Tender For Eius(Capital). Sub Head : Supplying Installation Testing And Commissioning Of Gi Street Light Poles And Street Lights With Allied Accessorie And Switchgears In Dusib Shishu Vatika / Parks Locted At J & H Block Old Seemapuri And Aradhik Nag
Tender Value
15.45 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
5 days left
EMD
31000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Eius(Capital). Sub Head : Supplying Installation Testing And Commissioning Of Gi Street Light Poles And Street Lights With Allied Accessorie And Switchgears In Dusib Shishu Vatika / Parks Locted At J & H Block Old Seemapuri And Aradhik Nagar In Dusib Jj Cluster Assembly Constituency Ac- 62, Sahadara Under The Jurisdiction Of E-3 Division.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A Cost index on DSR 2022 on Rs. 1015 x 1.0633 = 1079) |
| 2 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire Cost index on DSR 2022 on Rs. 233x 1.0633 = 248) |
| 3 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door Cost index on DSR 2022 on Rs. 2573 x 1.0633 = 2736) |
| 4 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A Cost index on DSR 2022 on Rs. 527x 1.0633 = 560) |
| 5 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole Add cost index on DSR 2022 on Rs. 256 x 1.0633 = 272) |
| 6 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A Cost index on DSR 2022 on Rs. 2722 x 1.0633 = 2894) |
| 7 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/ coke and salt as required. Add cost index on DSR 2022 on Rs. 6855 x 1.0633 = 7289) |
| 8 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. Add cost index on DSR 2022 on Rs. 42 x 1.0633 = 45) |
| 9 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm (Add cost index on DSR 2022 Rs. 37 x 1.0633 = 39) |
| 10 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as reqd. Upto 35 sq. mm (clamped with 1mm thick saddle) Add cost index on DSR 2022 on Rs. 55 x 1.0633 = 58) |
| 11 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) Add cost index on DSR 2022 on Rs.247x 1.0633 = 263) |
| 12 | Fabrication supply, erection installation, testing and commisioning of flange mounted hot dip galvanized Octagonal Poles of 6 mtrs height made from 3mm thick HT steel plate having minimum bottom dia of 130 mm & top dia of 70 mm complete with window with hinged cover at a height of 1 - 1.2 mtrs from the base for cable termination block etc and galvanized base plate of nominal size 220mm x 220 mm x 12 mm thick with anchor plate to suit the existing foundation including foundation nut and bolts at site as required i/c supplying and fixing of the following in the window box provided for cable termination, with provision for single/double arm bracket galvanized arrangement suitable for 1/2 Nos. LED street lights luminaries. a) Supplying and fixing 6mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos GI strips 4mm thick of suitable length and having suitable size tapped holes 10 nos as reqd. b) Supplying and fixing 40 Amp termination block suitable for upto 25 sqmm conductor 4 nos and shorting links - 5 nos on DIN channel i/c providing and fixing DIN channel of suitable length - 2 nos on the existing laminated sheet. c) Supplying and fixing 6 Amp SP MCB, 'C' characteristic curve - 2 Nos, Earth stud - 2 Nos welded at suitable height two Nos washer, springs washers and nuts. d) The nuts bolts shall be welded. |
| 13 | Fabrication supply, erection installation, testing and commisioning of flange mounted hot dip galvanized Octagonal Poles of 4 mtrs height made from 3mm thick HT steel plate having minimum bottom dia of 130 mm & top dia of 70 mm complete with window with hinged cover at a height of 1 - 1.2 mtrs from the base for cable termination block etc and galvanized base plate of nominal size 200mm x 200 mm x 12 mm thick with anchor plate to suit the existing foundation including foundation nut and bolts at site as required i/c supplying and fixing of the following in the window box provided for cable termination, with provision for single/double arm bracket galvanized arrangement suitable for 1/2 Nos. LED street lights luminaries. a) Supplying and fixing 6mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos GI strips 4mm thick of suitable length and having suitable size tapped holes 10 nos as reqd. b) Supplying and fixing 40 Amp termination block suitable for upto 25 sqmm conductor 4 nos and shorting links - 5 nos on DIN channel i/c providing and fixing DIN channel of suitable length - 2 nos on the existing laminated sheet. c) Supplying and fixing 6 Amp SP MCB, 'C' characteristic curve - 2 Nos, Earth stud - 2 Nos welded at suitable height two Nos washer, springs washers and nuts. d) The nuts bolts shall be welded. |
| 14 | Fabrication supply, erection installation, testing and commisioning of flange mounted hot dip galvanized Octagonal Poles of 5 mtrs height made from 3mm thick HT steel plate having minimum bottom dia of 130 mm & top dia of 70 mm complete with window with hinged cover at a height of 1 - 1.2 mtrs from the base for cable termination block etc and galvanized base plate of nominal size 200mm x 200 mm x 12 mm thick with anchor plate to suit the existing foundation including foundation nut and bolts at site as required i/c supplying and fixing of the following in the window box provided for cable termination, with provision for single/double arm bracket galvanized arrangement suitable for 1/2 Nos. LED street lights luminaries. a) Supplying and fixing 6mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos GI strips 4mm thick of suitable length and having suitable size tapped holes 10 nos as reqd. b) Supplying and fixing 40 Amp termination block suitable for upto 25 sqmm conductor 4 nos and shorting links - 5 nos on DIN channel i/c providing and fixing DIN channel of suitable length - 2 nos on the existing laminated sheet. c) Supplying and fixing 6 Amp SP MCB, 'C' characteristic curve - 2 Nos, Earth stud - 2 Nos welded at suitable height two Nos washer, springs washers and nuts. d) The nuts bolts shall be welded. |
| 15 | Supplying and fixing of 1 meter single arm bracket on the existing GI Pole suitable for 1 Nos. LED street lights luminaries and lightning finial. The arm shaft shall be hot dip galvanized inside and outside as per specification attached. |
| 16 | Supplying and fixing of 2 meter double arm bracket on the existing GI Pole suitable for 2 Nos. LED street lights luminaries. The arm shaft shall be hot dip galvanized inside and outside as per specification attached. |
| 17 | Supplying, installation, testing and commisioning of 45 watt LED street light with advanced high power LED optical design with high heat dissipation capablity with new generation energy saving and environment long life versatile powder coated die cast aluminium, protection class l, IP 66, luminaire efficacy > 120 lm/W minimum, CCT 5700K, CRI > 70, THD < 10%, built-in surge protection 4 kV min., External Surge Protection 10 kV, Power factor > 0.95, IK07, the driver should be potted, capable to withstand 440V for 8 Hrs with high power LED light source with secondary lens complete etc. As required housing reflector and enclosed with toughened glass complete with all accessories. |
| 18 | Supplying, installation, testing and commisioning of 120 watt LED street light with advanced high power LED optical design with high heat dissipation capablity with new generation energy saving and environment long life versatile powder coated die cast aluminium, protection class l, IP 66, luminaire efficacy > 120 lm/W minimum, CCT 5700K, CRI > 70, THD < 10%, built-in surge protection 4 kV min., External Surge Protection 10 kV, Power factor > 0.95, IK07, the driver should be potted, capable to withstand 440V for 8 Hrs with high power LED light source with secondary lens complete etc. As required housing reflector and enclosed with toughened glass complete with all accessories. |
| 19 | Supplying and fixing of wall mounting internal prewired (FRLS) Street Light panel having CRCA sheet steel enclosure duly phosphatised and powder coated with IP 54 degree of protection conforms to IS/IEC 60947-4-1, comprising of MCB (SPN), Contactor, MCB (SP), Timelite-32A 3Pole/230V-Astronomical TimeSwitch, Maximum load upto 10 kw, earthing screw, inbuilt short circuit protection, class H insulation, louvers on both sides etc. suitable for operation of High Mast/Street lights/Area light pole. (MR) |
| 20 | Supply of PVC insulated armored and PVC Sheathed (general pupose) multi core cable with standard aluminium conductor suitable for working voltage upto and including 1100 volts confirming to IS7098 as required 4 x 10 Sqmm. |
| 21 | S/I/T/C of 4 feet nominal size LED batten having extruded polycarbonated housing for heat dissipation with polycarbonate diffuser and integrated electronic driver, colour temperature 6500K having wattage 22 W suitable to operating voltage of 140 to 270 volt with protection class IP20,surface/wall mounted, i/c connections complete etc as reqd. |
| 22 | Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 23 | P/I/T/C of 25W LED energy saving street light luminaire made up of aluminium alloy housing with acrelic cover IP-66 on the existing bracket and connection with suitable copper conductor wire complete as required. |
| 24 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Add MF Rs. 2730 x 1.0633 = 2903) |
| 25 | Supplying and fixing single module stepped type electronic fan regulator on the existing modular/ phenolic laminated plate/switch box including connections but excluding modular/laminated phenolic plate etc. as reqd. |
| 26 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (Civil DSR 2023) |
| 27 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (Civil DSR 2023) |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size). (Civil DSR 2023) |
| 29 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone- III) 3 graded stone aggregate 20 mm nominal size). (Civil DSR 2023) |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns, etc. for mass concrete. (Civil DSR 2023) |
| 31 | Correction factor on Civil DSR 2023 @ 0.973 on S.No.26 to 30 |
| 32 | Add cost Index @3 % on Civil DSR 2023 items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender