Tender For Renewal Of Floor Finishes, Replacement Of Tilling And Other Connected Works Of Sailors Md Accn At Sma Rameswaram Under Ge Fort Kochi
Tender Value
14.75 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
12 days left
EMD
29500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renewal Of Floor Finishes, Replacement Of Tilling And Other Connected Works Of Sailors Md Accn At Sma Rameswaram Under Ge Fort Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed. |
| 3 | Demolition of stone slabs and tiles of any description and thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and as directed. |
| 4 | Material and labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of floor etc, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 5 | Material and labour for coloured non-skid ceramic-coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 6 | Material and labour for coloured non-skid ceramic-coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 7 | Material and labour for coloured non-skid ceramic-coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 8 | Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces such as skirtings, dados and risers to steps etc including backing coat of 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces, complete all as specified and as directed. |
| 9 | Material and labour for Glazed ceramic-coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and as directed. |
| 10 | Material and labour for 16mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, and like in cement mortar (1:4) including pointing white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, set and jointed in neat cement slurry over 20mm thick screed bed in cement mortar 1:4 and pointed in white or coloured cement to match the shade including demolition of existing Granite complete all as specified and directed |
| 11 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 12 | Material and labour for making 3 mm grooves with cutting machine in floor/wall tiles, filling with epoxy joint filler MYKLAT KRETE SP 100 (Part A, B & C) or equivalent make including filling around floor trap to arrest seepage leakage complete all as specified and directed. |
| 13 | Taking down 20 to 25 mm bore UPVC / CPVC / PPR pipe and connections including cleaning for refixing or removal from site complete all as specified and as directed |
| 14 | Supply and fix of CPVC pipes 20mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary fittings/ joints complete all as specified and as directed. |
| 15 | Supply and fix CPVC reducer socket 50mm x 15/20 mm fitted to pipe on walls/ceiling or laying in floors complete all as specified and as directed. |
| 16 | Supply and fix CPVC brass adaptor socket one side threaded and other end pasting 50mm / male threaded fitted to pipe on walls/ ceiling or laying in floors complete all as specified and as directed. |
| 17 | Supply and fixing in repairs 75mm PVC (SWR) floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4), complete all as specified and as directed. |
| 18 | Supply and fixing in repair but 100mm PVC (SWR) nahani trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4), complete all as specified and as directed. |
| 19 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 20 | Material and labour for cement concrete, 1:5:10, type B-2, using 40mm graded stone aggregate as in filling under sunken floors complete all as specified and as directed. |
| 21 | Material and labour for 40 mm thick PCC 1:2:4, type B1, using 20 mm graded stone aggregate as padding concrete in Sunken floor finished even and smooth without using extra cement, complete all as specified and as directed. |
| 22 | Material and labour for apply two coats of brush bond of M/s Fosroc or equivalent all sides and bottom of sunken slab and providing 10 mm thick cement mortar 1:3 with water proofing liquid. Mix the part A and part B of the polymer modified cementitious coating mechanically using an electrically operated drilling machine fitted with mix paddle. Apply the same in two coats over the prepared surface one after the other dries up with a minimum interval of 4 hours between the coats. Providing pressure grouting in suspected areas of vertical and horizontal joints. The rate shall include all materials, machinery, labour etc. complete all as specified and as directed. Note: 10 Years Guarantee certificate to be submitted by Contractor |
| 23 | Supply and fixing in repairs, Health faucet (ABS body) with 1m long easy flex tube in chrome finish & wall hook complete all as specified and as directed. Make: Jaquar or equivalent approved make. |
| 24 | Supply and fixing in repairs chromium plated shower rose 125 mm dia with swivel joints including fixing to steel/ CPVC pipe or union, complete all as specified and as directed. |
| 25 | Supply and fixing in repairs cast copper alloy chromium plated bib taps 15mm bore fancy type, screwed down, screwed for iron pipe/ CPVC pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 26 | Supply and fix 2-way long body cast copper alloy CP bib cock quarter turn,15mm with wall flange complete all as specified and as directed. Make: Jaquar or equivalent approved make. |
| 27 | Supply and fix in repairs Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed complete all as specified and as directed. |
| 28 | Supply and fixing in repairs 15mm bore cast copper alloy chromium plated fancy type angle stop valve, single lever with wall flange complete, all as specified and as directed. Make: jaquar or equivalent approved make. |
| 29 | Supply and fixing in repairs, chromium plated single lever wall mixture with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges complete all as specified and directed. |
| 30 | Material and labour for minor plumbing work such as refixing of flushing cistern etc. or any other similar work including dismantling and refixing the same after repair and cleaning complete including material likes screws and rawal plugs complete all as per specified and as directed. |
| 31 | Material and labour for minor mason work such as joint filling, refixing of existing tile, plastering work area not exc 0.1Sqm each complete including material complete all as per specified and as directed. |
| 32 | Material and labour for minor mason work such as joint filling, around and inside floor/Nahani trap with white cement to arrest leakage seepage in below floor complete including application of chemical water proof treatment to below ceiling complete all as per specified and as directed. |
| 33 | Supply and fixing in repairs PTMT Floor trap grating doom/ jalli 100mm dia with square frame150x150mm complete all as specified and as directed. |
| 34 | Supply and fixing in repairs 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia complete all as specified and as directed. |
| 35 | Taking down chowkhat with shutter (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and as directed. |
| 36 | Taking down shutters of any description not exc 1 sqm and refixing after necessary repair complete all as specified and as directed. |
| 37 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm and refixing after necessary repair each, complete all as specified and as directed. |
| 38 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification and drawing, complete all as specified and as directed. |
| 39 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed. |
| 40 | Supply and fix butt hinges 100mm, medium weight, cold rolled and mild steel and fixed, complete all as specified and as directed. |
| 41 | Supply and fixing in repairs 150mm aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed. |
| 42 | Supply and fix 150mm aluminium handles, cast type, anodised, complete all as specified and as directed. |
| 43 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 44 | Material and labour for rendering 10mm thick in cement mortar 1:6 as backing coat without using extra cement complete all as specified and as directed. |
| 45 | Supply and fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white including 'P' or 'S' trap 100mm dia plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 46 | Supply and fixing in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm or nearest available size as approved, white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding, complete all as specified and as directed. |
| 47 | Supply and fixing in repair vitreous China wash basin, white, flat back, size 550x400mm or nearest available size as approved including fancy pillar taps 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, waste coupling, chain and plug and including brackets/ fixing with bolts etc. complete all as specified and as directed. |
| 48 | Supply and fix PVC connections 15mm size with PTMT nuts of length 600 mm long as specified and as directed. |
| 49 | Supply and fix 32mm bore bottle trap of PTMT having minimum water seal of 25mm (minimum weight 32mm-260 gms), and bore dia of discharge pipe 32mm, complete all as specified and as directed. |
| 50 | Supply and fixing in repairs tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges all as specified and as directed. |
| 51 | Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and as directed. |
| 52 | Supply and fixing in repairs 40mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 5gms/40mm-60 gms) suitable for kitchen sink, complete all as specified and as directed. |
| 53 | Supply and fix 32mm bore PVC flexible waste pipe suitable for wash basin/ kitchen sink, 90cm long, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender