Tender For Repair To Roof And Sunken Efflorescence And Grit Tiles Outside Building And Day To Day Maintenance At Map Area At 23 Fad And 223 Abod Suranussi Under Age (I) Suranussi
Tender Value
30 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
11 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Roof And Sunken Efflorescence And Grit Tiles Outside Building And Day To Day Maintenance At Map Area At 23 Fad And 223 Abod Suranussi Under Age (I) Suranussi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc incl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed |
| 2 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces on internal wall surfaces (CM 1:6) fair finished even and smooth without using extra cement using mixed with water proofing compoundNote : WPC shall be measured and paid separately. |
| 3 | M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling surface |
| 4 | M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified |
| 5 | Supply only Liquid water proofing compound complete all as specified and as directed by engineer-in-charge. |
| 6 | M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified |
| 7 | M&L for three coats of white wash on on ceiling on newly plastered surfaces |
| 8 | M & L perparation of old decorated plastered surfaces of wall and cornics by complete removal of existing treatment by applying water and scrapping of entire thickness of existing treatment with using steel scraper and thereafter applying applying two coat of oil bound distemper over and including 1 mm thick wall care putty to achieve smooth finish complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed |
| 10 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed |
| 11 | Taking down shutters of any description exc 1sqm each and not exc 2.00 sqm each complete all as specified and as directed |
| 12 | Taking down shutters of any description or any type area exc 1.00 Sqm and n.exc 2 sqm and refixing in same opening after necessary repairs/re size |
| 13 | S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed |
| 14 | S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed |
| 15 | Repair of Aumunium door/Window by taking down and refitting with same proper alignment including aluminum windows to restore their functionality, durability, repairing or replacing locks, handles, rollers, hinges, rubber beading and necessary screws etc and sealing gaps to prevent air and water leakage if required, be use quality materials and skilled workmanship to ensure long-lasting results all as specified and directed |
| 16 | S&F anodised aluminium frame powder coated with minimum thickness of powder coating 50 micron for doors, windows, ventilators, with one or more rebates including joining cleat for fixing, hinges etc. complete all as specified. complete all as specified and directed. Note:- Prelaminated partical board and sheet glass/wiremesh shall be measured and paid for separately. |
| 17 | S & F for Anodised aluminium window and ventilator shutters,Powder Coating (minimum thickness of powder coating 50 micron) sliding with three track channel section, aluminium sections weighing 0.55 kg/m including necessary joining cleats,hook and eye closure,Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site. |
| 19 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc brushing neat cement slurry with 3 kg of cement per Sqm |
| 20 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , over and including 15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge |
| 21 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , over and including 15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed |
| 22 | All as per item No 20 & 21 but in vertical surfaces dado/skirting including CM 1:3, 10mm thick backing coat. |
| 23 | M&L for glazed ceramic tiles coloured of size 450 mm x 350 mm x 7mm th on vertical surfaces such as in skirting, dado etc over and including 10 mm th backing coat in cm 1:4 complete all as specified and directed. |
| 24 | M&L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed or bedding layer in CM 1:4, incl round edges all as specified and directed by Engineer-in Charge |
| 25 | Rounding to edges of Granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 26 | M&L 18-20 mm th machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over and including 20 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge. |
| 27 | M & L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and inlcuding cementscreed bed 10 mm thick and jointed in CM 1:4 complete all as specified and directed by Engineer-in Charge. |
| 28 | Dismantling timber scantling 40 Sqcm and over section in fixed any position |
| 29 | S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints |
| 30 | S&F 18 mm thick BWR Grade HDHMR Board,(High Density High Moisture Resistance) exterior grade, cabinets wall tall units, shelves, shutters, drawer units, and necessary supports complete with approved quality soft close hinges, telescopic channels, handles, hardware fittings screws, adhesives and accessories required for complete installation for kitchen cabinet and fixed with screws including timber frame work complete all as specified and as directed by engineer-in-charge. Note : The item rate shall including cutting, fabrication assembly, transportation, loding/ unloding,fitting, alignment, and complete of work as per approved as directed by Engr-in- Charge |
| 31 | S&F 25 mm thick cupboard shutters made of approved quality BWR grade HDHMR board (High Density High Moisture Resistance) on internal surface, including 2 mm thick PVC edge banding on all exposed edges, complete with approved make soft-close hinges, handles, screws, buffers, necessary hardware fittings, cutting, fabrication, polishing/finishing, fitting and fixing in position as per approved of Engineer-in-Charge. Note : The item rate shall including cutting, fabrication assembly, transportation, loding/ unloding,fitting, alignment, and complete of work as per approved as directed by Engr-in- Charge |
| 32 | S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised |
| 33 | M&L 6mm thick teak wood lipping for external of any thickness of board |
| 34 | M&L 2nd Class soft Wood Moulding as in cornices/boaders,area exc 6 Sqcm but n.exc 13 Sqcm Over cup board Shutter fixed with screw all as Specified and directed by Engr-in-charge. |
| 35 | S&F 100mm Hasp & staple, safety type, Chromium Plated with mild steel hinges pin including bolt to hinges plate & fixed with screw |
| 36 | S&F 35 mm thick flush shutter solid core construction with block board core and plywood face commercial type on both sides complete all as specified and as directed |
| 37 | S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge. |
| 38 | S&F in repair plastic water closet seat Cover, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device |
| 39 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 40 | S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified |
| 41 | S&F extruded aluminium alloy handles,100mm fabricated type anodized complete all as specified and as directed by engineer-in-charge. |
| 42 | S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge. |
| 43 | S&F in repair mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 44 | S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge. |
| 45 | S&F in repair galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge. |
| 46 | Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads. |
| 47 | S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane |
| 48 | S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane |
| 49 | Taking down GI tubing and connections with all fittings 15 mm bore complete all as specified and as directed by engineer-in-charge. |
| 50 | Ditto all as per item No above but 20mm bore |
| 51 | M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 52 | S&F 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge. |
| 53 | S&F 20 mmdia GI tubing and connections fixed to wall or ceiling, laid in floor etc |
| 54 | Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge. |
| 55 | S&F Rotational moulded polythene water storage tanks Triple layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 complete all as specified and as directed |
| 56 | S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs. |
| 57 | S&F in repair 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs. |
| 58 | S&F in repairs vitreous china water closet Padestal pattern( white ) includng P or S trap but excluding fixing bolts, flushing cistern and flush pipe complete all as directed. |
| 59 | S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in repairs 600X450mm bevelled edge looking mirror of selected quality glass of 4mm thick etc mounted on AC board complete all as specified and directed by engineer-in-charge. |
| 61 | S&F in replacement 20 mm dia harrison rails Stainless steel, with fixing brackets , stops, knobs fixed with both ended, rollers complete all as specified and as directed |
| 62 | S&F kitchen plate rack made stainless steel 0.8mm thick complete of size not less than 775x600x250mm, duly assembled and fixed to wall with wall screws / fasterners all as specified and directed |
| 63 | S& F in repair vitrious china wash hand basin flat back 550X400mm incl fixing bracket, pvc waste coupling and waste pipe, match with good floor etc all as specified and directed by engineer-in-charge. |
| 64 | S & F in repairs 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 65 | S & F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge. Make: Cera/Prayag/Jaquar |
| 66 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge. |
| 67 | S&F in repair 15 mm bore dia bib tap (long body) chromium plated (CP) with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge. |
| 68 | S&F in repair 15 mm Angle stop valve cast copper alloy any colour high pressure screwed for iron pipe and fixed, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed. |
| 69 | S&F in repair Stop valves15 mm , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed.(Make- Jaguar, parko , Marc) |
| 70 | S&F in repairs 15mm fancy type chromium plated with long shank and cup concealed type angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed |
| 71 | S&F in repair sinks without board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste pipe and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified. |
| 72 | S & F in repairs 15 mm dia Brass CP Sink mixer for mixing hot & cold water screwed down for iron pipe and fixed |
| 73 | S &F in repairs 15 mm PVC waste pipe of standard pattern not less than 75cm long 32 mm/40mm dia for WHB/steel sink waste coupling or suitable size complet all as directed. |
| 74 | S&F in repair PVC shower rose PTMT 15mm size fixed to iron pipe complete all as specified and as directed by engineer-in-charge. |
| 75 | S&F in repair Towel rail 600mm long of SS fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) |
| 76 | M&L for preparation of old painted steel surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on steel surfaces in simple complete all as directed |
| 77 | M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces. |
| 78 | S&F in repair 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified |
| 79 | S&F in repair PVC SWR pipe 110 mm dia single socketed in any length with rubber ring joints fixed to walls etc all as specified |
| 80 | S&F PVC (SWR) bends 110mm bore |
| 81 | S&F PVC (SWR) bends with access door 110mm bore |
| 82 | S&F 110mm PVC (SWR) junction single (single T) equal or unequal |
| 83 | S&F in repair PVC SWR pipe 75 mm dia single socketed in any length with rubber ring joints fixed to walls etc all as specified |
| 84 | S&F PVC (SWR) bends 75mm bore |
| 85 | S&F PVC (SWR) bends with access door 75mm bore |
| 86 | S&F PVC (SWR) 75 mm branch piece, single (single Y) equal or unequal with acces door |
| 87 | Demolition of cement conc (un reinf) in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed |
| 88 | M&L PCC 25mm th 1:2:4 type B1 using 20 mm graded stone agg as in levelling course. |
| 89 | Taking down mild steel shutters of any description of size exceeding 1 sqm and n exc. 4 sqm but reflxing in the same opening after the following process : Repair, servicing, greasing and overhauling of MS shutter manual operated type of any size including shutter welded to holdfast, sliding bolt, hinges and cutting holes to wall for fixing of holdfast and making good dismateled portion of wall in cement concerte (1:2:4) type B-I making good the surfaces with CM (1:4) and Mild steel shutter make functional to the entire satisfaction of the Engineers in charge all as sepecified and directed by Engr-in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender