Tender For annual repair maintenance Various E & M Services In Da Staff Quarters, Delhi. (Sh: Maintenance And Upkeeping Of E & M Services At Da Flat Nimri Colony, Ashok Vihar, & Haiderpur, Shalimar Bagh Under Pwd Nwesd-Ii.)
Tender Value
98.67 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
9 days left
EMD
1.97 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair maintenance Various E & M Services In Da Staff Quarters, Delhi. (Sh: Maintenance And Upkeeping Of E & M Services At Da Flat Nimri Colony, Ashok Vihar, & Haiderpur, Shalimar Bagh Under Pwd Nwesd-Ii.)
BOQ
| Sl. No. | Item Description |
| 1 | SH-I Maintenance of EI & fans, Haiderpur(Man Power)Providing services for routine maintenance and attending day to day complaints of electrical installations and compound light, basement lighting including repairing the wiring, lighting fixture complete with carrying out the daily drill comprising of cleaning of the electrical installation, lodging of electrical complaint in the complaint register, testing the insulation resistance, earth resistance etc and providing assistance to the engineer-in-charge during breakdown maintenance complete with replacement of worn-out parts issued by the department etc on all days of the month round the clock including Sundays and Holidays etc. as required with all electrical installation in type 3 and type 4 residential staff quarters, Haiderpur, Shalimar Bagh as per terms and conditions attached.The following staff shall be engaged by the contractor :-(i) Wireman cum pump operator - 3 Nos. (One No. in Each Shift round the clock, 6:00 AM to 2:00 PM, 2:00 PM to 10:00 PM and 10:00 PM to 6:00 AM) (ii) Khallasi - 2 No. (each shift 6:00 AM to 2:00 PM and 2:00 PM to 10:00 PM) |
| 2 | SH-II Operation of Substation & DG Set(Man Power)Providing services for running operation and routine maintenance of 11 KV / 415 Volts, 2 x 630 KVA electric sub-station & allied equipment including HT / LT Panel, cables & protective equipments, 630 KVA 1 No. and 320 KVA 1 No. DG Sets with auto start panel (AMF Panel) on all days including Sundays & Holidays including recording of all parameters like HT & LT Voltage, current, power factor and daily cleaning / dressing of all panels, DG Sets, EI accessories, cable trays and periodical checking & testing on all days including Sundays and Holidays etc as required with all installations in sub stations as per terms & Conditions attached. The following staff shall be engaged by the contractor :- (i) DG Set cum Sub Station operator - 3 Nos. (One No. in Each Shift round the clock, 6:00 AM to 2:00 PM, 2:00 PM to 10:00 PM and 10:00 PM to 6:00 AM) |
| 3 | SH-III Maintenance of EI & fans, Nimri Colony(Man Power)Providing services for routine maintenance and attending day to day complaints of electrical installations and compound light, basement lighting including repairing the wiring, lighting fixture complete with carrying out the daily drill comprising of cleaning of the electrical installation, lodging of electrical complaint in the complaint register, testing the insulation resistance, earth resistance etc and providing assistance to the engineer-in-charge during breakdown maintenance complete with replacement of worn-out parts issued by the department etc on all days of the month round the clock including Sundays and Holidays etc. as required with all electrical installation in type 2 and type 3 residential staff quarters, Nimri Colony, Ashok Vihar as per terms and conditions attached.The following staff shall be engaged by the contractor :-(i) Wireman cum pump operator - 3 Nos. (One No. in Each Shift round the clock, 6:00 AM to 2:00 PM, 2:00 PM to 10:00 PM and 10:00 PM to 6:00 AM) (ii) Khallasi - 2 No. (each shift 6:00 AM to 2:00 PM and 2:00 PM to 10:00 PM) |
| 4 | SH-IV (Material)Supplying of following electrical accessories for day maintenance in the existing electrical installation etc. as required.a) S.P. 5/6 A, one way switch, piano type ISI marked |
| 5 | b) S.P. 15/16 A, one way switch, piano type ISI marked |
| 6 | c) 6 pin 15/16 & 5/6 A socket outlet, piano type ISI marked |
| 7 | d) Piano type electronic fan regulator socket type |
| 8 | e) Bell push, piano type |
| 9 | f) Modular bell push, ISI marked |
| 10 | g) Call bell/ buzzer, single phase |
| 11 | h) 2.5 MFD Capacitor |
| 12 | i) 3.15 MFD Capacitor |
| 13 | j) S.P. 5/6 A, one way modular switch, ISI marked |
| 14 | k) 3 pin 5/6 A modular socket outlet, ISI marked |
| 15 | l) S.P. 15/16 A, one way modular switch, ISI marked |
| 16 | m) 6 pin 15/16 A modular socket outlet, ISI marked |
| 17 | n) Modular base & cover plate for 2 module |
| 18 | o) Modular base & cover plate for 3 module |
| 19 | p) Modular base & cover plate for 4 module |
| 20 | q) Modular base & cover plate for 6 module |
| 21 | r) Modular base & cover plate for 8 module |
| 22 | s) Modular base & cover plate for 12 module |
| 23 | t) PVC batten/ Angle holder |
| 24 | u) 3 mm thick phenolic laminated sheet |
| 25 | v) 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 26 | w) 4.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 27 | x) 6.0 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable |
| 28 | y) 10 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 29 | z) 6 A to 32 A ratings, SP MCB, “C” curve, 10 kA breaking capacity |
| 30 | aa) 6 A to 32 A ratings, DP MCB, “C” curve, 10 kA breaking capacity |
| 31 | ab) 63 A DP MCB \\"C\\" curve 10 kA Breaking Capacity |
| 32 | ac) 20 A, SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure |
| 33 | ad) 63 A Rating, 2 Pole RCCB, 30 mA |
| 34 | ae) 40 A, rating, 2 pole RCCB, 30mA |
| 35 | af) 4 pole MCCB,100A,30kA |
| 36 | ag) 4 pole MCCB, 200A, 36kA |
| 37 | ah) Sheet steel DP MCB enclosure |
| 38 | ai) 300 mm 1400 RPM heavy duty exhaust fan ISI Mark |
| 39 | aj) 250 mm ventillating fan with Louvers |
| 40 | ak) Stepped type Modular Fan regulator (2 module) |
| 41 | al) 1200mm, BEE 5 star rating, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 42 | am) LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) of following body materials.18 watt |
| 43 | an) LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) of following body materials. Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)a) 18- 22 Watt |
| 44 | b) 36 Watt |
| 45 | ao) LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy 105 <120 lm/Watt) of following body materials. a) 100 watt |
| 46 | b) 150 watt |
| 47 | c) 200 watt |
| 48 | ap) LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt) of following body materials.a) 72 watt |
| 49 | b) 100 watt |
| 50 | c) 150 watt |
| 51 | aq) Modular blanking plate |
| 52 | ar) Ceiling rose, 3 pin, 5 A ISI marked |
| 53 | as) 25 A modular SPMCB, 'C' curve |
| 54 | at) Brass compression gland for (22 mm) 3 X 10 sq. mm 1.1 kV grade cable |
| 55 | au) Brass compression gland for (28 mm) 4 X 16 sq. mm 1.1 kV grade cable |
| 56 | av) Brass compression gland for (28 mm) 4 X 25 sq. mm 1.1 kV grade cable |
| 57 | aw) Modular GI box for 1/2 module |
| 58 | ax) 3 Module (100mmX75mm) modular GI BOX |
| 59 | ay) 4 Module (125mmX75mm) modular GI BOX |
| 60 | az) Modular GI box for 6 module |
| 61 | ba) Modular GI box for 8 module |
| 62 | bb) Modular GI box for 12 module |
| 63 | bc) 3 Module PVC Box With Plate |
| 64 | bd) 6 Module PVC Box With Plate |
| 65 | be) Fancy wall bracket in stainless steel base duly wired with B-22 lamp holder suitable for CFL lamp/LED Retrofit lamp |
| 66 | bf) LED bulkhead luminaire of nominal lumen output of 700 lumens |
| 67 | SH-V Minor EI, Pumpset Work Rewinding of following size Submersible/Mono submersible/monoblock pumpset i/c dismantling of pumpset from site, cartage from site to work shop and return back, cutting the burnt winding wire (credit for old winding wire) & rewinding the same with PVC insulated copper winding wire etc. as reqd.a) 3 HP |
| 68 | b) 7.5 HP |
| 69 | c) 12.5 HP |
| 70 | Lowering of upto 3/5/7.5/10/20 HP Mono Submersible/Sewage/ Submersible P/set along with G.I. pipe in existing well/underground tank with the help of chain pulley and tripod etc. as reqd. |
| 71 | Taking out of upto 3/5/7.5/10/20 HP Mono Submersible/Sewage/ Submersible P/set along with G.I. pipe in existing well/underground tank with the help of chain pulley block and tripod complete as reqd. |
| 72 | Supplying & fixing 3 x 4 sq.mm. submersible flat cable coppper conductor cable of grade 1.1 KV including connection,testing etc. as reqd. |
| 73 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : a) 80 mm dia |
| 74 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :a) 80mm dia |
| 75 | S/I/T/C of Starter Control panel for 3 phase motor upto 7.5 HP having DOL starter of relay range 9 to 14 Amp. on the wall mounting comprising of contactor, relay, single phase preventor, auto-manual On/Off voltage selector switch, voltmeter, ammeter, push buttons etc. as reqd. |
| 76 | Supplying and Fixing of fully automatic Star delta starter panel box, suitable for upto 10 HP Motor pump set (Heavy duty) comprising of voltmeter, ammeter, push buttons, indication Lamp, 3 position selector switch, manual SPP auto in new panel complete with internal wiring etc as reqd. |
| 77 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required a) Group A |
| 78 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable and 1.5 sq. mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. a) Group A |
| 79 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 80 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 81 | SITC of Metal Louver/shutter for exhaust fan for suitable size up to 7th floor with the help of tower wagon/hydra with 3-core 1.5 mm PVC insulated wire etc. as required and also dismantling the existing shutter. |
| 82 | Supply of New Generation IP65 LED, 40 Watt post top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source. Opal Cover offers soothing uniform illumination for different applications complete etc. as required at site. |
| 83 | Providing and fixing of PVC Trunking of following sizes complete with flexible cover, joint, endcap, cover on surface of wall/existing mounting etc. as required. a) 32 mm x 20 mm |
| 84 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi core cable in then existing surface/ recessed steel/ PVC conduit/channel asrequired. a) 3 core 1.5 sq. mm |
| 85 | b) 3 core 2.5 sq. mm |
| 86 | Supplying, Laying and fixing of one number PVC insulated and PVC sheathed / XLPE Aluminium conductor armoured power cable of 1.1 kV grade of following size on wall surface as required. (a) 3 X 10 sq. mm Alu. Cable. |
| 87 | (b) 4 X 16 sq. mm Alu. Cable. |
| 88 | (c) 4 X 25 sq. mm Alu. Cable. |
| 89 | Supplying, Laying and fixing of one number PVC insulated and PVC sheathed / XLPE Aluminium conductor armoured power cable of 1.1 kV grade of following size DWC/HDPE/ RCC/ HUME/METAL as required. (a) 4 X 25 sq. mm Alu. Cable. |
| 90 | Supplying & fixing Hot press moulded SMC box of size 250 x 200 x 105 mm i/c S/F Aluminium Bus Bar of suitable size i/c Phase, Neutral and Earth link, including 1 no. 6A to 32A rating 240 V 10KA \\"C\\" curve SP MCB & 1 no. earth bar, 1 no. Neutral bar, DIN rail mounting with openable hinged door on street light pole as required complete with mounting bracket/arrangement made of 5 mm thick GI flat iron etc. complete as required at site. pole/wall etc as reqd. at site i/c dismantling of existing. |
| 91 | Dismantling existing fire extinguishers and refilling of following capacity and type from installed position removing old gas/other extinguishing material from from cylinder hydraulic pressure testing taking to workshop, refilling of gas/catridge/other extinguishing material, pasting of stickers, bring back to site and reinstallation etc as required. a) ABC powder type fire extinguisher 6 kg capacity |
| 92 | b) Co2 gas type fire extinguisher 4.5 kg capacity |
| 93 | Repairing of existing burnout Sub panel Dismantling / Disconnection of All Cable Connection from bus bar MCCB, removing all melted/ Damaged aluminium bus bar solid connection link to switchgears cleaning of all terminals of MCCB/ MCB Bus bar with thinner CTC removing carbon dust dirt by sand paper including replacement of al damaged aluminium bus bar solid connection link, suitable for 250 & 100AMp MCCB with Fabrication, Drilling, Replacing defective nut, Bolt, washer i/c interconnection with 10 Sq.mm FRLS copper wire for MCB and reconnections all the cable to bus bar/ MCCB after repairing the Sub panel, Providing missing front cover i/c making good the same for suitable for 415 Volt 50Hz AC supply complete with testing Etc as reqd. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender