Tender For Certain Misc Works Of Footpath, Interlocking Tiles, Drain, Fencing Etc Under Age B/R I At Ima Dehradun.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Misc Works Of Footpath, Interlocking Tiles, Drain, Fencing Etc Under Age B/R I At Ima Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width thermoplastic paint (Hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads and ermoving of existing old paint etc all as per manufacture instructions complete all as specified and directed. |
| 2 | Material and labour for preparation of old painted / decorated concrete surfaces/ PCC kerb stone/ plastred surfaces and applying one coat synthetic enamel paint , complete all specified and directed. |
| 3 | M&L for complete removal of existing treatment from concrete surfaces/ PCC kerb stone / plastred surfaces and applying two coat synthetic enamel paint over a one coat of primer , complete all specified and directed. |
| 4 | M & L, Precast Cement concrete 1:2:4 type B-1 in copings, roof kerbs or mud stops, rounded or chamfered on edges in parapets and railings, kneelers, apex stones, bed plates, kerb stone and the like including weathering, slightly rounded or chamfered angles and throating, set in CM 1:4 incl cement mortar and dismantling of damaged kerb stone and necessary earth work if reqoired as specified & directed . |
| 5 | M&L for two coats of synthtic enamel paint to concrete surface over a coat of primer incl preparation of new surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and direction. |
| 6 | Repair to potholes any depth and not exceeding 1 Sqm each incl sweeping ferrfrom dust nd mud or water scoring sunken surface of road cutting around edges and making good by Providing and supplying ready-made cold bituminous pothole patching mix, plant manufactured in accordance with IRC:116-2014, “Specifications for Readymade Bituminous Pothole Patching Mix Using Cut-Back Bitumen”, comprising clean, hard, durable and continuously graded crushed mineral aggregates uniformly coated with Medium Curing Cut-Back Bitumen MC-800 incl compection complete all as specified and direction. |
| 7 | S&F, in repairs, Solar road stud having 3 LED's of colours red/yellow/blue/green tough pressure dia casted aluminium alloy of size 125x125mm height 20mm fixing with epoxy, LED's solar cells battery & light sensor well protected in side under tough unbreakable poly carbonate transparent sheet roof system workable for 3-4 (nights) after full charge by Solar in 8-10hours including removal of old unserviceable stud, complete all as directed.Make: Shakti, 3M, Tata BP solar, Dark eye. |
| 8 | S&F, in repairs, cat eye's dual directional reflective of tough poly carbonate of retro reflective glass beads of colour white/red/yellow side provided with including removal of old unserviceable stud, complete all as directed. |
| 9 | S&F, in repairs, high intensity grade shedding retro reflective delinator post 75 mm outer dia, heavy duty steel pipe 1.2 m long head cap by hydraulic machine design and hold fast welded on delineator post bottom with one one coat of red oxide paint and two coats of stove enameled paint by heat process and three Nos reflective bands of white, red & yellow colour and covered by 14 gauge net grill and welded complete all as specified embedded in ground in 30x30x40cm deep pit (including excavation and removal of soil) filled with PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) and up to 30 cm high above ground level including necessary form work, two coats of cement base paint on concrete base, removal of old unserviceable delinator complete all as specified and directed. |
| 10 | S&F in repair solar road delinator 6 LEDs of colour red/yellow housed in plastic body, LEDs,solar cells,battery and light sensorwell procted inside,polycarbonate sheet,device protected with powder coated wire mesh,cage , system mounted over 47mm dia steel tube ,powder coated of length 600mm having sheet foot for firm grip to ground. delinators to have additional reflective bands. system workable for 2-3 days(nights)after full chargr for 8-10 hours. cat part no. GPL-13-01of GREENLITE PVT LTD. |
| 11 | Dismantling of existing delinator fixed in PCC block of any type size and embedded the in ground in 30x30x40cm deep pit (including excavation and removal of soil) filled with PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) and up to 10 cm high above ground level including necessary excvn incl removal of excavated and dismantaled material form work, two coats of cement base paint on concrete base, |
| 12 | M&L for Brick work with sub class 'B' bricks (Old size) straight or curved on plan exc 6.00m mean radius built in CM (1:4) incl demolition of existing brick work complete all as specified and directed |
| 13 | M&L for PCC 1:2:4 type B2 ( with 40 mm graded agrregate) in Surface channel or drains including necessary form works , stops ,moulds etc complete all as specified and as directed. |
| 14 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including necessary forms mould mitred /stopped ends etc |
| 15 | Taking down cement or cement lime plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 16 | M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and fair without using extra cement complete all as specified and directed. Note-water proofing compound shall be measured and paid separately. |
| 17 | M&L for two coats cement base paint on newly plastered surfaces including preparation of surfaces on external walls complete all as specified and directed. |
| 18 | M&L for 100 mm thick Cement concrete typeB-2, 1:2:4 using 40 mm graded crushed stone aggreates as in flooring even & smooth complete all as specified and directed complete all as specified and directed. |
| 19 | M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc complete all as specified and directed. |
| 20 | Demolition of cement concrete in ground floor and pavings n.exc. 15 cm thick below or above ground level. (un renforced) complete all as specified and directed. |
| 21 | M&L PCC 1:4:8 type D-2 (40 mm graded stone aggt) as in sub base filling and mass concrete complete finished evenand fair all as specified and directed. |
| 22 | M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed & PCC of any description and in any position complete all as specified and directed. |
| 23 | S&F Rubber moulded precast coloured concrete Interlocking paver blocks any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 30 mm thick sand cushioning layer including dismantling of existing interlocking tiles & PCC etc complete, all as specified and directed. |
| 24 | S&F Rubber moulded precast coloured concrete Interlocking paver blocks any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 30 mm thick sand cushioning layer including dismantling of existing interlocking tiles & PCC etc complete, all as specified and directed. |
| 25 | M&L for dismantling precast coloured concrete Interlocking paver blocks any shape and size and refixing the same over & including 30 mm thick sand cushioning layer complete, all as specified and directed. |
| 26 | M&L for heavy duty precast prepolished coloured cement concrete cobble stones paver block of size 100x100mm and 80 mm thickness of M-35 grade of fiber reinforced concrete (FRC) with approved colour, design and pattern, thickness & size / shape made by table vibratory method using rubber mould with strong vibratory compaction laid over 100mm thick PCC (1;4;8 type D-2), using 40 mm graded stone agg and 20 mm thick 1:4 Screed bed or bedding layer of mortar including dismantling of existing damaged flooring etc complete, all as specified and directed. |
| 27 | M&L for Preparation of old cement concrete interlocking paver block/chequered tile floor and similar flat concrete area on path, pedestal, hardstanding by brooming down or steel wire brushing, scrapping , removing grass roots in joints of paver block and cleaning all loose dirt & dust from the surface by fanning with air compressor and applying one coat of anti fungal apex paint of Asian paint or equivalent in berger, Nerolac paint as per original colour and pattern of tile, complete all as specified & directed. |
| 28 | M&L for complete removal / scrapping of existing treatment on wall / ceiling using machine scrubber etc upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge. Note:Rate shall be including scaffolding and other arrangement to reach height. |
| 29 | M&L for Preparation of newly/old plastered or scrapped surfaces of wall or ceiling and applying 1.5mm thick damp proof wall care putty in two coats as per manufacturer instruction complete all as specified and directed. Note : 1. Work shall be carried out upto a height of triple storied buildings. 2. Work shall be carried out with mechanical means. |
| 30 | M&L for one coat wall putty on wall / ceiling through normal applications to provide smooth surface complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge. Note : Rate shall be inclusive of scafolding and other arrangement to reach height. |
| 31 | M&L for preparation of existing old surface of any type and apply one coat of weather coat exterior emulsion on vertical as well as horizontal surface inlcuding brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorecence salts, trading oil, greasy spots vegitation, green fungus etc completed all as per manufacturer instruction. Note : Rate for working shall be inclusive of scafolding and other arrangement upto 25m height. |
| 32 | M&L for preparation of existing old surface of any type and apply two coats of weather coat exterior emulsion on vertical as well as horizontal surface inlcuding brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorecence salts, trading oil, greasy spots vegitation, green fungus etc completed all as per manufacturer instruction. Note :Rate for working shall be inclusive of scafolding and other arrangement upto 25m height. |
| 33 | M&L for preparation of existing old surface of any type of walls and applying one coat of oil emulsion distemper including 1mm putty complete all as specified. Note :Rate shall be inclusive of scafolding and for working other arrangement upto 25m height. |
| 34 | M&L for preparation of existing old surface of any type and of wall and applying two coats of oil emulsion distemper complete all as specified. Note :Rate for working shall be inclusive of scafolding and other arrangement upto 25m height. |
| 35 | M&L preparation of old distempered surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified. Note :Rate for working shall be inclusive of scafolding and other arrangement upto 25m height. |
| 36 | M&L for preparation of existing old surface of any type and apply one coat of cement base paint on vertical as well as horizontal surface inlcuding brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorecence salts, trading oil, greasy spots vegitation, green fungus etc completed all as per manufacturer instruction. Note :Rate for working shall be inclusive of scafolding and other arrangement upto 25m height. |
| 37 | M&L for preparation of existing old surface of any type and apply two coats of cement base paint on vertical as well as horizontal surface inlcuding brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorecence salts, trading oil, greasy spots vegitation, green fungus etc completed all as per manufacturer instruction. Note :Rate for working shall be inclusive of scafolding and other arrangement upto 25m height. |
| 38 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in , coping, benching, bed block, etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 39 | M&L 16 - 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed Cement Mortar (1:6) 15 mm thick colour of granite as approved all as specified and directed by Engr-in-Charge. Shade and colour of granite stone shall be approved by GE. |
| 40 | M&L fo coloured durastone vitrified ( non Skid) tiles 10 mm thick dark shad (Square or rectangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 41 | All as per item No 40 here in above but as in vertical surfaces over and incl 10 mm thich backing coat CM 1:4 complete all as directed. |
| 42 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed aggregate )as in flooring surface finished even and smooth without using extra cement to receive the topping layer complete all as specified and directed |
| 43 | M&L for preparation old metal sheet roof of any height by removing mildew, dirt and any loose flaps of old paint on roof surface and apply one coat of synthetic enamel paint by mechanical means of machine spray Complete all as per manufacturer Instruction and directed by Engr in Charge. Note : Rate for working shall be inclusive of scafolding and other arrangement upto 25m height. |
| 44 | Material and labour for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even and smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note : Rate for form work incl in the rate quoted by the contractor. |
| 45 | M&L for preparation of old painted steel surfaces exc. 10cm width or girth etc and applying one coat of synthetic enamel paint complete all as specified. |
| 46 | M&L for preparation of old painted steel surfaces not exc. 10cm width or girth etc and applying one coat of synthetic enamel paint complete all as specified. |
| 47 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 48 | S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified. |
| 49 | S&F Mild steel, plain, black sheet 1.60 mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc, with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required |
| 50 | S & F Mild steel galvnised sheet eaves gutters 1.25mm thick, 200 mmx200 mm size to match the existing eaves gutter with rounded edges incl dismantling of existing eaves gutter etc complete all as specified and directed. |
| 51 | S & F, in repair 150 mm bore PVC (SWR) pipe single socketed, in any length with rubber fixed to wall/vertical surfaces,complete all as specified and directed by Engineer-in-charge. |
| 52 | S&F in repairs PVC (SWR) bend 150 mm bore any radius complete all as specified and directed. |
| 53 | S&F stack and clamps out of 50mmx 5 mm Flat iron and 16 mm dia round iron stays incl bolt and nut and securing ends of stay to wall/ vertical MS member for 150 mm pipe complete all as specified and directed. |
| 54 | M&L for preparation of old painted wooden surfaces over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified. |
| 55 | M&L for Preparation of newly plastered or scrapped surfaces of wall or ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack seal and applying a coat of Dampstop Advanced of Berger or equivalenet of Sika/ Asian Paint/ Fosroc on saturated dry surface of wall as per manufacturer instruction complete all as specified and directed. Note : Work will be carried out upto a height of triple storied buildings. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender