Tender For special Repair Of Bldg No T-1320 (Hrdc) & Tc - 1352 (Jco Club) Under Ge (East) Hisar At Hisar Mil Station
Tender Value
24.91 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
12 days left
EMD
49820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No T-1320 (Hrdc) & Tc - 1352 (Jco Club) Under Ge (East) Hisar At Hisar Mil Station
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling/granite including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises all as specified and directed. |
| 2 | Dismantling asbestos cement / GI (corrugated, semi corrugated etc) sheets in roof covering of any description complete. |
| 3 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall / as window chajja, fixed with shelf tapping screws as specified complete all as specified and directed. |
| 4 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 6 | S&F Rolled Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 stance ieces, cleats etc complete all as specified and directed. |
| 7 | S & F rolled mild steel sections angle/ tubular/ square/ rectangular confirming to Fe 410 - W as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 8 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including hangers an grid complete. |
| 9 | S&F GI powder caoted snap grid of sizes 605 mm x 605 mm frame work for false ceiling with main tee 32x24x1mm thick, cross tee 26x24x1mm thick and wall angle 24x24x1mm thick, flange covered with PVC thin sheet including gypsum board 7-9 mm thick, duly finished surface (thin PVC layer on gypsum board as per manufacturer instructions) size 600mm x 600mm and the same to be placed in snap grid as in false ceiling and Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 10 | M&L for glazed coloured ceramic tiles in vertical surfaces 450x300 6-7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on other then fair faces of brick work etc complete all as specified and directed. |
| 11 | M&L for 18 to 20 mm thick machine cut Kota stone (550 x 550 mm)flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified over and including 15mm thick screed bed in CM 1:6 complete complete all as specified and directed. |
| 12 | M&L Colured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 13 | M&L for mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 14 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectingular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete. |
| 15 | M & L for Chequered cement concrete tiles 25cm x 25cm x 25mm thick,set, jointed and pointed in neatcement slurry in floors with grey cement and pigments complete all as specified and directed. |
| 16 | M&L for Screed bed or bedding layer of mortar 15 mm thick in cm 1:6 for laying floor finishes complete all as specified and directed. |
| 17 | M & L granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:4 complete all specified and directed. |
| 18 | Dismantling of Stone/concrete slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 19 | M&L 75mm thick cement concerte type D2,1:4:8 (using 40mm graded aggregate) sub-base complete all as specified and directed. |
| 20 | M&Lfactory made machine pressed precast concrete rubber moulded coloured interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 Grade laid over and incl 25mm thick sand cushioning layer in floors/path/parking complete all as specified and as directed. |
| 21 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 22 | Demolition of Brick work, stone/boulder or block masonry, built in cement mortar excluding ashlars facing dressed stone work and pre-cast concrete etc complete all as specified. |
| 23 | M&L forBrickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates)complete all as specified and directed by Engr-in-Charge. |
| 25 | Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and directed. |
| 26 | S&F made single extruded WPC (Wood Polymer composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 27 | M&L for factory made single exturded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 28 | S&F Kitchen rack/shelf (Overall size not less than 36x36x10”) complete all as specified and directed. |
| 29 | S & F brass mortice lock verticle type size 65mm, 4 levers with escutcheon plates and two keys fixed in aluminium frame. |
| 30 | S&F in repairs door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Al die cast body) complete all as specified and directed. |
| 31 | S&F sheet glass 5.50 mm thick ordinary quality and glazing with oil putty in square/ rectangle n.exc 0.5 Sqm in each pane complete all as specified and as directed by Engr-in-Charge. |
| 32 | S&F, 3 mm sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each plane complete.all as specified and directed. |
| 33 | S&F powder coated aluminium deco grill made out of section size not less than 4mmx5mm, girth n exc 75 mm both ways fixed to powder coated windows and doors complete all as specified and directed. |
| 34 | S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (withsash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as directed. |
| 35 | S&F in repairs 20mm dia with 1.0 mm wall thickness curtain rod in any length, high strength stainless steel pipe including bracket/ finials as required complete all as specified and as directed. |
| 36 | S&F powder coating anodised aluminium extruded sections as in frame for doors, windows, ventillators, partions including joining cleat for fixing etc complete all as directed. |
| 37 | S&F anodised aluminium powder coated window and ventilator 3mm glass shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 38 | S&F 8 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed. |
| 39 | Taking down cement plaster of any description built in cement mortor complete all as specified and directed. |
| 40 | M&L 10mm thick cement plasters in CM 1:6 on concrete or brick wall surfaces finished even & smooth with out using extra cement |
| 41 | M&L for 15 mm rendering in two layers with 10 mm with CM 1:6 & 5 mm thick with CM (1:4) with using water proffing compound on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | Supply only Water Proofing Compound ISI Marked. |
| 43 | M&L for applying 3mm thick wall care putty on wall surface complete all as specified. |
| 44 | M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer as approved complete all as specified. |
| 45 | M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer complete all as specified. |
| 46 | M&L for preparation of old decorated wall surfaces of any description and applying one coat of oil emulsion distemper of any tint etc complete complete all as specified and directed by Engr-in-charge. |
| 47 | M&L for preparing old plastered or unplastered surface of walls and applying two coats of weather proof paint over a coat of paint base primer of same make with and including complete removal of existing treatment of any layer of wall complete all as specified and directed. |
| 48 | M&L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer. |
| 49 | M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 50 | M&L cement concrete in foundation filling and mass concrete 1:2:4 type B-2(using 40mm graded Agg) all as specified. |
| 51 | Dismantling water tanks, capacity exc 500 & n.exc 1000 ltrs complete all as specified and directed. |
| 52 | S&F 1000ltrs capacity rotational moulded polyethylene water storage triple layer white tanks (cylindrical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I including necessary fittings complete all as specified and directed. |
| 53 | Taking down GI Pipe any grade 15mm dia etc complete all as specified and directed. |
| 54 | Taking down GI Pipe any grade 20mm dia etc complete all as specified and directed. |
| 55 | S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 15mm all as complete all as specified and directed. |
| 56 | S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 20mm complete all as specified and directed. |
| 57 | S&F sink with drainage board made of stainless steel 1 mm thick with plug and washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackt and connacting union to pipe over all size 495 x 420 mm and bowl size 410x330x160 mm complete all as specified and directed. |
| 58 | Supply and fixing wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed. |
| 59 | S&F PVC connections 15mm size with PTMTnuts of length 450mm. |
| 60 | S&F in repairs stop valve 15mm dia cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 61 | S&F in repairs 15 mm dia chromium plated fancy type angle cock with wall flange consealed type of equivalent make specified here in after complete all as specified and directed. |
| 62 | S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to wall of size 110mm bore complete all as specified and as directed. |
| 63 | S&F in Repairs PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to wall of size 75mm bore complete all as specified and as directed. |
| 64 | S&F Grating doom 125 mm dia with waste holeof PTMT. (Minimum weight 40gms) |
| 65 | S&F Bib taps, 15 mm bore cast copper alloy withcrutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 66 | S&F hollow fluted pattern PVC Wall Lining (Panelling) consisting of min 5 to 7mm thick coloured or textured PVC sheet fixed to PVC fillet frame with screws inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing (including refixing of all fittings on the surface after the work). |
| 67 | S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 68 | Providing and fixing 35mm thick factory made moulded door shutter consisting of solid core single leaf flush door of 30mm thichness, lipped with 15mm (5mm x 30 thick x 30mm width on one stiles and top reails & bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2 raised panel design in different plain and 2mm plain coloured PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc incl all necessary fitting complete as per direction of Engr-in-Charge, manufacturer's specification and rawing. Make: Rahshri or equivalent as approved by GE. |
| 69 | S&F vitreous china (flat back) counter type wash basin of size 550 x 400 mm over granite slab of size 1.2m x 0.6m x 18mm thick, PVC Connection, waste coupling etc all as specified and directed by Engineer-in-Charge Make : Jaquar Cat Part No - \\"JDS-WHT-25901\\", Kohler Cat Part No - \\"K-5583IN-1WH-0\\" or equivalent as approved by GE. |
| 70 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size (P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed. |
| 71 | Supply & fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, connection to trap, flushing pipe & anti -syphonage pipe and flushing cistern 10 ltr capacity etc including necessary materials for fittings & making good to floor complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F tubular towel rail 20 mm dia 60cm long brass chromium plated fixed to wall with screws. |
| 73 | S&F 650 x 400 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and fixed to wall with wood plugs complete all as specified |
| 74 | S & F Stainless steel gate of grade 304 including all necessary fittings as per architectural drawing provided as per direction of Eng-in-charge. |
| 75 | Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed. |
| 76 | M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type pressed steel box covered with and including modular covered plated and frame all as specified & directed. |
| 77 | All as per item No. 76.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board. |
| 78 | All as per item No. 76.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board. |
| 79 | All as per srl item No. 76.00 (here-in-before) but for 15 Amp socket out let by using 2.50 sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed. |
| 80 | S&F modular type switch , single pole, one way, 5/6 Amp, 230 Volts all as specified & directed. |
| 81 | S&F modular type switch , single pole, one way, 15 Amp, 230 Volts complete all as specified and directed. |
| 82 | S&F modular type socket outlet multipurpose 5 Pin 5/6 Amp (with 2 pin outlet also) 230 volts AC complete all as specified and directed. |
| 83 | S&F modular type socket outlet multipurpose 5/6 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed. |
| 84 | S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. |
| 85 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 86 | S&F LED surface mounting panels 2 feet x 2 feet luminaire of capacity 36 watt suitable to be fixed in ceiling having extruded aluminium frame and super bright LEDs complete all as specified and directed. |
| 87 | S&F in repairs of security light 36 watt, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe of suitable dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed. |
| 88 | Supply and fixing ceiling fans (Copper winding) complete with blades, down rods and accessories, 230V, 1200mm sweep , min air delivery 210 CFM ,BEE five star rated with brushless direct current motor(BLDC) with remote complete all as specified and directed |
| 89 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, frame and louverscomplete all as specified and directed. |
| 90 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter ,voltage 230v, 50HZ, RPM 1200, copper winding of sweep 300mm complete all as specified and directed. |
| 91 | S&F down rod suitable for ceiling fans for extension from ceiling of 1 meter length complete all as specified and directed by Engr-in- Charge. |
| 92 | S&F in repairs of factory made epoxy polyester powder coated distribution board TP & N 4 way (TPN DB) double door (IP-43 protection) fabricated from minimum 2.0 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for TPN as incommer and outgoing MCBs as required at site complete all as specified and conforming to IS: 8623 along with cable end box complete all as specified and directed. NOTE :- (a) TPN and MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 93 | S&F Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) TPN of following poles and current carrying capacity in the DB complete with connection testing and commissioning of capacity 32 Amps complete all as specified and directed. |
| 94 | S&F in repair of MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed. |
| 95 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) including taking out old existing earthing complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender