Tender For Repair To Reinforced Cement Concrete Pipes, Hard Standing, Plinth Protection, Kerb Stone And Misc Wks For Aor Of Age B/R (West) Under Ge(West) Colaba, Mumbai.
Tender Value
1.50 Crore
Estimated cost
Bid Submission
24 Oct 2026
1 days left
EMD
2.25 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Reinforced Cement Concrete Pipes, Hard Standing, Plinth Protection, Kerb Stone And Misc Wks For Aor Of Age B/R (West) Under Ge(West) Colaba, Mumbai.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid, bedded and pointed in any mortar and removal of rubbish outside MoD land, complete all as specified and directed. |
| 2 | Demolition of cement concrete in ground floor and paving not exc 15cm thick (below or above ground level) and removed from site outside MoD land work etc, complete all as specified and directed. |
| 3 | Material and labour for 75mm PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection and all other similar works finishing the cement concrete surface even and smooth without using extra cement, complete all as specified and directed. |
| 4 | Material and labour for cement concrete type D-2, 1:4:8 (40 mm graded aggregate in foundations, filling and mass concrete, complete all as specified and directed. |
| 5 | Material and labour for providing precast cement concrete type B-1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 in road side kerb stones of any shape & size and all other similar works, complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B-1 (using 12.50 mm graded stone aggregate) as in coping , bed concrete and all other similar works including necessary formwork, complete all as specified and directed. |
| 7 | Material and labour for providing cement concrete type C-2 (1:3:6) 40 mm graded aggregate as in surface channels and drains finished even and smooth, complete all as specified and directed. |
| 8 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demoletion of any description and in any position not otherwise specifically provided for incl removing debris from MoD land, complete all as specified and directed. |
| 9 | M&L for RCC Type M-30 design mix (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like, and all other similar works, complete all as specified and directed. |
| 10 | M&L for RCC Type M-30 design mix (20mm graded aggregate) Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses and the like and all other similar works, complete all as specified and directed. |
| 11 | M&L for Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete, complete all as specified and directed. |
| 12 | M&L for Mild steel bars TMT 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete, complete all as specified and directed. |
| 13 | Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, complete all as specified and directed. |
| 14 | Formwork to faces of walls, retaining walls, abutments,parapets and staircase railingsand similar work includingattached pillasters, buttresses,etc.; vertical or to batter and similar work; not exceeding 200mm thick, complete all as specified and directed. |
| 15 | Material and labour for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in flooring and all other similar works, complete all as specified and directed. |
| 16 | Material and labour for crushed sand filling under precast interlocking paver blocks and all other similar works complete all as specified and directed. |
| 17 | M&L rubber moulded glossy finished 80 mm thickness precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of, M-40 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator, complete all as specified and directed.Note: Sand cushioning shall be paid separately under relevant item. |
| 18 | M & L for cement concrete tiles 25cm x 25cm, 20-22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, complete all as specified and directed. |
| 19 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in Cement mortar 1:6, complete all as specified and directed. |
| 20 | M&L for any coloured vitrified heavy duty outdoor anti skid tiles 14-16 mm thick (Square/rectangular) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and including 20 mm thick in cement plaster in CM (1:4) for fixing tiles, complete all as specified and directed. |
| 21 | M & L 18-20mm thick Granite (of any type) machine cut in, wall lining, steps, jambs, pillars, window cills, skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4), complete all as specified and directed. |
| 22 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 23 | Supplied and fixing of framed mild steel work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes , framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to FE 290 Gde -E-165, complete all as specified and directed. |
| 24 | S&F Rolled mild steel for joist, channel, angle, or tee sections, or MS Flats fixed independantly without connecting plates,etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 25 | S&F Rolled mild steel for joist, channel, angle, or tee sections, or MS Flats fixed independantly without connecting plates,etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender