Tender For Construction Of Barrack For Sentries At Evm/Vvpat Warehouse Paralakhemundi In The District Of Gajapati For The Year 2026-27
Tender Value
40.17 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
7 days left
EMD
40200
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gajapati → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Barrack For Sentries At Evm/Vvpat Warehouse Paralakhemundi In The District Of Gajapati For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil or gravelly soil with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, labour CESS, T&P and dewatering if required for the work etc. complete in all respects as directed by the Engineer-in-charge. |
| 2 | Supplying & filling in foundation and plinth with good quality river sand in layers not exceeding 23cm in depth and compacted with watering, ramming, dressed and leveled the top surface to required gradient including cost , conveyance , royaoity of all materials, cost of all labour, T&P, etc.required to complete the work in all respect as per direction of the Engineer-in-charge.(Measurement willl be taken on finished compacted section only) |
| 3 | Providing and laying cement concrete (1:3:6) in foundation & plinth using 40mm size black hard granite crusher broken metal and screened and washed sharp river sand of approved quality from approved quarry as per approved design including hoisting, lowering, laying and compacting to proper thickness, watering and curing for the required period, finished smooth, providing grooves or beads where necessary including cost, conveyance, royalty of all materials with labour, labour CESS , and T&P etc. required to complete the work in all respect including dewatering if required as per direction of the Engineer-in-Charge. |
| 4 | R.C.C. work with M-20 grade In Different RCC Works having minimum compressive strength in work test of 200 Kg/Cm² in 15cm cubes at 28 days after mixing and texts conducted in accordance with relevance IS code using 20 mm and downgraded size black hard granite crusher broken stone chips and screened and washed sharp river sand of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrator, watering, curing for 28 days, including cost of centering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalty of all materials , cost of all labour, labour CESS T&P etc. required for complete the work in all respect but excluding cost and conveyance of M.S. rods or Tor steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position as per the direction of the Engineer-in-Charge.Column Footing |
| 5 | Plinth Beam |
| 6 | Tie Beam |
| 7 | Column |
| 8 | Lintel |
| 9 | Chajja |
| 10 | Shelves |
| 11 | Roof slab |
| 12 | Supplying, fitting and placing uncoated SeQR TMT bar reinforcement including straightening bent up or coiled rods, cutting, bending, cranking, hooking, welding or jointing (if required) and binding, tying and placing in proper position as required for RCC works including cost, conveyance of steel and binding wires of 18 to 20 gauge and cost of all labour, labour CESS T&P etc. required for complete the work in all respect as per drawing and technical specification and directed by the Engineer-in-charge. (Weight of reinforcement shall be calculated on the basis of IS 1732, wastage ,overlaps, couplings, welded joints ,spacer bars, chairs, stays, and annealed steel wire or other method of binding &placing shall not be considered for payment). |
| 13 | Fly ash brick masonry in cement mortar (1:6) in Foundation& Plinth using Fly ash bricks of (23x11x8cm) size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks in water till saturation before use , including splays cutting, circular molding, chamfering, corbelling and all similar type of operations with all necessary projections watering, curing etc. complete including cost, conveyance, royalties, of all materials, cost of all labour, labour CESS T&P etc. complete in all respect as drawing and technical specifications and as per directed by the Engineer-in-charge. |
| 14 | Fly ash brick masonry in cement mortar (1:6) in Super structure using Fly ash bricks of (23x11x8cm) size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks in water till saturation before use , including splays cutting, circular molding, chamfering, corbelling and all similar type of operations with all necessary projections watering, curing etc. complete including cost, conveyance, royalties, of all materials, cost of all labour, labour CESS T&P ,Scaffolding as required etc. complete in all respect as drawing and technical specifications and as per directed by the Engineer-in-charge. |
| 15 | Providing 12 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as required to complete the work in all respect as per the Direction of the Engineer-in-charge . |
| 16 | Providing 16 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as required to complete the work in all respect as per the Direction of the Engineer-in-charge . |
| 17 | Providing ,Supplying fitting and fixing of Polished Vitrified floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622:2006 (Group-B la) of size 600mm x 600mm, Plain Ivory, in floors and treads on steps and landing on 20mm thick bed of cement mortar 1:4(1 cement : 4 screened and washed river sand ) jointed with neat white cement mixed with pigment to match he shades of the tiles ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer-in-charge. |
| 18 | Providing ,Supplying fitting and fixing of Polished Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622:2006 (Group-B la) of size 600mm x 600mm . Plain Ivory, in Dados skirting and rises of steps on 12mm thick cement plaster 1:3 (1 cement :3 screened and washed river sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles , ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer-in-charge. |
| 19 | Providing ,Supplying fitting and fixing of Chequred tiles, in floors and treads on steps and landing on 25mm thick bed of cement mortar 1:4(1 cement :1 course sand screened and washed) filling the joints with cement mixing with pigment matching to the shade of tile ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer-in-charge. |
| 20 | Providing ,Supplying fitting and fixing of Granite tiles in walls & dados skirting and risers of steps 12mm thick cement mortar 1:3(1 cement : 3 screened and washed river sand ) jointed with neat white cement mixed with pigment to match he shades of the tiles ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer-in-charge. |
| 21 | Supplying, fitting & fixing of MS Window grills, grill gates and Doors made of ISI marked MS angle, M.S Flat or M.S square bars (10mm) and all fittings and fixtures of approved design and specification including cost, conveyance, fabrication of all materials, cost of all labour, labour CESS and T&P. etc. required to complete the work in all respect as per direction of Engineer-in-Charge. |
| 22 | Providing and fixing of WPC door frames with rebate cuts and finished cross section size 75mm x 45mm or 90mm x 50mm, including cost of all materials, cost of all labour conveyance, taxes, loading, unloading scaffolding, slaging watering and curing, T&P, etc, complete as per the direction of the Engineer-in-charge. (As per proceedings of C.C.E level committee meeting held on Dt. 12.02.2024 at 11.30 A.M.) |
| 23 | Supplying fitting and fixing of 32 mm thick flush door shutter with approved quality of 30 mm thick BWR block board pasted with 1 mm thick sumica on both side of approved design and quality including of all door fittings and fixtures etc. complete. Vide SOR 2022, Page-234 |
| 24 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three Track. Three panel sliding window -60-Series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x58 mm x2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards as per direction of the Engineer-in-Charge. |
| 25 | Providing and Finishing surfaces of walls & ceiling with cement based wall putty [ water based ] of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging and cost , conveyance of all the materials ,including cost of all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge. |
| 26 | Finishing interior surfaces of walls with two coats of Plastic emulsion paint over a coat of water bound cement primer on Plastered surfacing approved quality and shade from a recognized company to give an even shade including preparation of the surface before applying , including cost of scaffolding ,staging and cost ,conveyance of all materials ,cost of all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge. |
| 27 | Providing & painting exterior surfaces of walls with two coats of Weather seal coat paint of approved quality and shade over a coat of wall primer from a recognized company to give an even shade, after cleaning the plastered surface perfectly by watering and brushing including cost of scaffolding ,staging and cost ,conveyance of all materials ,all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge. |
| 28 | Painting 2 (Two) coats with synthetic enamel paint to iron work over a coat of primer of approved colour, shade after sand papering , polishing the surface including cost, conveyance of all materials, all labour, labour CESS T&P , scaffolding etc. required to complete the work in all respect as per drawing and technical specification and direction of Engineer-in-Charge. |
| 29 | Providing and laying cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened and washed sharp river sand of approved quality from approved quarry as per approved design including hoisting, lowering, laying and compacting to proper thickness, watering and curing for the required period, finished smooth , providing grooves or beads where necessary including cost, conveyance, royalty of all materials with labour, labour CESS , and T&P etc. required to complete the work in all respect including dewatering if required as per direction of the Engineer-in-Charge. |
| 30 | Clearing grass and removal of rubbish up to distance of 50m outside the periphery of the area including cost of all labour, labour CESS and T&P. etc. required to complete the work in all respects as per direction of Engineer-in-charges. |
| 31 | Providing and laying 2.50 cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 4.7mm size black hard granite crusher broken chips and screened & washed sharp river sand of approved quality from approved quarry and finished smooth, including watering and curing for the required period including cost, conveyance, royalties of all materials, cost of all labour, labour CESS, T&P etc. required to complete the work in all respect as per direction of the Engineer-in-Charge. |
| 32 | E.I WorkRecessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch (make-Anchor/ Legrand /Roma/Equivalent)ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO/C&S) Group-A -L.P- 12 F.P- C.B.P- |
| 33 | Group-B L.P- 15 F.P-3 C.B.P- |
| 34 | Group-C L.P- 12 F.P- 7 C.B.P- |
| 35 | Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type )(make-Anchor/ Legrand /Roma/Equivalent) |
| 36 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing 1 nos of 3 pin 5/6 A modular socket outlet and 1 nos of 5/6 A modular switch connection (make-Anchor/ Legrand /Roma/Equivalent) |
| 37 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing 1 nos of 6pin 15/16Amp socket outlet and 1 nos of 15/16Amp Modular switches connection (make-Anchor/ Legrand /Roma/Equivalent) |
| 38 | S/F of Multipurpose board Supply and fixing of 2 no.sof 3pin 5/6 amp modular socket and 2 nos of S.P. 5/6 amp one way modular switch on Modular G.I. Box with Modular Base and cover. (make-Anchor/ Legrand /Roma/Equivalent) |
| 39 | Supply and fixing of 4 no.s of 3pin 5/6 amp modular socket and 3 nos of S.P. 5/6 amp one way modular switch, on Modular G.I. Box with Modular Base and cover. (make-Anchor/ Legrand /Roma/Equivalent) |
| 40 | Supply and drawing of following size PVC insulated single core multistrand copper conductor in existing surface/recessed/STEEL / conduit as required.1 X 1.5sqmm |
| 41 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO) 2 X 1.5sq.mm +1 X 1.5sqmm |
| 42 | 2 X 2.5sq.mm +1 X 1.5sqmm |
| 43 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 44 | S/F of 20 to 32 amp 240 V , DP AC Starter on surface or in recess with complete connections, testing and commissionig etc. as required. |
| 45 | Supply and fixing of different type of fitting with lamp S/F of 9Watt LED bulb fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 46 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 47 | S/F of 20W 4' LED fitting Surface LED Light fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 48 | S/F of 18Watt White Circular/Square Surface LED fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 49 | S/F of 90W LED street light fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 50 | S/F of G.I. Street light Bracket with M.S. Clamp |
| 51 | S/F of Geyser(15ltr) Crompton make |
| 52 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard/V-Guard)S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)Crompton Grave/Khaitan/Orient/Polycab/Bajaj/V-Guard |
| 53 | Exhaust fan 225mm (9\\") size With Making hole requir size.(Make-Havels/Ushs/Almonard/Orient/Cromoton/ or Equivalent) |
| 54 | Exhaust fan 450mm (18\\") size With Making hole requir size.(Make-Havels/Ushs/Almonard/Orient/Cromoton/ or Equivalent) |
| 55 | Wall mounted fan 400mm |
| 56 | Pedestal fan 18\\" size |
| 57 | Exhaust Fan-Hold Making and Fixing Charges |
| 58 | Supply and fixing of Modular fan regulator(Cona/ Anchor/ Usha/Bajaj)Electronics step type Regulator (Modular type) |
| 59 | Supply and fixing of extra down rod20mm dia for 10cm x 6 |
| 60 | Supply and fixing of 5Amp to 32A rating 240V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)6 to 32 Amp rating Single pole (SP) MCB |
| 61 | 0.5 to 5 amp rating Single pole (SP) MCB |
| 62 | Supply and fixing of following rating Double Pole 240V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)32 Amp DP MCB/ ISOLATOR |
| 63 | 40 Amp DP MCB ISOLATOR |
| 64 | 63Amp DP MCB ISOLATOR |
| 65 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.)4 WAY, SINGLE DOOR |
| 66 | 8 WAY, DOUBLE DOOR |
| 67 | Supplying and fixing of following MODULAR type switch / socket on the existing switch box / cover including connections etc as required6 Pin 15/16 Amp Modular socket outlet |
| 68 | 6 Pin 15/16 Amp Modular socket TOP |
| 69 | Blank plate |
| 70 | T.V. socket outlet modular type ISI Marked |
| 71 | Supply and fixing of 4pole MCCB in cubicle pannel board S/F of 50 to 63 AMP 25KA MCCB of Hager/Legrand/C&S Make with MS box including both side connections with all complete |
| 72 | Supply and fixing of copper bus bar with suitable sheet metal enclosure on MS angle frame with proper grouting on wall including all connections. 63Amp TPN bus bar -300 X 25 X 3mm size |
| 73 | Supply of PVC/XLPE Aluminium armored cables ISI marked.(Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha)4sq.mm 4 core |
| 74 | 16sq.mm 4core |
| 75 | Supply and making fnd termination with brass compression gland and aluminium logs for following size of PVC insulated and PVC sheathed/XLPE aluminium cable of 11 kv grade (without cost of cable) as required4sq.mm 4 core |
| 76 | 16sq.mm 4core |
| 77 | Cable laying Cable laying on wall surface with steel shaddle upto 25sqmm |
| 78 | MV cable laying up to 25 sq.mm in ground without sand and cover |
| 79 | Laying of HDPE pipeSupply and laying 50mm dia HDPE pipe, with all fitting laid in trenches, road crossing and fixing to walls, on poles etc complete all as specified and directed.(180 mtr forn main cable and 120mtr for service cable) |
| 80 | S/F of PVC pipe for Net wiring |
| 81 | Supply and fixing of InverterSupply of Invertor,UPS 2300VA Pure shine wave (Make Microtech/Su-kam/Luminous) |
| 82 | Supply of Invertor Battery 12V 150AH(Make Exide/Amrom/Su-kam/Luminous with 48 Month warranty) |
| 83 | Supply of Invertor Stand for Double Battery stand(Make Microtech/Su-kam/Luminous) |
| 84 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required |
| 85 | Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories |
| 86 | Supply and fixing of Room Cooler ,Make-Symphony -27 L |
| 87 | Repair & Maintenance of High-Mast Light Fitting |
| 88 | S/F of 120W LED flood light fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 89 | S/F of 90W LED street light fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 90 | Supply of PVC/XLPE Aluminium armored cables ISI marked.(Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha)10sq.mm 4core |
| 91 | Supply and making fnd termination with brass compression gland and aluminium logs for following size of PVC insulated and PVC sheathed/XLPE aluminium cable of 11 kv grade (without cost of cable) as required10sq.mm 4core |
| 92 | Cable laying MV cable laying up to 25 sq.mm in ground without sand and cover |
| 93 | P.H WorkSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.(Supreme/Ashirvad/Oriplast)Ground Floor20mm Dia CPVC Pipe |
| 94 | 25mm Dia CPVC pipe |
| 95 | 32 mm dia PVC ASTM (Sch-80) pipe |
| 96 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm Thick Wall Ground Floor |
| 97 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in ground Floor |
| 98 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. Ground Floor |
| 99 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge250mm to 375mm thick wall. |
| 100 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15 mm dia CP Long body Bib cock(Jaquar)CON-CHR-107KN |
| 101 | 15mm dia CP angle stop cock (FLR-CHR-5053N Jaquar make) |
| 102 | 20mm dia CP Con. stop cock (CON-CHR-089KN) |
| 103 | 15mm dia CP Pillar cock (FLR-chr-5011N Jaquar make) |
| 104 | 15mm dia CP two in one bib cock (FLR-CHR-5041N Jaquar make) |
| 105 | 15mm dia CP Health faucet (ALD-CHR-573 Jaquar make) |
| 106 | 15mm dia CP Sink Cock (FLR- CHR- 5347 NJaquar make) |
| 107 | Revolving Shower with arm Jaquar Cat NO--OHS-CHR-1985 + SHA-CHR-477 |
| 108 | 25mm dia brass or gun metal fullway valve(Leader / Kriti Make) |
| 109 | 32mm dia brass or gun metal fullway valve(Leader / KritiMake) |
| 110 | 15mm dia CP flange |
| 111 | 15mm dia CP extension piece |
| 112 | 125mm CP grating |
| 113 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. Fixing 2000 Ltr Roto-moulded water storage tank (3 layers) on the roof of 1st floor |
| 114 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast)110mm dia U-PVC SWR pipe |
| 115 | 75 mm dia UPVC SWR Pipe (supreme/ashirvad) |
| 116 | 110mm U-PVC door tee |
| 117 | 110mm U-PVC Plain tee |
| 118 | 110mm U-PVC door bend |
| 119 | 110mm U-PVC plain bend |
| 120 | 110mm dia U-PVC 'P' trap |
| 121 | 110mm dia U-PVC Plain Shoe Bend |
| 122 | 110mm dia U-PVC offset with out ear |
| 123 | 110mm dia U-PVC cowl |
| 124 | 75 mm dia UPVC plain bend |
| 125 | 75 mm dia UPVC plain Tee |
| 126 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral Por S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with S trap plain (Parryware / Nycer make) |
| 127 | Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge. 580mmx440mm size Orissa pan (Parryware/Hinware) |
| 128 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white (Parryware/Hinware) |
| 129 | Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Half stall urinal (Jaquar/Parryware / Hindware make). URS-WHT-13253N Urinal (Back Inlet) |
| 130 | 15mm dia urinal spreader |
| 131 | 32mm dia C.P. dome waste |
| 132 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx440 mm size wash hand basin With porcelain pedestal(Parryware/Hinware) |
| 133 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 134 | CP Towel ring |
| 135 | Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge. CP soap holder |
| 136 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge.600mmx125mm glass shelf with CP/NP guard rails |
| 137 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5m thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge. Mirror(Bevellededge) 600mmx450mmx200mm |
| 138 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink With sink cock with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge 600x450x250 mm SS sink(With drain board -NIRALI) |
| 139 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etcall complete as per direction of the Engineer in charge.Ground Floor;- |
| 140 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeGround Floor;- |
| 141 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C.Ground Floor;- |
| 142 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Ground floor . |
| 143 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany / Johnson to be pre-approved 300 x 300mm of size In Ground Floor |
| 144 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany/Jonson 45cm x 30 cm size of Ground Floor;- |
| 145 | Factory made Solid WPC door frame of size 90mmx45mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge (Rajshri plastiwood/Alstone/Aramstrong or equivalent as per direction of Engineer-in-charge) |
| 146 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour brown/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. (Rajshri plastiwood/Alstone/Aramstrong or equivalent as per direction of Engineer-in-charge) |
| 147 | EXTERNAL PH WORKSupplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm |
| 148 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm |
| 149 | Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mmx910mmx910mm |
| 150 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.1.40m dia x 2.00m deep soakway pit |
| 151 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturers specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia U-PVC Alround Concrete |
| 152 | 160mm dia U-PVC Alround Concrete |
| 153 | Construction 1 nos 20 users RCC Septic tankEarth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge. |
| 154 | - do - with addl. Depth of 1.5 m |
| 155 | Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department. |
| 156 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -chargeIn ground floor |
| 157 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.In ground floor |
| 158 | Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeBase |
| 159 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 160 | For RCC wall |
| 161 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor |
| 162 | Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 163 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 164 | Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 150mx150mx150m as per P.H.D.specification and direction of the E.I.C. |
| 165 | Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete. |
| 166 | Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipe |
| 167 | 110mm dia U-PVC Plain shoe bend |
| 168 | 110mm dia U-PVC Cowl |
| 169 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 170 | Sinking of 150mmx125mm dia large Tube wellLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore.Labour for Drilling of 150 mm dia bore 0mtr to 30mtr |
| 171 | Labour forDrilling of 125mm dia bore 31mtr to 45mtr |
| 172 | Labour for Drilling of 125 mm dia bore 46mtr to 120mtr |
| 173 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering of 125 mm dia GI/P.V.C/MS casing pipes 0 mtr to 30 mtrs |
| 174 | Lowering of 125mm dia GI/P.V.C/MS casing pipes 31 mtr to 45 mtrs |
| 175 | 125 mm dia ASTM-D-1785/89 P.V.C schedule-80 pipe |
| 176 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in chargeBy DTH |
| 177 | Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).Submerssible Pump Set 1 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 6110 L.M.P with outlet dia of 32 mm. |
| 178 | DOL control panel |
| 179 | 2.50 sqmm cable |
| 180 | 32mm dia steel short piece |
| 181 | 32 mm dia HDPE Pipe |
| 182 | Bore Cap |
| 183 | C.I.Bracket |
| 184 | Rope Wire |
| 185 | Labour charges for lowering of submesible pumpset with pipes and cables etc. with testing and commissioning at site. |
| 186 | Supply all materials,labours,T&P and construction bore well protection chamber of the inside size 650x650x1000 height with cement concrete ( 1;3;6) using 40 mm size hard granite metal on foundation,1st class fly ash brickwork incement motar(1:3),with base cement concrete (1:2:4) useing 12 mm size h.g chips ,12 mm thick cement plaster (1:4) inside and out site ,R CC cover slab in (1:1.5:3) using 12 mm size h.g chips earthwork in excavation in all kinds of soil and refiling the cavity around the chamber including watering ,curing,convayance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification and direction of the engineer-in -charge. Bore well protection chamber. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender