Tender For special Repair And Roof Treatment Of Bldg P-101 (Jco Md Accn) At Robert Line
Tender Value
33.03 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
0 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair And Roof Treatment Of Bldg P-101 (Jco Md Accn) At Robert Line
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | M&L for Brickwork with subclass ‘B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius, built in 1:6 complete including demolition all as specified |
| 3 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. |
| 4 | M&L for 15 mm thick rendering in cement mortar 1:4 on on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specifeid |
| 5 | M &L 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work finished even and smooth complete all as specified |
| 6 | M&L for 10 mm thick rendering in cement mortar 1:3 on on fair faces of concrete surfaces finished even and smooth as in ceiling cement complete all as specifeid |
| 7 | M&L for preparation of wall and applying interior grade wall care putty 1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge. |
| 8 | M&L for preparation of wall and applying exterior grade wall care putty 1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge |
| 9 | M&L for Preparation of new surface of wall and applying two coat of oil bound distemper includind and over Priming plastered andother surfaces with alkali resistant priming paint complete all as specified and directed. |
| 10 | M&L for Preparation with complete removal of existing treatment of old surface of wall and applying two coat of oil bound distemper including and over Priming plastered andother surfaces with alkali resistant priming paint complete all as specified and directed. |
| 11 | Material & Labour for preperation of new plastered surface and applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete all as specified and directed. |
| 12 | Material & Labour for preperation with complete removal of existing treatment of old plastered surface and applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete all as specified and directed. |
| 13 | Taking down chowkat with shutter of any description (without taking of shutter from frame) n. exc 1.5 Sqm each complete all as specified and as directed . |
| 14 | ditto but exc,1.5 sqm & not exc. 4 sqm |
| 15 | M&L for Pressed steel frames size 105x60 mm for doors with one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed |
| 16 | M&L for Pressed steel frames size 165x60 mm for doors with one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed |
| 17 | Material and labour for 35mm thick IInd class hard wood Golder Teak plain fancy, framed panelled shutter machine made with panels of timber flat on both sides feather edged supplied and fitted to chowkats complete all as specified and directed. |
| 18 | S & F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed. |
| 19 | S&F stainless steel 304 grade wire 0.36 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed. |
| 20 | S&F 4 mm thick plain sheet glass,ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sqm in each pane and complete all as specified and directed. |
| 21 | M&L for preparation of new or previously untreated surfaces of wood over 10 cm width/girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified in SSR Part I and directed . |
| 22 | S&F Factory made 100% solid wood plastic composite ( WPC) door frame of size 70 mm x 40 mm mm made from wood plastic composite (single etruded process) material with density 750 kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specified and drawing complete all as specified and diercted by Engr-in-charge |
| 23 | S&F 30mm thick moulded WPC factory made 100 % solid ( conforming as per IS-4020) made from lead free single extruded with 2,4, or 6 raised panel design on the front side with 10 mm deep mould on single with grain texure and back side plain with density not less than 650 Kg/cum, Manufacturer by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardent and having screw holding capacity |
| 24 | S&F 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed . |
| 25 | S&F 150mm size solid in one piece stainless steel 202 grade bright finish barrel tower bolt 10 m dia shoot and fixed with stainless steel screws complete all as specified and directed |
| 26 | S&F 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed. |
| 27 | S&F stainless steel sliding door bolts SS 204 grade, hasp and staple type with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified |
| 28 | S&F Floor door stopper of Aluminium alloy body double spring and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed. |
| 29 | S&F factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle,steel peg stay,complete without glazing bars,dovetailed or welded complete |
| 30 | S&F factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle,steel peg stay,complete with glazing bars,dovetailed or welded complete |
| 31 | S&F windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 32 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth & complete all as specified |
| 33 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) water closet,including connection to trap and to flushing pipe,anti syphonage pipe etc and making good to floor complete all as specified and directed. |
| 34 | S&F AS IN REPAIR 10 ltr capacity PVC low level flushing cistern 'white' with inlet ,float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete. |
| 35 | Supply and fix in repair stainless steel grating 100 mm dia size complete all as specified and directed. |
| 36 | S&F in repair 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified |
| 37 | S&F in repair chromium plated stop valves/ angle valve/ concealed angle valve etc, cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified |
| 38 | S&F in repair 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specifed |
| 39 | S&F as in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. |
| 40 | S&F in repair glass corner shelf suitable size made of 5 mm thick toughened glass with CP railing complete all as specified and directed |
| 41 | S&F in repair 20mm dia brass chromium plated tubular towel rails fancy, D type, 60cm long between flanges, complete all as specified. |
| 42 | S&F in repairs CP brass Soap dish 6 inches size, complete all as specified and directed. |
| 43 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cementmortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 44 | Supply and fix in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and directed. |
| 45 | Supply and fix in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 46 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing and removing from site ,complete all as specified and directed. |
| 47 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for20 mm bore GI tubing and removing from site ,complete all as specified and directed. |
| 48 | S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing. |
| 49 | S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing. |
| 50 | S&F in repair 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve,gate valve with pvc ball complete all as specified |
| 51 | M & L 75mm th PCC 1:3:6 type C-2 as in plinth protection, finished even and fair complete all as specified. |
| 52 | S & F 75 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified. |
| 53 | S & F 110 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified. |
| 54 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 55 | M & L PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work ANDDEMOLITION complete. |
| 56 | M&L for 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding to edges and incl demolition of existing complete all as specified and as directed. |
| 57 | S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed as per approved sample . (Make-Vista or equivalent) |
| 58 | M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10 but not exc 20cm girth complete all as specified. |
| 59 | S & F Continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected. |
| 60 | S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 61 | S&F in factory made pre laminated WPC flush type shutter of 18mm (+ 0.5) thickness consisting of panel of 18mm (+0.7mm) thick celuka ply, of denistity 600 Kg per cum manufactured by ISO-9000 certified company, using for shutter celuka ply 18mm thick and fixed with frame, all four edges of shutters, using 13/6 size self tapping steel screws. The thickness of shutter is edges painted by matching colour of PVC lining of prelam coloured PVC sheet using etc, complete as per manufactue specification. |
| 62 | M&L for 25 mm thick cement concrete in 1:2:4 type B-1 ( 20 mm graded aggregate INCLUDING DEMOLITION complete all as specified and directed |
| 63 | M&L for Vitrified Ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing flooring complete all as specified |
| 64 | M&L for Vitrified Ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/ dado etc. over and including rendering/screed bed 10 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing flooring complete all as specified |
| 65 | M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. |
| 66 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including dismantling existing tiles with baking complete all as directed. |
| 67 | M&L for Machine cut kota stone slab flooring 20-25mm thick IN RISER OF STEP. SKIRTIMG, dado over 15 mm thick cement mortar 1:6 RENDEING laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing incl demolition complete all as specified and as directed. |
| 68 | M&L for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed. |
| 69 | Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed. |
| 70 | M&L for 100 mm thick cement concrete 1:4:8 type D2 40mm graded stone aggregate all as specified and directed |
| 71 | M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete. |
| 72 | M&L heavy duty anti skid parking coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. |
| 73 | M&L for taking out old treatment with plaster from existing RCC roof and cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing memberane, complete all as specified and described as under : (a) providing screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:3 over roof surface mixed finished fair and even with & including WPC as per manufacturers instructions. (b) Prepration of surface and applying one coat of polymeric primer @ 0.30 Kg/Sqm. (c) Supply & providing APP based polymeric water proofing membrane 3mm thick of weight not less than 3.60 Kg/Sqm reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) centre core including coating the surface with the compatible primer and torch application of membrane with 10cm overlaps as required there of, (d) applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm.complete all as specified and directed including dismantling/taking down of existing water tank and re-fixing in same podition.Note : The work of water proofing treatment shall be got executed through manufacturer or authorised applicator only. Note : The work will be carried out upto double storey builing the rate of scafolding is included for this item also. |
| 74 | Material and labour in repair for Soakage wells exc, in ordinary Soil, Foundation Each 24840.00 in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 2.4 M dia X 3.0M deep, complete all as specified and directed. |
| 75 | Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150mm bore set in cement mortar complete all as specified and directed. |
| 76 | M&L for PCC (1:4:8) type D-2 (using 20 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed. |
| 77 | S&F 150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and diirected |
| 78 | M&L 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface incl reinforcement and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including complete all as specified and as directed. |
| 79 | Excavating in trenches in any type of soil , n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete all as specified |
| 80 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engr-in-charge |
| 81 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified |
| 82 | S&F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls/chajja/ridge etc fixed with self tapping screws incl taking down existing as specified |
| 83 | S & F of rolled mild steel sections as in roof trusses (framed) trussed, purlins, crane gantries rails fastening and heavy brackets framing (beam TEE angle channel or flat sections ) includin distance pieces, cleats etc including cutting welding etc conforming to Fe -410-W (Gde E 250 ) quality B complete all as specified and directed. |
| 84 | Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Eng-in-charge. |
| 85 | M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with suitable size hylum sheet , one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge |
| 86 | (a) One light point point controlled by one-one way switch. |
| 87 | (b) One ceiling fan/ Exhaust fan point controlled by one-one way switch. |
| 88 | (c) One Bell point controlled by one-one way switch. |
| 89 | (d) One light point controlled by two way switch. |
| 90 | (e) One three pin 5 Amp socket on same board with other switches. |
| 91 | (f) One three pin 5 Amp socket on independent board |
| 92 | All as per item No 2 (d) above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm. |
| 93 | All as per item No 3 above but up to Sheet metal enclosure MCB DB with plug socket independent, with cable 4 Sq mm size, with earth continuity coductor of size 4 Sq mm. |
| 94 | S&F switch piano flush, button type 5 Amp SP 250 V AC complete all as specified & directed. |
| 95 | S&F switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed. |
| 96 | S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed. |
| 97 | S&F socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete al as specified. |
| 98 | S&F step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Amps 100 watts. |
| 99 | S&F Bell switch paino flush button type 5 Amp complete all as specified. |
| 100 | S&F switch paino flush button type 5 Amp SP 2 way complete 250 V AC all as specified and directed. |
| 101 | S&F Bell Multi Music type,250 volts,single phase .all as directed by engr-in-charge |
| 102 | S&F in replacement of sheet metal enclosure SPN with 3 pin earth metal plug and socket complete with one SPN MCB 20 Amps, 240 volts in repairs complete all as specified and directed by Engineer-in-Charge. |
| 103 | S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 220 V AC. |
| 104 | M&L sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sq.mm. (nominal area) drawing in and including 25 mm. dia or higher PVC concealed conduit heavy duty accessories and fittings. PVC insulated unsheathed FRLS cable copper conductor multistranded of size 4 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed, |
| 105 | S&F sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 8 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed |
| 106 | S&F sheet metal enclosures Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 200 Ams rated bus bar & one MCCB 100 Amp as incoming and 12 MCB SP as outgoing complete all as specified and directed |
| 107 | S&F MCB double pole 240 Volt 10 KA 40 Amp 'B' series conforming to ISI marked complete all as specified & directed |
| 108 | S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed |
| 109 | S&F MCCB 415 Volt 16 KA 4 pole 125 Amp adjustable type as incoming with fixing arrangement complete all as specified and directed. |
| 110 | S&F in replacement wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. |
| 111 | S&F in replacement mirror light 9/10 Watt LED tube light with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . |
| 112 | S&F Air ventilation fan made of sturdy Engineering plastic complete with louvers shutter, 250 mm, 1200 RPM, single phase, 230V AC including necessary, M&L for making hole fixing arrangement on wall with frame holdfastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cabl from ceiling rose to connector all a directed by Engineer-in-charge.Note: old unserviveable fan shall be deposite in E/M yard. |
| 113 | S&F in replacement of ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod , canopy, blades etc ,BLDC TYPE, 5 star rated including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan comlete all as specified and directed.( Note: Old unserviceable ceiling fan will be deposited in E/M store yard. ) |
| 114 | Supply and fix exhaust fan, steel body AC single Phase,heavy duty,copper winding. 230V of size 300mm, 900 RPM, single phase, 230V AC with louver all as specified . M&L for making hole fixing arrangement on wall with frame holdfastner, bolt, washer etcincluding connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector all a directed by Engineer-in-charge. |
| 115 | S&F in replacement of Geyser vertical mount type 25 Ltrs capacity five star rated , shockproof and rust proof metal body compact size including two nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall complete all as specified & directed . ( Note: old unserviceable Geyser will be deposited in E/ M store yard ) |
| 116 | S & F Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one 240 Volts 20 amp single pole MCB complete all as specrified & directed |
| 117 | Supply and Fixing Integral LED Bldg security Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed. including BKT & taking out old unserviceable street light. |
| 118 | Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) and as directed. |
| 119 | M&L for Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in soft/loose soil complete all as specified and directed. |
| 120 | M&L for Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed. |
| 121 | M&L for Removing of excavated soil to a distance n. exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 122 | M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed. |
| 123 | M&L for laying well burnt brick, old size in trenches, as protection of under ground cable complete all as specified and directed. |
| 124 | Supply, laying, jointing and testing of underground XLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 Core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size all as specified and directed. |
| 125 | Note : Tenderers may note that amount of credit Rs 35277.00 will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender