Tender For Provn Of Parking Shed For Omqs And Smqs, Provn Of Sign Boards And E/M Works At Certain Locations, Replacement Of Wooden Planks In Baffle Range And Certain Minor Works At Afs Yelahanka.
Tender Value
47.51 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
2 days left
EMD
95020
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Parking Shed For Omqs And Smqs, Provn Of Sign Boards And E/M Works At Certain Locations, Replacement Of Wooden Planks In Baffle Range And Certain Minor Works At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc,laid in 1.50mm spacer and grouted with epoxy joint filling material set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as directed and specified. |
| 3 | M&L Glazed coloured Ceramic tiles of size 450x300X7mm thick set and jointed in neat cement slurry incl matching PVC corner beading and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished all as specified and directed. |
| 4 | Taking down door chowkats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified. |
| 5 | S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including jointing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed. |
| 6 | S&F Powder coated Anodised aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats , glazing clips, rubber packing,handles 2 nos in each door, hinges, anodised aluminium snap beading, complete all as specified. |
| 7 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified. |
| 8 | S&F plain sheet glass ordinary quality 4mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as directed. |
| 9 | S&F Door closer hydraulically regulated, aluminium body, designation No. 3 universal type, suitable for door shutters upto 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified. |
| 10 | S & F Mortice lock, aluminium body, 4 lever, 150 mm size, vertical type with two keys complete all as specified. |
| 11 | S & F for aluminium powder coated drapery rod 32mm dia fixed with suitable bracket complete.(Note: Bracket will be measured and paid separately) complete all as specified and directed. |
| 12 | S & F aluminium powder coated fancy type suitable brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl neccesary drilling & finished with polishing Each opening shall have two fillets at both ends complete all as specified and directed. |
| 13 | Dismantling of old ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillet and frame work complete all as specified and directed. |
| 14 | S&F 605 x 605 mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminium angle & Tee arrangement with and incl fixing cleats screws including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 15 | S&F for 8mm thick E board (Non asbestos fibre) plain building boards fixed in Aluminium framework in ceiling flat or sloping with screws complete all as specified. |
| 16 | M&L for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper with smooth roller finish including priming, complete all as specified and directed. |
| 17 | Dismantling boarding any description fixed any position with nails complete all as specified and directed.Note : Works shall be carried out upto 15 Meter height. Rate including scaffolding and other necessary arrangements. |
| 18 | S&F of 2nd class soft wood 25mm thick clean sawn boarding with butt joints fixed with nails any situation (except flooring and skirting) complete all as specified and directed.Note : Works shall be carried out upto 15 Meter height. Rate including scaffolding and other necessary arrangements. |
| 19 | M&L in repairs 2nd class hardwood clean sawn as in scantling, etc fixing in position with nails, screw or glue etc. including dismantling complete all as specified and directed. |
| 20 | M&L for preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified and directed.Note : Works shall be carried out upto 15 Meter height. Rate including scaffolding and other necessary arrangements. |
| 21 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 22 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in hard/dense soil all as specified and as directed. |
| 23 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, Hard/ dense soil complete all as specified and directed. |
| 24 | Removing of surplus soil /excavated soil to a distance n.exc 50m and depositing where directed by the Engr-in-Charge at a level n.exc 1.50m above the starting point complete all as directed |
| 25 | Removing of excavated soil to a distance beyond 50m and upto 250m depositing where directed by the Engr-in-Charge at a level n.exc 1.50m above the starting point complete all as directed |
| 26 | M&L returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as directed |
| 27 | M&L for 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in hard standing complete all as directed. |
| 28 | M&L For Plain Cement concrete 1:3:6 type C-2 (Using 40mm graded stone agg) in foundations, filling and mass concrete post hole complete all as directed |
| 29 | M/L for precast cement concrete type B1 1:2:4 (20 mm graded aggregate) block masonry with solid blocks exc 10cm in width and setting in CM 1:6 complete all as directed |
| 30 | M&L Plain Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in Coping including earthing, rounded /chamfered angles and throating as directed including necessary form work and finishing all exposed surfaces of concrete even and smooth without using extra cement complete all as specified and as directed. |
| 31 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified. |
| 32 | M&L for Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming with alkali resistant priming paint etc complete all as specified and directed. |
| 33 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240, Complete all as specified. |
| 34 | M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted bolted or welded attachment conforming FE 410W (Grade E-250) Quality-A Complete all as specified. |
| 35 | S&F prepainted galvalume alu zinc coating based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fix with self tapping screws with necessary washers/welding all as specified and directed. (The profile of the sheet as specified and directed by Engr-in-Charge). |
| 36 | M&L for preparation of new steel surface of any description not other wise description over 10cm width applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome all as specified and directed. |
| 37 | S&F 3mm thick Aluminium composite panel cladding plain of approved colour/shade as in wall panelling/ceiling including facia of slab/beam/column/slab in circular/ rectangular shape, cutting, notching, bending to shape as required and jointing with silicon gel of approved colour, over and including aluminium square tubular hollow section 50 x 50 mm not exceeding 900 mm c/c and necessary arrangement to fixed to wall, ceiling, column beam /slab to hold ACP cladding etc complete all as specified and directed.Note : Colour / Pattern of ACP sheet shall be as directed by GE. |
| 38 | Providing and fixing illuminated signage board of size 1000 mm × 1000 mm, fabricated from SS 304 grade stainless steel, comprising laser-cut stainless steel letters/logo with satin/mirror finish, complete with LED illumination, acrylic diffuser, internal wiring, power supply/driver, and mounting frame. The side and backside of the signage shall be covered with ACP sheet. The unit shall be complete with all necessary fixing accessories and electrical connections, duly weatherproof and suitable for outdoor use, including fabrication, transportation, installation, testing, and commissioning complete all as specified and directed.Note: Logos, Pictures, Nos of letters, Design and Pattern of sign board shall be as directed by GE. |
| 39 | Returning filling in excavated soil upto a depth of 30 cm after riddling of excavated soil (in lieu of sand) for cushioning of cable and refilling of trenches with left over normal excavated soil including spreading, leveling, watering and well ramming in layers complete all as specified and as directed. |
| 40 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 41 | M&L for hard core of gauge not exceeding 63mm deposited, spread and levelled to a true surface complete all as specified and directed. |
| 42 | M & L Sand filling under floor or in foundations including watering and consolidation and all as specified and directed. |
| 43 | S & F machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 MM thickness, M 35 grade with grey cement and pigment complete all as specified and directed. |
| 44 | Providing and fixing galvanize iron(GI) expended meta mesh 0.90 mm thick ,securely fixed with GI screw/nails/clamps to the masonry wall over GI flashing at the junction of GI roofing sheet and masonry wall completely all as specified and directed. |
| 45 | Cutting out concrete blocks, brick work or stone masonry(in alternate course), forming tooth-ings for and bonding new work in mortar into old work, including new materials entering old wall except blocks or slab set in cement mortar 1:4 complete all as specified and directed. |
| 46 | Surface dressing n.exc (not exceeding) 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 47 | M&L For 75 mm thick Plain Cement concrete 1:3:6 type C-2 (Using 40mm graded stone aggregate) as sub base floor complete all as specified and directed. |
| 48 | S & F machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 MM thickness , M 35 grade with grey cement and pigment bedded and laid over and including 50 mm thick sand cushion compacted and joint filled as specified and directed. |
| 49 | M/L for precast cement concrete type C1, 1:3:6 (20 mm graded agg) block masonry with solid blocks exc 10cm in width and setting in CM 1:6 complete all as specified and directed. |
| 50 | M&L for Rendering 15mm thick CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed |
| 51 | M&L For 50 mm thick Plain Cement concrete 1:4:8 type C-2 (Using 40mm graded stone aggregate) as sub base floor(for brick work) complete all as specified and directed. |
| 52 | M&L for Reinforced concrete pipes of 100 mm dia of class NP2, laid and jointed with collars complete all as specified and directed. |
| 53 | M&L for plain cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 100 mm bore complete all as specified and directed. |
| 54 | S&F 100 mm Bends, laid and jointed, complete all as specified and directed |
| 55 | S&F PVC (SWR) 110mm bore pipes in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 56 | M&L for Point wiring one light controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. |
| 57 | All as per item No. 56 herein before but one switch socket outlet point 5 Amps on independent board. |
| 58 | All as per item No. 56 here-in-before but with copper conductor cable FRLS, 4.0 Sqmm for one 3 pin socket outlet, 15 Amps and including 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 59 | All as per item No.56 herein before but one ceiling/exhaust fan point controlled by one, one way switch. |
| 60 | All as per item No.56 herein before but one 05 Amps socket outlet point on same board. |
| 61 | S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed. |
| 62 | S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 63 | S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed. |
| 64 | S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed. |
| 65 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified. |
| 66 | M&L LED batten light fitting 20Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated life 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 67 | S&F LED luminaire 1x1 , 12 watt, 220 V AC recess type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 68 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recess type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 69 | M&L LED security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in all respect as specified and directed. |
| 70 | S&F 3 in 1 LED 4 ft batten 20 Watt (warm white, Neutral white, cool white), aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated life 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 71 | S&F LED batten light fitting 9 Watts 2 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 72 | S&F LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket of 42mm with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 73 | M&L for wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed. |
| 74 | M&L for LED batten light fitting 24 Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Please Enable Macros to View BoQ information |
| 75 | M&L for LED batten light fitting 24 Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender