Tender For Repairs To Plaster, Chajja, Parapets, Safety Railings And Allied Works In Various Md And Otm Accns At Sma (R) Under Ge Fort Kochi
Tender Value
13.75 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
6 days left
EMD
27500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Plaster, Chajja, Parapets, Safety Railings And Allied Works In Various Md And Otm Accns At Sma (R) Under Ge Fort Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 2 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 3 | Taking down chowkats with shutters (without taking off shutters from frames) area of opening exc 1.5 Sqm but not exc 4 sqm each complete all as specified and as directed. |
| 4 | Taking down chowkats with shutters (without taking off shutters from frames) area of opening not exc 1.5 Sqm each complete all as specified and as directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 6 | Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar, complete all as specified and as directed. |
| 7 | Dismantling Plain or corrugated steel sheeting, approved gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed. |
| 8 | Material and labour for pre-cast cement concrete block 1:2:4 Type B-1 (using 20mm graded stone aggregates) masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed. |
| 9 | Material and labour for precast cement concrete 1:3:6 type C-1 using 20 mm graded aggregate block solid building blocks or slabs in not exc 10cm thick (with plain or interlocking joints as directed) complete set in cement mortar 1:4, complete all as specified and as directed. |
| 10 | Material and labour for rendering 10mm thick in cement mortar 1:6 on other than fair face finished even & smooth without using extra cement complete all as specified and as directed. |
| 11 | Material and labour for rendering 8mm thick in cement mortar 1:4 using liquid WPC over 12mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & fair without using extra cement up to 4th storey complete all as specified and as directed. Note: Water proofing compound shall be paid separately. |
| 12 | `-Ditto- all as per item No 11 above but from 5th storey to 8th storey complete all as specified and as directed. |
| 13 | `-Ditto- all as per item No 11 but from 9th storey and above complete all as specified and as directed. |
| 14 | Supply only liquid water proofing compound complete, all as specified and as directed. |
| 15 | Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement as on ceiling complete all as specified and as directed. |
| 16 | Material and labour for preparing newly plastered surfaces of wall & applying two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resistant primer over one coat of wall care putty (minimum thickness 1mm) each complete all as specified and as directed. |
| 17 | Material and labour for Preparation of new plastered surface of wall and applying two coats of Antifungal Acrylic exterior emulsion paint over a coat of alkali resistant primer using rollers made from foam or synthetic fibres over two coats of external cement putty (minimum thickness 1 mm) each, to get a smooth and tint free surface, up to 4th storey height complete all as specified and as directed. |
| 18 | `-Ditto- all as per item No 17 but from 5th storey to 8th storey complete all as specified and as directed. |
| 19 | `-Ditto- all as per item No 17 but from 9th storey and above complete all as specified and as directed. |
| 20 | Material and labour for preparing newly plastered surfaces of ceiling & applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resistant primer over one coat of wall care putty (minimum thickness 1mm) each and complete all as specified and as directed. |
| 21 | Providing and fixing factory made UPVC white colour Sliding window Two track of area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutter) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] Notes : (a) The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 22 | Providing and fixing factory made uPVC white colour Sliding window Two track of area exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutter) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] Notes: (a) The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net opening will be measured for payment purpose. |
| 23 | Supply and fix Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 24 | Supply and fix Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, etc complete all as specified and as directed. |
| 25 | Supply and fixing Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Fe 410-W (Gde E-250) quality A (cut to ordinary lengths i.e. within 20mm of the length indicated), complete all as specified and as directed. |
| 26 | Supply and fixing pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed. |
| 27 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described applying with two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as specified and as directed. |
| 28 | Material and labour for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, and applying a coat of synthetic enamel paint complete all as specified and as directed. |
| 29 | Chip and remove all damaged and de bonded concrete and plaster from the RCC column, beam, flights, landing, railing and slabs by manually or mechanically height up to 15m so as to expose the corroded reinforcement bars including the rent of tools, scaffolding complete and labour charges for dumping the debris outside the MOD land complete all as specified and as directed. |
| 30 | Chip and remove all damaged and de bonded concrete and plaster from the RCC column, beam, flights, landing, railing and slabs by manually or mechanically height from 15m up to 32m so as to expose the corroded reinforcement bars including the rent of tools, scaffolding complete and labour charges for dumping the debris outside the MOD land complete all as specified and as directed. |
| 31 | Supply and application of rust remover/ converter over the corroded reinforcement bar wherever micro concreting / PMM is required (height up to 15m) and cleaning the same after application including the cost of all materials, rent of tools, scaffolding cost of brush etc complete all as specified and as directed. |
| 32 | Supply and application of rust remover/ converter over the corroded reinforcement bar wherever micro concreting/ PMM is required, height from 15m up to 32m and cleaning the same after application including the cost of all materials, rent of tools, scaffolding cost of brush etc complete all as specified and as directed. |
| 33 | Supply & application of Nitozinc Primer or equivalent over the exposed steel reinforcements after removing the rust scales from the exposed reinforcement rods in one square meter area (height up to 15m) including the cost of all materials rent of tools, scaffolding, cost of paint brush complete, all as specified and as directed. |
| 34 | Supply & application of Nitozinc Primer or equivalent over the exposed steel reinforcements after removing the rust scales from the exposed reinforcement rods in one square meter area (height from 15m up to 32m) including the cost of all materials rent of tools, scaffolding, cost of paint brush complete, all as specified and as directed. |
| 35 | Supply and application of Nitobond EP epoxy bonding agent or equivalent over the old concrete surface (height up to 15mtr) including the cost of all materials, rent of tools, scaffolding and cost of painting brushes etc complete all as specified and as directed. |
| 36 | Supply and application of Nitobond EP epoxy bonding agent or equivalent over the old concrete surface (height from 15m up to 32m) including the cost of all materials, rent of tools, scaffolding and cost of painting brushes etc complete all as specified and as directed. |
| 37 | Providing additional reinforcement bars in place of more than 1/3 corroded reinforcement bars including the charges for cutting, bending, placing and fixing in position using Lok-Fix or equivalent including the cost of all materials rent of all accessories and tools, scaffolding and supporting materials, labour charges including the cost of steel bars (height up to 15mtr) complete all as specified and as directed. |
| 38 | Providing additional reinforcement bars in place of more than 1/3 corroded reinforcement bars including the charges for cutting, bending, placing and fixing in position using Lok-Fix or equivalent including the cost of all materials rent of all accessories and tools, scaffolding and supporting materials, labour charges including the cost of steel bars (height from 15m up to 32m) complete all as specified and as directed. |
| 39 | Supply & provisioning Renderoc RG or equivalent to an average thickness of 60mm for beam and column, fluid micro concrete shall be mixed with 6mm down coarse aggregate and specified quantity of water and mixed using a power operated slow speed stirrer and pouring inside the form work including the cost of all materials, rent for tools, scaffolding, necessary water tight formwork shuttering and labour charges etc (height up to 15m) (Make: Renderoc or equivalent as per manufacturer instructions) complete all as specified and as directed. |
| 40 | Supply & provisioning Renderoc RG or equivalent to an average thickness of 60mm for beam and column, fluid micro concrete shall be mixed with 6mm down coarse aggregate and specified quantity of water and mixed using a power operated slow speed stirrer and pouring inside the form work including the cost of all materials, rent for tools, scaffolding, necessary water tight formwork shuttering and labour charges etc (height from 15m up to 32m) ( Make: Renderoc or equivalent as per manufacturer instructions) complete all as specified and as directed. |
| 41 | Material and labour for rendering repair mortar (using universal polymerised repair mortars) in layers of 15mm over tacky bond coat and subsequently built up the required thickness (up to 45mm) in subsequent layers of 15mm and finishing the final layer even on concrete surfaces finished even (height up to 15m) all as specified and as directed as per manufacturers instruction complete all as specified and as directed. Make: M/s Pidilite Industries Ltd or Equivalent in/ Asian paints/STP Ltd/Fosroc.Note: Application to be done by authorised applicators only. Rate of shuttering, scaffolding and formwork is included. Rate of bond coat to be paid separately. |
| 42 | Material and labour for rendering repair mortar (using universal polymerised repair mortars) in layers of 15mm over tacky bond coat and subsequently built up the required thickness (up to 45mm) in subsequent layers of 15mm and finishing the final layer even on concrete surfaces finished even (height from 15m up to 32m) all as specified and as directed as per manufacturers instruction complete all as specified and as directed. Make: M/s Pidilite Industries Ltd or Equivalent in/ Asian paints/STP Ltd/Fosroc. Note: Application to be done by authorised applicators only. Rate of shuttering, scaffolding and formwork is included. Rate of bond coat to be paid separately. |
| 43 | Material and labour for treating holes, cracks etc. up to 5mm by making \\"V\\" groove using patti blades and filling the cracks with ready to use crack fillers of approved make (Fosroc or equivalent) all as specified and allowed to dry, up to 4th storey height complete all as specified and as directed. |
| 44 | `Ditto- all as per item No 43 above here-in-above but work at 5th to 8th storey height. |
| 45 | Material and labour for treating holes, cracks etc. More than 5mm and up to 10mm, by making \\"V\\" groove using patti blades and filling the cracks with cement and sand aggregate mixture developed with polymer modified mortar (PMM) with suitable polymers like home shield crack fill paste, home shield advance latex plus and home shield cement mi plus (Berger make or equivalent) and allowed to dry, up to 4th storey height complete all as specified and as directed. |
| 46 | `Ditto- all as per item No 45 here-in-above but work at 5th to 8th storey height. |
| 47 | Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 65x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non- toxic additives (maximum toxicity index of 12 for 100 gm) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, SS Dash fastener of 150mm size 6 nos (3 no on each vertical face of frame) complete all as specified and as directed. |
| 48 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gm) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing, complete all as specified and as directed. |
| 49 | Material and labour for providing cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in hold fast bed block, filling in pressed steel frame, window cills complete as specified and as directed. |
| 50 | Supply and fix 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed |
| 51 | Supply and fix SS butt hinges125mm size medium weight in any position fixing with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. |
| 52 | Supply and fix 150mm aluminium handles, cast type, anodised door complete, all as specified and as directed. |
| 53 | Supply and fix SS Dash fastener 10mm dia of 150mm length, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender