Tender For Development Of Mugma Football Ground And Renovation With Boundary Wall At Ecl Mugma,Under Jmada Dhanbad
Tender Value
1.25 Crore
Estimated cost
Bid Submission
08 Oct 2026
11 days left
EMD
2.51 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Mugma Football Ground And Renovation With Boundary Wall At Ecl Mugma,Under Jmada Dhanbad
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 3 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 6 | Providing designation 75 B brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 7 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 8 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. |
| 9 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 10 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 11 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 12 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I. |
| 13 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M. including all lifts, levelling, ramming the foundation trenches removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. Extra for earthwork in hard soil as per specification & direction of E/I.(vide classification of soil item-B) |
| 14 | Reinfoced cement concrete work in beam,suspanded floor,roof having slope up to 15olandings,balconies,shelves,chajja,lintels,bands plain window sills,staircases and sprial stair cases above plinth level up to floor five level,excluding cost of centring,shuttring,finishing and reinforcements:1:1.5:3(1cement:1.5 coarse sand(zone-lll):3 grade stone agreegate 20mm nominal size)..........do…..all complete as per specification and direction of E/I. |
| 15 | Centring and shuttring including strutting,propping etc. and removal of from for Foundation, footings,bases of column,etc for mass concrete |
| 16 | Providing and laying factory made chamfered edge cement concrete paver blocks in footpath,parks lawns drive ways or light traffic parking etc,required strength ,thickness & size and shape ,made by table vibratory method……………do…….E/I.80MM thick c.c paver block of M-30 Grade with approved color design and pattern |
| 17 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 18 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 19 | filling in foundation trenches and plinth in layer …...do…..E/I |
| 20 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for. Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for. Suspended floors, roofs, landings, balconies and access platform |
| 23 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 24 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 25 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 26 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges. |
| 29 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 30 | Providing 12mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 31 | roviding 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. |
| 32 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 33 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. |
| 34 | Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and finally dressed with earth obtained from excavation of foundation trenches with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l. |
| 35 | Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.12 mm and above dia bar |
| 36 | Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I. |
| 37 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge |
| 38 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I. |
| 39 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 40 | K ) Supplying G.I. pipe ( Tata or equivalent make as per IS-1239 (partr-01) /2004 ISI marked /Medium quality. 15mm dia |
| 41 | 20mm dia |
| 42 | 25mm dia |
| 43 | Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.i)15mm dia |
| 44 | ii)20mm dia |
| 45 | iii)25mm dia |
| 46 | Laying of G.I. pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes to sizes and threading ends where necessary etc. all complete as per specification and direction or Engineer-in-Charge. 25mm dia |
| 47 | Supplying and fitting and fixing G.I. fittings of approved make ( Conforming to I.S. 1879 ) as per specification and direction of E/I.15 mm dia GI elbow |
| 48 | 20 mm dia GI elbow |
| 49 | 25 mm dia GI elbow |
| 50 | 15 mm GI union |
| 51 | 20 mm GI union |
| 52 | 25 mm GI union |
| 53 | 25 mmX20 mm Dia GI Reducing Socket |
| 54 | 20 mmX15 mm Dia GI Reducing Socket |
| 55 | 20 mm Dia GI Nipple . |
| 56 | 15 mm Dia GI Nipple |
| 57 | Providing and fixing gun metal full way valve of approved quality as per specification and direction of E/I. 25 mm dia and weight not less than 500gms |
| 58 | 15 mm dia and weight not less than 300gms |
| 59 | Providing and fixing C.P . brass bib cock of approved quality conforming to IS 8931 15 mm dia nominal Bore |
| 60 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:893118.52.1 15 mm nominal bore |
| 61 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other I.S.S.approved make with 100mm H.C.I. ‘p’ trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S.equivalent make, complete with all fittings,C.I. or C. C.brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification & direction of E/I.(B) 510 mm long(c) With 10 lit. low level PVC Cistem |
| 62 | Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification & direction of E/I.With \\"P\\" trap (b) 10 lit. low level PVC Cistem |
| 63 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification & direction of E/I. |
| 64 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. a ) Glass selves with C.P. brass rail.600x125 mm Glass selve complete. |
| 65 | (b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror.ii) 450x300 mm |
| 66 | (c) (i) C.P. brass towel rail 20mm x600mm with bracket container |
| 67 | ii) C.P. brass soap dish container medium quality with screw and hinges etc |
| 68 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. Cover with frame (weight not less than 36kg.) alongwith earth work in excavation and 80 mm thick P.C.C. (1:3:6) in oundation and refilling all complete as per specification & direction of E/I. |
| 69 | Supplying fitting and fixing H.C.I. pipes with ear of approved make confirming to I.S.I. 1729 including supplying nails and bobins short pieces, cutting loose collars,lead and yarn for making lead caulked joints, cutting pipes to size including earth work or scaffoldingwhere necessary etc. all complete as per specification and direction of E/I. 100mm Dia |
| 70 | 50mm DiaFor Urinal |
| 71 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S.1729 including supplying nails and bobines lead and yarn from I.S.S.1729 including supplying nails and bobines lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I. G) Bend with door and ear 100 mm dia ( wt 6.50kgs app) |
| 72 | 50 mm dia ( wt 4.00kgs app) |
| 73 | B) 100 mm heal rest bend ( wt 5.5 kgs app ) |
| 74 | K ) Norton patent HCI Cowel i) 100 mm dia ( Wt 3.25Kgs app. |
| 75 | Point wiring in PVC conduite with piano type switch wiring for light, point,fan point,exhaust fan point, call bell point with 1.5 sq mm F.R. PVC insulated copper conductor single core in surface recessed PVC conduite,piano type swich phenolic laminated sheet withsuitable size PVC/MS box etc as required. as per specification.Short Point |
| 76 | Medium Point |
| 77 | Wiring for circuite submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface recessed PVC conduit as required.2x2.5 Sq mm+1x2.5 sq mm earth wire |
| 78 | Supplying and fixing of following sizes of PVC conduit along with acessories in surface/recess including cutting the wall and making good the same in case of recessed conduite as required. 20 mm |
| 79 | Supplying & fixing following size of PVC/GI box on surface/recess with suitable. 6\\"X8\\" PVC Board |
| 80 | Supplying & fixing following modular type switch /socket on the switch box / cover including connection etc as required.5/6 amps one way switch |
| 81 | 3 pin 5/6 amps socket outlet |
| 82 | Supplying fitting & fixing 2 pin 5 amp ceiling rose on the existing junction box wooden block including connection etc as required. |
| 83 | Supplying fitting & fixing batten/angle holder including connection etc as required. |
| 84 | Supplying & fixing following way single pole and neutral sheet steel MCB distribution board 240 volts on surface /reces complete with tinned copper bus bar , neutral bus bar, earth bar inteconnection , powred panneled including earthing etc as required 2.8.2 -2 way single door |
| 85 | Supplying fitting & fixing 63 amp TPN main switch disconnector fuse unit pannel mounted / cubical type with ISI marked HRC fuses.button single holder as per direction. |
| 86 | Supplying fitting and fixing exhoust fan of size12\\" approved make including providing electric connection as per specification & direction of E/I. |
| 87 | Supplying & fixing LED mirror light of 10 watt of approved make as per direction of WE/I. |
| 88 | Providing designation 75B brick work in C.M (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 89 | Providing 12mm thick cement plaster (1:4) with neat cement punning with approved quality of clean coarse sand of FM 1.5 to the inside and outside surface in superstructure of plinth including screening, curing with all leads and lifts of water, scaffolding all complete as per building specification and direction of E/I. |
| 90 | Supplying & fixing C.I.man hole cover with frame of size 600mm x450 mm size weight 39 Kgs as per specification and direction of E/I. |
| 91 | Supplying all materials and labours for fixing 20 mm dia M.S. bar steps in septic tank at 0.30mt interval staggered in cement concrete (1:2:4 ) etc all complete as per specification and direction of E/I. |
| 92 | Supplying and stacking of good earth at site including royalty and carriageupto 5 km lead complete (earth measured in stacks will be reduced by20% for payment). |
| 93 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm cum 254.15 |
| 94 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment). |
| 95 | Fine dressing of the ground. |
| 96 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. |
| 97 | Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. |
| 98 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 60 cm dia, and 60 cm deep |
| 99 | Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 100 | Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 101 | Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 102 | Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge. |
| 103 | Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 104 | Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 105 | Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. |
| 106 | Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 107 | Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 108 | Providing and stacking of Michelia champa (Golden Champa) of height 90105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 109 | Providing and stacking of Pterospermum acerifolium (Kanak Champa) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 110 | Providing and Displaying Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy as per direction of the officer-in-charge. |
| 111 | Providing and stacking of Alternanthera species of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 112 | Dismentalling old plaster and pointing in cement including stacking the servicible materials within 15 m lead as per specification & direction of E/I. |
| 113 | Supplying, fitting and fixing of RCC chair…...........E/I |
| 114 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 115 | Providing 12mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 116 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.- |
| 117 | Supplying, fitting and fixing 38mm , thick good quality well dressed and well seasoned teak wood fully paneled shutter in doors and window with 25mm, thick panels with one side plain and other side chamfered with aluminium fittings such as hinges, sliding door, bolts, tower bolts, handled or rings, hooks and eyes, cleats, sand blocks as per schedule, taxes and royalty all complete as per building specification and direction of E/I. |
| 118 | 9 Mtr. Height octagonal hot dip glvanized pole(BOP- 9030) with top dia 70 mm, bottom dia 155 mm & made 0f 3 mm thick sheet ,base plat dimensions 250 X 250 X 16 mm(L X B X T) including suitable sizes foundatin bolt all complete as required(without arm) (Basic rate: Rs 14400 + Overhead &Profit @ 14.95% =Rs 16552.8) |
| 119 | 1.5 m Single Arm suitable for 70 mm Top. (Basic rate: Rs 1740 + Overhead &Profit @ 14.95% =Rs 2000.13) |
| 120 | S.I.TC of floowing rating LED street lighting luminarie with pressure dia cast housing and toughened glass cover(IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50 Hz.Luminaric shall be confirm to IS:10322 part-5/section-3 and shall be complete wth all neccssary accessories as required. 120W LED street light. |
| 121 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. 2 X 2.5 sq. mm |
| 122 | PVC/XLPE insulated PVC sheathed heavy duty, armoured electrical cable with aluminium conductor forworking voltage up to and includind 1100 volts.(Conforsto IS:1554,part-1)16 sq mm , 4 core (Basic rate: Rs 221 + Overhead &Profit @ 14.95% =Rs 254.04) |
| 123 | laying of one number PVC inulated and PVC sheathed/ XLPE power cable of 1.1 kV grtade of soze not exceeding 35sq mm direct in ground including excavation , g and refilling the trench etc as required but excluding sand cushioning and protective covering |
| 124 | Installation, Testing & commissioning of the 7 mtr, Octagonal poles & lights fitting with the help of suitable tools and plants, Wiring of luminaires with all materials and construction of shallow foundation with M25 grade concrete considering safe soil bearing capacity of 10T/mtrs sq (Basic rate: Rs 8100 + Overhead &Profit @ 14.95% =Rs 9310.95) |
| 125 | 80mm dia Earthing Electrode 2 mtr Length/ 80mm dia earthing electrodes 3 mtr. Length / 50 mm dia earthing electrode 2mtr length/50mm dia earthing 3mtr length & backfill compound chemicall 4 bag(per bag 25 KG) (Basic rate: Rs 6100 + Overhead &Profit @ 14.95% =Rs 7011.95) |
| 126 | S/L 6 SWG GI wire in ground :- Supplying and laying 6 SWG GI wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required |
| 127 | Outdoor stand mounted type Feeder panel housing 63A TPN MCB incomer, single dial timer, 63A contactor circuit for the automatic control of luminaries power tool control , incommer outgoing terminal etc asrequired. (Basic rate: Rs 27800 + Overhead &Profit @ 14.95% =Rs 31956.1 ) . |
| 128 | 6 to 32 amps. Rating MCB SPN C series 10 kva breaking capacity (Basic rate: Rs 350 + Overhead &Profit @ 14.95% =Rs 402.32 ) |
| 129 | Power Supply arrangement and monitoring System for a Highmast Light. |
| 130 | Amount 5 Year Warranty/Guarantee and comprehensive maintenance contract(CMC) of all above work release 3% every year with successfull maintenance. |
| 131 | Supply of 12 mtr. High Mast in one section Construction S355 grade as per BS-EN 10025 Top Dia 100mm, bottom dia 360mm, plate thickness 3mm, 12 side polygon galvanisation as per BS-EN ISO 1461, base plate dia 520mm, base plate thickness 25mm, GI single spike lighting protection, maximum wind speed 47 m/s as per IS:875(Part-III) with 6 nos. foundation bolt of PCD 445mm TS 600/24mm dia/850 mm long. Luminaires carriage:Material for 40 NB ERW Class B- M.S. Pipe, dia of carriage ring 450mm (ID) with 8 arm, welded, 2 sections having carrying capacity upto 8 luminaries. Trailing cable : 5 core 2.5 sqmm. PVC flexible copper conductor winch / Power Tool : Double drum, SWL 350 kg with 0.75 HP 6 pole single speed intergal motor Rope: Grade AISI 304, 7/19 construction, dia 5mm, BLC 1450 x 2 having 2 nos. of continues rope, Aviation obstruction light: twin dome aviation obstruction lights LED type as required. Feeder piller: control panel housing 32A TPN MCB incomer, single dial timer, 45A contactor circuit for the automatic control of luminaries power tool control , incommer outgoing terminal etc asrequired (For High Mast). (Basic Rate- 150500 + CP @ 14.95% =172999.75) |
| 132 | For 12 Mtr High Mast :ITC of High Mast and light fixture with the help of suitable tools and plants ,wiring of luminaries with all wiring material lights PVC insulated PVC sheathed Flexible cable of suitable copper conductor Lugs,MCB and all Lobour and construction of shallow foundation with M25 garade concrete for the Highmast considering safe Soil Beating capacity of 10T/mtr2 for 12 mtr Highmast (Basic Rate- 68990.00 + CP @ 14.95% =79340.00) |
| 133 | LED FLOOD Light 240 W(Basic Rate- 17053.00 + CP @ 14.95% =19602.42) |
| 134 | 25 sq.mm ,4 core PVC/XLPE insulated PVC sheathed heavy duty,armoured electrical cable with aluminum conductor forworking voltage up to and including 1100 volts.(Comformsto IS:1554,Part-1)(Basic Rate- 280.00 + CP @ 14.95% =321.86) |
| 135 | laying of one number PVC insulated and PVC sheathed / XLPE power cable 1.1 KV grade of size not exceeding 35 sqmm direct in ground including excavation sand Cushing protective covering and refilling the trench etc. as required |
| 136 | Earthing with GI earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 137 | Supplying and laying 6 SWG GI wire at 0.5 m below ground level for conductor earth electrode, including soldering etc. as required |
| 138 | Carrage of materials Cement (3 K.M.) |
| 139 | Sand (35 K.M.) |
| 140 | Stone Chips (15 K.M.) |
| 141 | Bricks (8 K.M.) |
| 142 | Steel (3 K.M.) |
| 143 | Earth 1K.M. |
| 144 | Goods & Services Tax (G.S.T.) - 18% |
| 145 | Labour Cess - 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender