Tender For As & As Adr Hangar Floor At installation Karna And Provision Of Acs For Various Offices And Administrative Accommodation At installation Kalinga, Visakhapatnam
Tender Value
48 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
12 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for As & As Adr Hangar Floor At installation Karna And Provision Of Acs For Various Offices And Administrative Accommodation At installation Kalinga, Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Racking out existing Bituminous Sealant from Expansion / Contraction [Dummy] Joints to a depth of at least 30mm, cleaning edges up to a depth of at least 15 mm by scrapping / grinding by mechanical means to expose the concrete surfaces and Cleaning the joints remove all Loose Dust, Dirt, Oil, Grease and Excessive Laitance by Vacuum Cleaning and Filling Joint with 25mm dia Closed Cell, Polyethylene Foam Backer Rods to achieve Width to Depth Ratio of 1:1 to 1½:1 before applying sealant to keep a clear depth of 10 mm from top of Flooring, Priming the Sealing Slot Surfaces with Adhesion Promoter [Sika Primer-3 of M/s. Sika India Pvt. Ltd. or its equivalent product of M/s. Fosroc Chemicals India [P] Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited] using a clean dry brush and Filling the prepared Joint with Single Component Polyurethane Elastic Sealant [Sikaflex Construction+ of M/s. Sika India Pvt. Ltd. or its equivalent product of M/s. Fosroc Chemicals India [P] Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited] between 30 to 120 minutes after Priming the Joint to a depth of 10 mm and up to the top of floor and removing the Masking Tape while Sealant is soft complete as per manufacturer’s instructions, all as specified and as directed. |
| 2 | M & L for applying Heavy Duty, Flow Applied 6 mm thick [Average] Epoxy Resin Floor Topping of approved Colour over a coat of Solvent Based Epoxy Resin Primer designed for maximum absorption and adhesion to concrete substrates on existing floor by using stiff brushes and/or rollers for primer and serrated trowels and spiked nylon rollers for finishing coat including preparation of existing flooring by cut opening all Construction Joints to a width of 15mm and to required depth, cut open all Anchor Grooves along floor topping termination points and all-round the columns, all cracks in the floor concrete including all other joints to a size of not less than 10mm X 10mm, preparing the surface of concrete substrate with scarification or by suitable mechanical means and cleaning the surface with Industrial Vacuum Cleaner to remove all foreign matter, dust and debris etc. including filling the cut open grooves with same material, finishing the surface to even and plain surface using suitable means to remove all imperfections, trowel marks and entrapped air complete all as specified as directed and as per manufacturer’s instructions. Heavy Duty, Flow Applied 6 mm thick [Average] Epoxy Resin Floor Topping shall consist of: |
| 3 | [a] Preparation of existing concrete flooring by removing Loose Concrete, Heavy Oil or Grease Deposits by Proprietary Chemical Degreaser including repair and cleaning of old concrete, Pressure Washing, including levelling and curing the surface, Grinding or Light Vacuum Contained Shot Blasting to expose the Coarse Aggregate, removing all loose debris and dirt by Vacuum Cleaning complete all as specified and as directed. |
| 4 | [b] Providing / Applying Moisture Barrier / Primer consisting of Three / Two Component Water Dispersed Epoxy Resin Primer [Sikafloor®-161/160 HC Primer of M/s. Sika India Pvt. Ltd. or Nitoprime 25 – Epoxy Penetrating Primer of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent product of M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited]. The coverage of material shall be @ 5.50 Sq.m / Litre. |
| 5 | [c] Followed by applying Three Component, Self Smoothing Underlay Screed [Sikafloor 82 Epocem of M/s. Sika India Pvt. Ltd. or Nitoflor EU5 of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent product of M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited] to a thickness of 4mm. The coverage of material shall be 3.75 Sq.m / 15 Litres for 4mm thick topping. |
| 6 | [d] Followed by applying Scratch Resistant, Resistant to Abrasion, Scratches, Chemical and other Physical Attack, Heavy Duty, Flow Applied, Self-Smoothing Four Component Epoxy-Cement Hybrid Floor Topping System with Cross Linked Polymer Technology [Sikafloor-263 HC of M/s. Sika India Pvt. Ltd. or Nitoflor SL7 HD of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent product of M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited] to a thickness of 2mm i.e. 0.5mm thick Primer / Scratch Coat and 1,5mm thick Floor Topping. The coverage of material shall be 18.00 Sq.m / 10 Litres for 0.5mm thick Primer / Scratch Coat and 6,50 Sq.m / 10 Litres for 1,5mm thick Floor Topping. |
| 7 | M & L for Levelling / Repairs to Surface Damages / Defects such as Damaged Joints, Honeycombing, Blowholes etc. in existing flooring by providing Three Component Solventless Epoxy Repair Mortar, mixed and spread to achieve required level and finish complete as per manufacturer’s instructions, all as specified and as directed. |
| 8 | M & L for applying Two Coats of painting with Two Component High Build Epoxy Coat of approved colour of 200 Microns thick, as in Lines, Dashes, Markings etc. of 100mm to 150mm Width over newly finished floor top surfaces, to obtain Glossy / Semi Glossy finish, applied by Brush or Roller complete as per manufacturer’s instructions, all as specified and as directed. |
| 9 | Note for Serial Item No. 1 to 4: The work shall be executed by the Authorised Applicator of the Manufacturer under the guidance of Manufacturer of Epoxy Flooring. The contractor shall submit necessary Certificate from the Manufacturer of Epoxy Flooring System that the entire materials have been supplied by them and that the work has been executed by their Authorised Applicator under their guidance before claiming any payment. The Physical and Chemical Properties shall be as per Manufacturers Data Sheet and shall conform to the appropriate Indian and International Standards. |
| 10 | Supply, install, testing and commissioning of 5 Star rated Hi-Wall Split type Air Conditioner [Indoor & Outdoor Units] with Cordless Remote Control Unit and with in-built advanced Air Filters for better indoor air quality with latest Inverter technology, having Eco friendly Refrigerant Gas, Copper Condenser Coil, EER 4.5 or above of Capacity 1.5 TR, Summer Cool, Inverter Compressor, Automatic 2D Swing Copper Condenser, BLDC Motor, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC Drain Pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable complete all as specified and as directed. Make: Blue Star / Hitachi / Daikin / Carrier / VoltasNote: The rate quoted by the contractor is deemed to include for Powder Coated Mild Steel Fixing Brackets for Outdoor and Indoor Units at any height and Copper tube of suitable size, Drain Pipe made of High Density Polyethylene Pipes [HDPE] of pressure rating 6 KGf / Sq.cm of 20mm dia as required and 3 Core, 4 Sq.mm, PVC Insulated and PVC sheathed, heavy duty cable, ISI marked with Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade as required for connecting indoor and outdoor units. |
| 11 | S & F SP & N Enclosure with 2 Pole and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 32 Amps, 240 Volts complete all as specified and as directed. |
| 12 | M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Casing and Capping with all accessories surface type / semi concealed type including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of PVC Casing and Capping will be measured as one unit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender