Tender For Construction Of Cdpo Office Building At Jamankira In The District Of Sambalpur For The Year 2025-26
Tender Value
1.01 Crore
Estimated cost
Bid Submission
06 Oct 2026
3 days left
EMD
1.01 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Cdpo Office Building At Jamankira In The District Of Sambalpur For The Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in foundation hard soil including moorum, stoney earth mixed with boulders with all leads and lifts including dressing and levelling the bed and depositing the excavated earth away from the work site with all leads and lifts including cost of all labour and T&P and cess required for the work and etc. complete in all respect and as per the direction by the Engineer-in-charge. |
| 2 | Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 3 | Providing cement concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 4 | Flyash brick masonry in cement mortar (1:6) in foundation & plinth using Flyash bricks of 25x12x8cm size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 5 | Cement concrete of proportion (1:2:4) using 12mm size hard granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete and compacting in layers not exceeding 15cm thick with proper packing and ramming each layer of concrete by means of vibrator including watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 6 | Providing R.C.C work of M-25 grade with 20mm and down graded clean hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks,including centring, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty taxes of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position as per specification and direction of the Engineer-in-charge. Ground Floor Column Base |
| 7 | Plinth Beam |
| 8 | Column |
| 9 | Lintels |
| 10 | Chajja |
| 11 | Roof Slab |
| 12 | Precast Slabs/Lofts/Shelves |
| 13 | 1st Floor Column & Beams |
| 14 | 1st Floor Lintel |
| 15 | 1st Floor Chajja |
| 16 | 1st Floor Roof Slab |
| 17 | Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors(weight of binding wires will not be considered as measurement of M.S rods) as per specification and direction of the Engineer-in-charge. |
| 18 | 1st Floor |
| 19 | Fly ash brick masonry in cement mortar (1:6) in super structure using Flyash bricks of 23x11x8cm size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 20 | 1st Floor |
| 21 | 20mm th Cement plaster in C.M (1:6) finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 22 | 1st Floor |
| 23 | 16mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 24 | 1st Floor |
| 25 | 12mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 26 | 1st Floor |
| 27 | Providing fitting and fixing of false ceiling with aluminium anodised T section no. 3215 with 2' - 0\\" center to center, L section no. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2'- 0\\" x 2' - 0\\" suspended from ceiling using 12.5 mm th Gypsum board size 6' x 4' including cost, coveyance of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 28 | 1st Floor |
| 29 | Providing and fixing Vitrified tiles in floors, treads of steps and landing on 20mm th bed of cement mortar (1:4) (1 cement:4 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 30 | 1st Floor |
| 31 | Providing and fixing Chequred tiles in floors, treads of steps and landing on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 32 | 1st Floor |
| 33 | Providing and fixing Chequred tiles in dados, skirting and rises of steps on 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 34 | Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 35 | Wall painting two coats with plastic emulsion paint of approved shade over a coat of priming on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 36 | 1st Floor |
| 37 | Distempering two coats with approved shade, over a coat of priming with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 38 | 1st Floor |
| 39 | Finishing walls with water proofing cement paint (Weather coat) of approved shade on new work two coats, over a coat of priming, to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 40 | 1st Floor |
| 41 | Dressed seasoned Sal wood work framed and fixed (wrought and put up) in trusses, purlins, frames of doors and windows and beams etc with cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 42 | Providing 32mm piasal wood or local teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect, but excluding the cost of iron fittings with cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 43 | Providing 25mm thick piasal wood or local teak wood fully glazed shutter 25mm style complete with iron fittings and wooden hinged cleats, etc. fitted and fixed in position for doors and windows including all labour charges, but excluding the cost of glass panes and iron fittings with cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge (1St Floor) |
| 44 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality with frame, shutters and all fittings and fixtures etc complete including cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 45 | Supplying, fitting and fixing of FRP Door Frame (GRP) of 75mm x 100mm size of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 46 | Supplying, fitting and fixing of FRP Door Shutter (GRP) of 32mm thick of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 47 | Providing, fabricating, transporting and supplying at site of M.S Doors, Windows, Grills and shutters of approved design with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 48 | Labour for fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 49 | Painting two coats over a coat of primer with any approved paint with brush to wood/iron work including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 50 | 1st Floor |
| 51 | Providing, fabricating, transporting, hoisting of G.I. Pipes and placing in position etc. complete including all cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 52 | Providing, fabricating, transporting, hoisting of G.I. Pipes and placing in position etc. complete including all cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 53 | Providing, fitting and fixing of Tata Dura shine colour sheets (0.47mm thick) in roof including drilling holes in wind ties & fixing of ridges, vallies,wind ties etc. including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 54 | Providing & laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600mm with 40mm metal providing over the entire surface behind abutment, wing wall, return wall etc. with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 55 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by block making machine with proper compaction laid in required patten etc complete in all respect confirming to IRC SP-63-2018 including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 56 | Supplying and fixing of Pre cast Kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by block making machine with proper compaction fixed in required patten etc complete in all respect confirming to IS5758:1984 including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 57 | Providing rigid, smooth centring and shuttering including false works and dismantling them after casting including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 58 | Supplying fitting and fixing of Stain less steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr c/c and stain less square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 59 | EI WORK Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 60 | -do- (Gr.B) (1.1.2-1.24.2) |
| 61 | -do- (Gr.C) (1.1.3-1.24.2) |
| 62 | S/F of M.S. Box for 2 Module 18 swg |
| 63 | S/F of M.S. Box for 4 Module 18 swg |
| 64 | S/F of M.S. Box for 6 Module 18 swg |
| 65 | S/F of M.S. Box for 8 Module 18 swg |
| 66 | S/F of M.S. Box for12 Module 18 swg |
| 67 | S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4) |
| 68 | S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4) |
| 69 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 70 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent) |
| 71 | S/F of 15A Socket on 2 module for AC |
| 72 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 73 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 74 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 75 | -do- 4x10sqmm + 2 x 4 sqmm (1.8.11) |
| 76 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 77 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 78 | S/F 100A TPN Bus-Bar with all connection (Make:BENLO & Equivalent) |
| 79 | S/F OF 63A 4POLE MCB C-TYPE (Make:L&T/Equivalent |
| 80 | S/F of 32A rating \\"C\\" Series DP MCB (Make: L&T/Equivalent) |
| 81 | S/F of 4way( 4+12) TPN MCB DB Double door (2.5.5) |
| 82 | S/F of MCB 8 Way Double Door (2.3.1) |
| 83 | Provn. of 3 1/2 x 35 sqmm Armoured Cable with all connections(25) |
| 84 | Laying of MV cable above 25sqmm to 120 sqmm in ground(5.1.2) |
| 85 | S/M of end termination of 31/2 X 35 (5.8.21) |
| 86 | S/F of 63A Wall Mounted Pannel board (36\\"x33\\"x10\\") .1). 63a 4P 25KA MCCB-01NO. Icu-100% Ics (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) with spreader, rotary handle and UV relaease 2)63a Manual change over -01(Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) with Aux Contact Kit, Operating handle kit and out put shorting link. Spreader Link-01 No. 3) 63a 4P AC 10K C-Curve MCB-03 (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 4) 40A C-Curve DP DP MCB-03 (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 5) SPD type 1+2,50ka 3P+N-01NO. (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 6) INSTRUMENT- (i) 3 numbers phase indicating lamp with toggle switch and HRC Fuse-2 SET. 7) (i) 02 SET of digital type multification meter with CT for voltage ,current, Freqency, PF,,THD Indication with RS 485 COMPACTIVITY for bms data. 100A Ext. 8) 100A/5 CTS-6 9) 100A BUSBAR-4.1KG with all materials. |
| 87 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 88 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2+3.3) |
| 89 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 90 | S/F of Fan hook S, Type on ceiling. |
| 91 | S/F of step type modular fan regulator |
| 92 | S/F of 12 Watt. LED bulb. |
| 93 | S/F of 300 exhaust fan with all accessories and connections(Make-Usha-Aero Clean plus DBB/Polycab-Fress on DBB/Cromton-Trans Air12\\" reversible/Havells-Ventil Air DS(HS)/Ancor-Anmol DelusR/Orient-Power Flow DBB |
| 94 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 95 | S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 96 | S/F of 18 Watt Ceiling Light Recessed Mount or Surface Mount(Round or Square )Type(Make Havells/Crompton/Polycab or Equivalent) |
| 97 | S/F of 1.5T 3Star split type AC Machine, Make-Carrier /Blue Star /Hitachi |
| 98 | S/F of Voltage Stabilizer(110-300V) Upto 1.5Ton AC, Make-Microtech/V-Guard |
| 99 | S/F OF 1400VA/12v Invertor with 1no 180Ah Battery including Trally arrangement. (Luminous/Microtek/Excide) |
| 100 | Supply & Fixing of 60Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 101 | PH WORKSupplying all materials,labour,T&P and fitting & fixing of 4.0kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.110mm dia.U-PVC SWR pipes |
| 102 | 110mm dia.U-PVC P-trap |
| 103 | 110mm dia.U-PVC SWR Single junction door |
| 104 | 110mm dia.U-PVC SWR door bend |
| 105 | 110mm dia.U-PVC SWR Offset |
| 106 | 110mm dia.U-PVC SWR plain bend |
| 107 | 110mm dia.U-PVC SWR Plain Tee |
| 108 | 110mm dia.U-PVC SWR vent cowl |
| 109 | 125mm dia CP greatings |
| 110 | Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking HCI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C. 375mm thick wall |
| 111 | 250mm thick wall |
| 112 | Roof cutting |
| 113 | Supplying all materials,labour,T&P and fixing water closet,squatting pan(Indian type WC pan/Orissa pattern squatting pan)duly embedded in cc(1:5:10)using 4cm size hard granite metal including fixing a pair of vitreous china 250mmx130mmx30mm footrest etc all complete as per specification and direction of the E.I.C.(a)580mm size Orissa pan (Nycer/ Cera/ Hindware/ Parryware) |
| 114 | Supplying all materials,labour,T&P and fixing wash down water closet(EWC)with integral 'S' or 'P' trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. |
| 115 | Supplying all materials,labour,T&P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. |
| 116 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with CI or MS brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.(a)550mmx400mm size WHBwith 32mm dia CP west,west pipe and brackets.(Neycer/Parrywear/Cerra/Hindware) |
| 117 | Supplying all materials, labour T&P and fixing Pedestal for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C.(Neycer/ Parry wear/Cerra/Hindware) |
| 118 | Supplying all materials,labour,T&P and fixing wash laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.(a)600mmx450mmx250mm Porcelean sink with 40mm dia CP west,west pipe and brackets. |
| 119 | Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C. (a)CP Soap holder |
| 120 | Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. (a)600mmx450mm B.E.Mirror |
| 121 | Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.(a)(125x600)mm size glass-shelf with CP Guard rail |
| 122 | (b)Wall Mounted Grab Bar 600mm long |
| 123 | Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C. (a)25mmx600mm long CP towel rail |
| 124 | (b)CP Towel Ring |
| 125 | Supplying all materials,labour T&P and fitting and fixing 10 Ltrs capacity PVC LL flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.(a)10 lit PVC L/L Cistern(Parry ware) |
| 126 | Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3) with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size hg chips with RCC manhole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(a)Inside size 760mm x 760mm x 460mm |
| 127 | Supplying all materials labour T&P and constructing manhole chamber of the following sizes with cc(1: 3:6)using 40mm size hg metal on bed,1st class KB brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chip,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC coverslab in cc(1:1.5:3)using 12mm size hg chips with RCC manhole cover,ew in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(a)Inside size 910mm x 910mm x 910mm |
| 128 | Supplying all materials,labour,T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches(to slope or level)and jointing with supply of approved solvent cement by non-heat application method cc(1:3:6)using 40mm size HG metal on bed of the trenches and all round concrete encashing with cc(1:4:8)using 40mm size HG metal,earthwork in excavation in trenches in all kinds of soil refilling the same in a layer of 0.30mtr with watering ramming and removing of surplus earth testing the SW pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. 160mm dia PVC pipe with allround encasing(a)160mm dia PVC pipe with allround encasing |
| 129 | Supplying all materials,labour,T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside and outside over masonry brickwork gravel packing in the rear of well steining, RCC cover slab in cc(1:1.5:3)using 12mm HG chips,fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works,watering,curing,conveyance of all materials to work site,payment of royalty,taxes etc all complete as per approved specification and direction of the E.I.C.(a)Soak way Pit 1.20m dia x 2.00m Deep |
| 130 | Factory made FRP(alternately called GRP)doorframe of size 75mmx100mm fabricated using E-glass chopped strand mat(CSM)UV stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin.The thick ness of the GRP skins shall not be less than 2.00mm.The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould.The segments are plugged in and are joined together by means of screw.The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement,Six numbers of 260mmx25mmx 5mm size 'S' shaped MS flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications.The finish of door frame will be plain colour white/Ivory/Beige/Light grey/Golden brown/ Mahogany/Teak wood/ sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C. 9x(0.75m+2.10m+2.10m)=44.550mtr2x(1.20m+2.10m+2.10m)=10.800m |
| 131 | Factory made single leaf rigid FRP(alternately called GRP)sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450gsm E-glass Chopped Strand Mat(CSM)impregnated with orthopthalic palyester resin.The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickn ess and a density of 20kg/cu.mtr shall be used as core material. wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fitting the metal fittings such as tower bolts,aldrops, handles etc shall be provided.A structural adhesive compatible with(EPS)foam shall be used for bending the core material,the salwood reiforcements and the skins.the material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998.The finish of door shutter will be plain colour white/Ivory/Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. 9x0.75mx2.10m=14.175sqm2x1.20mx2.10m=5.040sqm |
| 132 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in floors,on 25mm thick bed of cm(1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. |
| 133 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3)joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C. |
| 134 | Earthwork in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E.I.C. (a)Initial lift up to 1.50m |
| 135 | (b)From 1.5m to 3.00m depth |
| 136 | Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of E.I.C. |
| 137 | Supplying all materials,labour,T&P and providing cc(1:3:6) with 4cm size HG metal including watering, curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per specification and direction of the E.I.C. |
| 138 | Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HG chips including watering, curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 139 | Supplying all materials labour T&P and providing brickwork with KB Brickwork in cm(1:4)F&P having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8% including watering,curing conveyance all materials to work site payment of royality taxes etc. all complete as per specification direction of E.I.C. |
| 140 | Supplying all materials,labour,T&P and providing 12mm thick CP in cm(1:3)on brick/stone work including watering,curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 141 | Supplying all materials labour T&P and providing cement punning for skirting including watering,curing, conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 142 | Supplying all materials labour T&P and providing rigid and smooth centering & shuttering for RCC works including falsework and dismantling them after casting including conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 143 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20gauge, conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 144 | Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 145 | Supplying all materials labour T&P and fixing MS step iron in 12mm dia MS steel bar and fixing into walls of septic tank dulyembedded in cc(1:3:6)all complete as per PH. specification and direction E.I.C. |
| 146 | Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 147 | Supplying all materials,labour,T&P and providing 160mm dia PVC Tee inside the septic tank including cutting holes and duly embeded in cc(1:1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 148 | Supplying all materials labour T&P and Providing cement flush pointing(1:3) to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 149 | Supplying all materials,labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 150 | Supplying all materials,labour,T&P and construction of masonry staging with providing 1st class KB brick work in cm(1:6)of 0.46mtr height in staging,12mm CP in cm(1:6),RCC Beam of 0.25mx0.30mx2.60m in cc(1:1.5:3)using 12mm size HG chips including centering,shuttering,bending and binding of rod etc watering,curring,conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.(a)Stagging for 2000ltr. Storage Tank (1st Floor) |
| 151 | Supplying all material,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to IS:15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above GL & placing the tank in required position including conveyance of all materials to worksite,payment of royalty, taxes etc all complete as per PH specification and direction of the E.I.C.(a)Stagging for 2000ltr. Storage Tank (1st Floor) |
| 152 | Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of E.I.C.(a)20mm dia C-PVC Pipe(Internal) |
| 153 | (b)25mm dia U-PVC Pipe(External) |
| 154 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. |
| 155 | Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. |
| 156 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Jaquar Make)(a)15mm dia CP Bib cock |
| 157 | (b)15mm dia CP(LB) Bib cock |
| 158 | (c)15mm dia CP Two way Bib cock |
| 159 | (d)15mm dia CP Pillar cock Elbow action |
| 160 | (e)15mm dia CP Angle stop cock |
| 161 | (f)15mm dia CP Concealed stop cock |
| 162 | (g)15mm dia CP Revolving Shower with shower Arm |
| 163 | (h)15mm dia Health Faucet & 1.0m long Flexible pipe |
| 164 | (i)25mm dia PVC F.W.V. 125mmx100mm Size Bore Well Through DTH Method:- |
| 165 | Labour for drilling of perfactly vertical bore holes as specified dia. For a specified depth below GL through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi)as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 200mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft,medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and with drawing after complete of tube well.(Tube well-1No) (a)Drilling of 125mm. dia. Bore-0.00mtr to 29.40mtr |
| 166 | (b)Drilling 100mm dia. Bore-29.40mtr to 100.00mtr |
| 167 | Lowering the following GI/PVC pipe with or without soltted pipes as per necessity from GL upto 30.00m depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I)supplied by the contractor (including cost of pipe) (a)Lowring of 125mm dia pipes-0.00mtr to 29.40mtr |
| 168 | (b) Cost of 125mm dia PVC casting pipes-00.0m to 30.00 m |
| 169 | Cleaning&developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. 1.00HP Single Phase Submersible Pump Set |
| 170 | Supplying all materials,labour,T&P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit./Hour & a head-55/70mtr.of reputed make(CRI/ KSB/Texmoor Equivelent)Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 171 | Supplying all materials,labour,T&P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C. |
| 172 | Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.0HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 173 | Supplying all materials,labour,T&P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 174 | Supplying fitting and fixing of plastic rope MS well cover,MS clamp,stainless steel short piece,bend & socket including all cost,taxes etc all complete as per direction of the E.I.C. |
| 175 | Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender