Tender For Providing,Laying,Testing & Commissioning Of 400 Mm Dia D.I. S/S ( K- 9 ) Pipe In Raw Water Rising Main From Existing Intake Well To Existing Ugr, Paradeep
Tender Value
5.83 Crore
Estimated cost
Bid Submission
12 Oct 2026
5 days left
EMD
5.83 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing,Laying,Testing & Commissioning Of 400 Mm Dia D.I. S/S ( K- 9 ) Pipe In Raw Water Rising Main From Existing Intake Well To Existing Ugr, Paradeep
BOQ
| Sl. No. | Item Description |
| 1 | Earth work without blasting in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.(By Mechanical means) |
| 2 | Earth work in slushy soil (in water upto 0.6m depth requiring the aid of pans and vessels) within 50m. Initial lead and 1.5m initial lift as per the direction and specification of the Deparment.(By Mechanical means) |
| 3 | Earth work in excavation in all kind of soil within initial lead & lift including dressing, levelling & breaking clods to maximum 5cm to 7cm size & laying in layers not exceeding 0.3m in depth & as per specification & direction of EIC.(Following MORTH by Mechanical means) |
| 4 | Supplying all labour for filling the pipe line trenches with sand including watering & ramming etc. all complete including T&P, cost of sand, conveyance,royality, loading & unloading as per specification & direction of EIC. |
| 5 | Supplying all materials, labour, T&P for laying of 400 mm dia centrifugally cast (Spun) Ductile Iron Pressure Pipes (DI) for water works purpose with socket & spigot ends confirming to IS-8329/2000 with classification K-9 suitable for push on joints with outside zinc coating including testing the pipe line with required water pressure , the cost inclusive of rubber gasket (EPDM) as per IS 5382/1985 with ISI mark etc.all complete as per specification & direction of EIC (Excluding cost for earth work, jointing of specials, & fittings which shall be paid separately). |
| 6 | 400 mm dia (NB) DI S/S (K-9) Pipe as per IS-8329/2000 having ISI Mark suitable for push-on joints. |
| 7 | Material |
| 8 | Labour |
| 9 | Supplying all materials, labour, T&P and making push-on joints with rubber gasket ring as per IS-5382/1985 suitable for D.I pipe and fittings of the following nominal dia including testing of the joints with required water pressure etc all complete as per specification & direction of E.I.C. |
| 10 | Rubber Gasket (SBR/EPDM) suitable for 400mm dia D.I pipes & fittings as per IS -5382/1985 with ISI mark. |
| 11 | Supplying all materials, labour T&P for laying of following dia MS Pipes as per site condition for water works purpose inclusive of all duties, transportation, hire & running charges of machineries, with all consumables etc. including testing the joint with required water pressure etc all complete as per specification and direction of EIC. |
| 12 | 400mm dia (NB) MS pipe |
| 13 | 150mm dia (NB) MS pipe |
| 14 | Supplying all materials, labour, T&P and laying in trenches of following D.I fittings confirming to IS- 9523:2000, & fixing with the pipes after cutting the pipes to required shape & size including wastage etc.of following nominal diameter, all complete including testing the joints with required water pressure as per specification & direction of EIC. (Excluding cost of earth work in trenches, back filling & rubber gasket) |
| 15 | 400X 400 X 100 mm D/S Flange Tee |
| 16 | 400 X 400 X 150 mm D/S Flange Tee |
| 17 | 150mm MJ Socket |
| 18 | 400mm MJ Socket |
| 19 | 400mm Blank Flange |
| 20 | 400 mm A/S 45⁰Bend |
| 21 | 400 mm A/S 22.5⁰Bend |
| 22 | 400 mm A/S 11.25⁰Bend |
| 23 | 400 mm A/S 90⁰Bend |
| 24 | 400mm Socket Tail Piece |
| 25 | Supplying, fitting & fixing of following size of DI valves as per IS specifications including fixing the same with required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. |
| 26 | 400mm dia Sluice Valve (IS -14846 PN 1.0) |
| 27 | 150mm dia Sluice Valve (IS -14846 PN 1.0) |
| 28 | 100 mm Kinetic Air Valve with Isolation valve ( IS - 14845 PN 1.0) |
| 29 | 400 mm Non return Valve ( PN 1.0) |
| 30 | Supplying all materials, labour and T&P required for construction of RCC M-25 valve chamber of following size at all locations using BHGchips , including cost for rigid, centering , shuttering & removing the same Providing & Placing MS reinforcement (HYSD bars) of required dia including ,PCC 1:3:6 with 40mm size h.g. metal (crusher broken) of 100mm thick, earth work excavation in all kinds of soil/rock including back filling duly watered & rammed and fixing pre-cast factory made RCC sluice valve cover with frame of clear opening of 600mmx450mm and providing and fixing of Polypropylene Steel Reinforced sluice valve steps .Painting the chamber with 2 (two) or more coats of approved weather coat paint over a coat of wall cement primer (water bound). Printing and writing the wall sign board of approved size and specification including cost of all materials, labour, T&P, royalties and hire & running charges of machineries with POL etc. all complete as per specification & direction of EIC.Valve chambers of RCC M-25 (1200mmx1200mmx1200mm ht) |
| 31 | Construction of RCC M-20 Thrust blocks following size confirming to IS-456/2000 at all locations using H.G. aggregate (crusher broken ) , curing , including cost for rigid leveled and plumbed centering and shuttering centering . Providing and placing MS reinforcement (HYSD bars) including bending, binding, and tying the grills for RCC works ,PCC 1:3:6 with 40mm size h.g stone metal (crusher broken) of 150 mm thick, earth work excavation in all kinds of soil/rock including back filling duly watered and rammed as per approved design and drawing etc. all complete as per specification & direction of EIC. |
| 32 | RCC Thurst Block of RCC M-20 (1000mmx1000mmx1000mm) |
| 33 | Providing all materials, labour, T & P for encasing the following dia of MS pipe with RCC M-20 with 20mm and down size h.g. crusher broken chips having minimum cube, strength 200 kg/cm2 at 28 days to confirming to IS-456/2000 and as per approved design & drawing . The minimum thickness of RCC from pipe bottom, top & all sides shall be not less than 300mm, 200mm & 150mm respectvely. The cost shall be inclusive of form work to required slope and plumb for all kinds of RCC work , providing & placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding & straightening of approved quality , tying the grills of RCC work and placing in posoition using binding wire (18 to 20 gauge) PCC 1:3:6 with 40mm size h.g. crusher broken metal of 100 mm thick etc. earth work excavation in all kinds of soil/rock including back filling duly watered and rammed etc all complete as per specification and direction of EIC. |
| 34 | 400mm dia |
| 35 | 150mm dia |
| 36 | Dismantling of Cement Concrete Grade M-15 & M- 20 including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres |
| 37 | Providing and laying cement concrete (1:1.5:3) in foundation using 12mm size hard black crusher broken granite chips of approved quality and size from approved quarry including cost, conveyance, royality, complete and providing all materials, labour T&P , watering and curing as per the specification & direction of Engineer-in-charge . |
| 38 | Providing all materials, labour, T&P for following size MS flange (Drilling for flange PN-1.0, as per IS-6392) suitable for following dia MS pipe including cutting the plates by oxygen and acetylene gas flames as per the required size and shape, including cost for hire and running charges of all machine with POL , painting the flange with coats of Epoxy paint of approved shade, testing of the joints with required water pressure etc. all complete as per specification and direction of EIC. |
| 39 | MS Flanges suitable for 400mm dia pipe |
| 40 | MS Flanges suitable for 150mm dia pipe |
| 41 | Providing all materials, labour,T&P for making following flange joints with the pipes & fittings, including supply of required and approved sizes of carbon steel nuts & bolts, washer,nitrile rubber gasket & paints etc, testing the joints with required water pressure etc all complete as per specification and direction of EIC. |
| 42 | 400mm dia |
| 43 | 150mm dia |
| 44 | Supplying all labour for Flame cutting and facing of MS pipe using oxygen and acetylene gas as per specification and direction of EIC including hire charge of machineries,cost of gas & conveyance etc. complete as per direction of EIC. |
| 45 | Supplying all labour for Providing joints by welding with two welding beads/pass coforming to IS : 816 - 1998 (Fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints ,as per specification including cost ,conveyance of all materials,hire and running charges of Machineries etc. complete. |
| 46 | Supplying all labour T&P for Filling foundation trenches and Plinth with excavated material laying in layers not exceeding 23cm thick, well watered & rammed etc. complete as per specification & direction of EIC. |
| 47 | Supplying all labour T & P and removing surplus earth by mechanical means within 5 Km radious etc all complete as per the direction of EIC . |
| 48 | 1.50 M high bamboo fencing with muli bamboo posts and strong bamboo frame work including all materials complete ( As per SR-2022 , page no-227 , item- Fencing 25.12 .2) |
| 49 | Shoring and shuttering foundation trenches, pits etc. with close wooden planks or sheets shuttering etc. excluding cost of planks and sheets (labour only) |
| 50 | Smart Water meter |
| 51 | 400 mm dia |
| 52 | 150 mm dia |
| 53 | Providing all labour , T & P for laying 500 mm dia MS pipe by (Horizontal Directional Drilling) HDD method under the existing RCC drain in all kinds of soil in a specified depth as and disposal of excavated earth within 50 m lead etc all complete as per specification and direction of EIC. |
| 54 | Cost of pre cast reinforced concrete pipes suitable for flush joint class NP-4 confirming to IS - 458/2003 ( As per EPM rate contract no- 79 dt- 04.01.2025) |
| 55 | 500 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender