Tender For Upkeep Of Outdoor Electric Substation And 11 Kv Power House Under Ge Hisar At Hisar Mil Station
Tender Value
20 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
13 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upkeep Of Outdoor Electric Substation And 11 Kv Power House Under Ge Hisar At Hisar Mil Station
BOQ
| Sl. No. | Item Description |
| 1 | M&L for construction of transformer plinth with PCC Block masonry platform of size 3m x 3m x 1.2 m hight, PCC(1:3:6) type C1 using 20mm graded stone aggregate built in CM 1:4 complete with and including necessary excavation & earth work, PCC 1:4:8 type D-2 as in foundation, rendering 15 mm thick in CM 1:6 on sides and top of the brick work, upto 300 mm below ground level, supply and fixing of 02 Nos MS Channels of size MC 100 for balancing of Transformer embedded in PCC (1:2:4) type B-1, top surface of plateform shall be provided with 100 mm Thick RCC (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 10 mm steel TMT bar, including provn of steps in one side of plateform and all the outer face of platform shall be given with two coat of white wash, complete all as specified and directed. |
| 2 | M&L for shifting of transformer from 2/4 pole structure to plinth/plinth to MES store, Isolating 11 KV HT supply from the substation and earth the complete system properly, disconnecting complete electric system of the transformer from HT and LT side including earthing strips, disconnecting removing taking down out door transformer of capacity upto 400 KVA from 2/4 pole structure and refixing, installing, commissioning & testing the transformer on plinth complete all as specified directed by Engineer -in-charge.Note:- (a) The rates quoted is deemed to be included for hydra, T&P and manpower and other items required for shifting of transformer. |
| 3 | Supplying and laying in replacement electrical insulation mat of size 5 mtr x 1 mtr x 2.5 mm thick specification as per IS 15652 2006 all as spefied and directed. |
| 4 | Taking out the old unserviceable HT Underground XLPE insulated, screened PVC bedded galvanized steel strip armoured electric power cable (heavy duty) with aluminium conductor 11 KV grade (Earthed) of any Size from trenches/wall/floor/road/ culverts or pole etc complete all as specified and directed . Note : Excavation and earth work, duct work, GI pipe for laying of cable and sand cushing/cable protection covers etc are beyond the scope of this item and shall be measured & paid for separately. |
| 5 | Supply, laying, testing and commissioning in replacement of HT underground XLPE insulated, screened PVC bedded galvanized steel strip armoured electric power cable (heavy duty) with aluminium conductor 11 KV grade (Earthed) of sizes 3 Core 95 Sqmm cable comfirming to IS-7098 Pt-II laid in trenches / walls / ducts / poles complete all as specified and directed. |
| 6 | All as per Item Sl No 5 above but size of cable 3 Core 120 Sqmm |
| 7 | Disconnecting and taking down HT UG cable from HT pole / Transformer and cutting faulty end portion of the cable, dressing properly and making good end termination, out door type fixed with and including suitable size of heat shrinkable new jointing kit 11000 voltage grade and aluminium lugs duly crimped with crimping tool for HT XLPE cable size 50 sqmm to 95 sqmm. |
| 8 | All as per Item Sl No 7 above but size of cable 120 Sqmm to 185 Sqmm 3 Core. |
| 9 | Disconnecting and taking down HT UG cable from HT pole / Transformer and cutting faulty end portion of the cable, dressing properly and making good end termination, indoor type fixed with and including suitable size of heat shrinkable new jointing kit 11000 voltage grade and aluminium lugs duly crimped with crimping tool for HT XLPE cable size 50 sqmm to 95 sqmm. |
| 10 | All as per Item Sl No 9 above but size of cable 120 Sqmm to 185 Sqmm 3 Core. |
| 11 | M&L in replacement for cable jointing Kit for 11KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable HT XLPE cable of size 50 sqmm to 95 sqmm. |
| 12 | All as per Item Sl No 11 above but size of cable 120 Sqmm to 185 Sqmm 3 Core Please Enable Macros to View BoQ information |
| 13 | All as per Item Sl No 11 above but size of cable 120 Sqmm to 185 Sqmm 3 Core Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender