10 kg/cm²) into the 12 mm diameter holes etc at points as directed by the engineer- in- charge .The ratio of propotioning chemical as per manufactures recomendation. The rate shall include the cost and conveyance of all materials, hire charges for pressure gun, all labours and materials etc. complete all as per the direction of Engineer-in-charge. |
| 26 | Providing and fixing stainless steel (grade 304) railing made of hollow tubes, channel, plates etc., including, welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on top of the floor or the side of the waist slab with suitable arrangement as per approval of Engineer – in charge. (For payment purpose, only weight of stainless steel members shall be considered excluding fixing accessories such as nuts & bolts) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
Today
Oct 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender