Tender For Tender For providing 11Kv Ht Line To Proposed 11/0.4 Kv 100 Kva S/Stn. Khunan-Ii, Providing 11/0.4 Kv 100 Kva S/Stn. Khunan-Ii And providing Lt Line From Proposed 11/0.4 Kv 100 Kva S/Stn. Khunan-Ii In (E ) Section Banjar Under Esd Banjar (
Tender Value
4.80 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
1 days left
EMD
4808
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For providing 11Kv Ht Line To Proposed 11/0.4 Kv 100 Kva S/Stn. Khunan-Ii, Providing 11/0.4 Kv 100 Kva S/Stn. Khunan-Ii And providing Lt Line From Proposed 11/0.4 Kv 100 Kva S/Stn. Khunan-Ii In (E ) Section Banjar Under Esd Banjar (T.S. 13,14 & 15/2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Supply part HT Line |
| 2 | Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any. |
| 3 | Supply of Anchoring Assemble for HT |
| 4 | Supply of Suspension Assemble for HT |
| 5 | Supply of Façade Hooks for HT |
| 6 | Supply of MS Angle Iron: 100x50x6, Length (1270mm x1 No.) Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 100x50x6 mm, suitable for fixing on Steel single pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality: |
| 7 | Supply of MS Angle Iron 50x50x6 mm Length (750 mm x2 No.) :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel single pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality: |
| 8 | Supply of MS Angle Iron 50x50x6 mmLength 1800 mm x 2No.): Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality: |
| 9 | Prov. X-Bracing Set - MS Angle Iron: 50x50x6, Length 2125 mm x 2No.)Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality: |
| 10 | Supply of MS Channel 100x50x6 mm Length (2340 mm x2 No.) Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality: |
| 11 | Prov. X-Bracing Set - MS Angle Iron: 50x50x6, Length 2800 mm x 1No.)Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality: |
| 12 | Supply of CI X-Arm (Horizontal) - MS Channel Iron: 75X40x6, Length (2800 mm x2 No.) for supporting GO switch and DO Fuse. Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality: |
| 13 | Supply of GO switch handle supporting CI X-Arm (Horizontal) - MS Channel Iron: 75X40x6, Length (460mm) Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality: |
| 14 | Prov. X-Bracing Set - MS Angle Iron: 50x50x6, Length 450 mm x 1No.)Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality: |
| 15 | Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. |
| 16 | Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) |
| 17 | Supply of Earthing set suitable for HT line/Earthing of metering unit made of GI pipe 40 mm dia (internal dia) wall thickness 3.25 mm medium quality pipe of standard make conforming to IS: specifications 2500 mm long with GI Socket closed at top pipe shall have holes of 12 mm dia every 150 mm apart throughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at top end of the pipe along with bolts and nuts size 50x12 mm and washers for fixing the clamp on the pipe. The bottom end of the pipe shall be tapered cut at 45 degree. |
| 18 | Supply of Galvanised Mild Steel wire conforming to ISS-280/1978/2006 (with up to date amendments ) for general engineering purpose, having fine finish, hot dip galvanised, with heavy coating of Zinc as per ISS-4826/1979 (2001-06)(latest) in soft condition and of size 4.06 mm (8 SWG) |
| 19 | Supply of x-arm for tapping structure (100x50x6 ),LT.600mm |
| 20 | Supply of Prov. Nee Bracing Set - MS Angle Iron: 65x65x6, Length 1100 mm x 1No.) |
| 21 | Supply of HT Stay Set complete |
| 22 | Stay Wire ( 7/ 3.15mm)( @ 10.0 kg Per Stay Set) |
| 23 | Prov. Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 24 | Prov.Danger Plate (250X200X1.6 mm) |
| 25 | Half Clamp |
| 26 | Full Clamp |
| 27 | Prov. Barbed Wire |
| 28 | Aluminium Paint |
| 29 | Material for GO Switch. |
| 30 | GO Switch 11 kV , 400 Amp , 25kA , Triple pole o/d type |
| 31 | DO Fuse unit |
| 32 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 33 | MS angle iron Length - 450 mm (50x50x6) mm (1 No.) for supporting GO switch and DO fuse |
| 34 | GO Switch handle supporting Channal Iron ( 75x40x6 mm), Length 460 mm. |
| 35 | Guide Clamp for GO rod |
| 36 | Erection of HT Cable |
| 37 | Erection of steel tubular pole 9 Mtr & 10.00 Mtr. Long (Single pole) digging of pit, Erection of pole, Drilling of holes in X-arm, , Fixing of insulator X-arm knee-bracing set top clamp, Fixing of barbed wire danger plate, Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial size with curing complete etc.) , Filling of pit+ramming, painting of pole and all steel items (Punching of the poles is stricitly not allowed) |
| 38 | Laying of AB Cable, Installation of Suspension and Tension assembly etc., Sagging of AB Cable & Heat Shrinkable Cable Jointing/Termination/Tojoint (1No.Straight Through +2 No. Cable termination & 1 No Jointing). |
| 39 | Erection of Stay Set HT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting) |
| 40 | Erection of Earthing set (Digging of pit, fixing of GI wire to the earth system & filling of pit) |
| 41 | Supply Part DTR 100 kva |
| 42 | Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any. |
| 43 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos for incomer line |
| 44 | MS angle Iron (50X50x6 mm), Length : 2800 mm x 1 Nos for LA |
| 45 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 46 | Transformer bed, belting & Knee Bracing |
| 47 | X-Arm Channel Iron (100x50x6mm),Length :2800mmx2Nos Transformer Bed |
| 48 | X-Arm Channel Iron (100x50x6mm),Length :460mmx2Nos supporting main channel Transformer |
| 49 | MS angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
| 50 | MS angle Iron (35X35x5 mm), Length : (460 mm) x 2 Nos |
| 51 | MS angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Nee Bracing |
| 52 | Transformer LT Distribution Box and GO Switch fixing Assembly |
| 53 | MS angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
| 54 | MS angle Iron (50X50x6 mm), Length : (450 mm) x 2 Nos |
| 55 | GO switch handle Supporting : (Channel iron (75x40x6 mm) , Length: 460mm. |
| 56 | GO switch unit (11kv, 400A, 25KA) Tripple pole O/D type. |
| 57 | D.O Fuse Unit |
| 58 | Surge Arrester, 9 kV Station Class (Porcelain Type) |
| 59 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
| 60 | Stay set complete |
| 61 | Stay Wire (7/3.15 mm) (7kg Per Stay Set) |
| 62 | Pipe Earthing Set |
| 63 | LT Distribution Panel Box with MCCB 160 amp 3P 35kA,ICS=100% ICU, KIT-KAT 200Amp.Supply of LT Distribution Panel Box suitable for 63KVA S/Stn of size 900x800x200mm +/- 5% made of steel sheet of 1.63 mm thickness having double door locking arrangement duly powder coated painted complete with MCCB Rating 160Amp, 3 Poles having following specifications (1) Minimum frame size 100Amp (2) Type variable trip free, (3) Breaking capacity- Isu & LCS at 415, 50 Hz (KA: not less than 50 KA) (4) , Thermal release range: 320-440Amp (5) Mecanical life (operation) 20000 No. (6) Electrical life (operation) 4000 No. (7) Rated insulation voltage (V) 690V (8) Tripping thermal releasing setting : Thermal-O/L variable setting (9) Tripping magnetic releasing setting : Magnetic- S/C fixed setting (12) in (10) (Operation) volatge 415V, AC (11) Caliberation temperature: 40 degree C (12) High voltage withstand voltage : 3KV for 1 minute (13) Confirming to IS : 1993/60947-2, 1989 (14) Make L&T/ Havells/ABB/ HPL/ Schiender (15) ICS : 100% ICU Reangular type aluminum alloy bus bar of 160 Amp. having length 800 mm of Phase 800 mm long for netural outgoing feeder 3 nos. outgoing feeders shall be made in the Pannel U type Single pole MCCBs of 160 Amp. shall be provided in all 3- phases. The panel shall be fully wired with insulated copper wire have adequate clearance . As per standard specification |
| 64 | Half Clamp (M.S. Flat 50x5 mm) |
| 65 | Full Clamp (M.S. Flat 50x5 mm) |
| 66 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 67 | Aluminium Thimble |
| 68 | Aluminium Thimble |
| 69 | Barbed wire |
| 70 | Danger Plate |
| 71 | Aluminium Paint. |
| 72 | Erection Part :-DTR |
| 73 | Erection of 100 KVA , 11/0.433KV DTR, complete viz digging of pit for poles & earthing (2 No. for pole & 3 no. for earthing), Drilling of holes in X arms & poles Prepration of plateform structure member CI, AI i.e. X-arm & Knee bracing set, Erection of Double Pole Structure, Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial size with curing complete etc.), Erection of plateform, Erection of x-arms, Erection of G.O. Switch, Erection of Drop-Out Fuse Unit, Erection of Lightning arrestor, Erection of LT Box, Providing Earthing connection including G.I.Wire to G.O Switch, Transformer, Lightning arrestor, etc , Erection of 4 Nos. Stay set , Erection of Jumper, Pipe Earthing 3 No. sets , Laying of LT Cable, Barbed wire & painting complete in all respect. |
| 74 | Manual Carriage from road to site of work of 63 Kva and its associate materia an avg. lead of =0.250 KM |
| 75 | Supply Part:- LT Line |
| 76 | Providing RCC Muff.with concreting. |
| 77 | Providing LT stay set |
| 78 | Prov. Stay Wire (7/4 mm) (6.0 Kg per stay set) |
| 79 | Prov. Nuts & Bolts |
| 80 | Prov. Earth Knob |
| 81 | Prov. Half clamps |
| 82 | Prov. Full clamps for stay set. |
| 83 | Pro. Barbed Wire |
| 84 | Prov. Aluminium paint. |
| 85 | Providing earthing set complete. |
| 86 | Prov. Earth wire (GI, 8 SWG) (Addl. 3 % (Sag & Wastage) ) @ 0.102 Kg/m |
| 87 | Prov. Nee Bracing Set - MS Angle Iron: 65x65x6, Length 1100 mm x 1No.) |
| 88 | Providing X-arm (Horizontal )-600x100x50x6. |
| 89 | Prov. Anchoring Assembly for LT |
| 90 | Prov. Suspension Assembly for LT |
| 91 | Prov. Façade Hook for LT |
| 92 | Erection Part:- LT Line |
| 93 | Erection of LT AB Cable (4x150+1x150+1x16mm2) Cable. |
| 94 | Erection of Stay Set LT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting) |
| 95 | Erection of steel tubular pole 9.00 mtr long (Single pole) digging of pit, Erection of pole, Drilling of holes in X-arm, , Fixing of insulator X-arm knee-bracing set top clamp, Fixing of barbed wire danger plate, Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial size with curing complete etc.) , Filling of pit+ramming, painting of pole and all steel items (Punching of the poles is stricitly not allowed) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender