Tender For Dismantling &Replacement Toilet &Bath Room Floor Wooden Works, Providing Oil Bound Distempering , Painting Etc. Complete In S-I/167,S-I/145,S-I/362,S-I/367 And Providing And Fixing Self Adhesive Sbs Modified Bituminous Water Proofing Membr
Tender Value
4.04 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
6 days left
EMD
4415
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dismantling &Replacement Toilet &Bath Room Floor Wooden Works, Providing Oil Bound Distempering , Painting Etc. Complete In S-I/167,S-I/145,S-I/362,S-I/367 And Providing And Fixing Self Adhesive Sbs Modified Bituminous Water Proofing Membrane In S-1/163, S-1/167 And S-1/ 350 Quarter In Hpsebl Colony At Sunder Nagar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below |
| 2 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood |
| 3 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws, excludingpanelling which will be paid for separately, all complete as per direction ofEngineer-in-charge. (Note:- Butt hinges and necessary screws shall be paidseparately) Second class teak wood 35 mm thick shutters |
| 4 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer- in- charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding,including cutting fitting and grouting of 3mm wide joints with epoxy grout comrising 0.7kg organic coated filler approved shade mixed with 0.10 kg hardner and 0.20kg resin per kg including filling finishing and all incidental work and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarsesand) Acid and alkali resistant tile |
| 8 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 9 | Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture onwood work (hard and soft wood) |
| 10 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 11 | Painting wood work with Deluxe Multi Surface Paint of required shade. Twoor more coat applied @ 0.90 ltr/10 sqm over an under coat of primer [email protected] ltr/10 sqm of approved brand and manufacture |
| 12 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 13 | Providing and fixing uplasticised PVC connection pipe with brass unions :45cm long 15 mm nominal bore |
| 14 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore (Cera, Hindware or equivalent) |
| 15 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia |
| 16 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm |
| 17 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 18 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 19 | Providing and fixing self adhesive SBS modified bituminous water proofing membrane, 1.5 mm thick, over existing roof surface , inculding cleaning and preparation of existing surface laying membrane with reqired overlaps, seling of joints/laps and all necessary labour, complete as directed by engineer-in-charge.brand sika Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender