Tender For Renovation Of Chamber Of Ddg (Admn & Hr) Up East Lsa With Provision Of Attached Toilet At G.F. In Cto Compound Hazratganj Lucknow.
Tender Value
6.02 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
3 days left
EMD
12049
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Chamber Of Ddg (Admn & Hr) Up East Lsa With Provision Of Attached Toilet At G.F. In Cto Compound Hazratganj Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | DSR 2023 ITEMS |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 6 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 9 | Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 12 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 14 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 16 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 18 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 19 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 20 | Granite stone slab colour black, Cherry/Ruby red |
| 21 | Area of slab upto 0.50 sqm |
| 22 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 23 | Granite work |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 25 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 26 | Second class teak wood |
| 27 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 28 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 29 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 30 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : |
| 31 | 125x64x2.50 mm |
| 32 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 33 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. |
| 34 | After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. |
| 35 | Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. |
| 36 | Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: |
| 37 | (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 |
| 38 | (ii) Sites with structure height more than 20m for all wind speeds. |
| 39 | Fixed window / ventilator with mullion / transom. |
| 40 | Using R1 series with frame (33mm & above ) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 meter) |
| 41 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 42 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 43 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc. complete. |
| 44 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 45 | Glazed vitrified floor tiles polished finish of size |
| 46 | Size of Tile 600 x 1200 mm |
| 47 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 48 | 75 mm diameter |
| 49 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 50 | Single tee with door |
| 51 | 75x75x75 mm |
| 52 | Single tee without door |
| 53 | 75x75x75 mm |
| 54 | Bend 87.5° |
| 55 | 75 mm bend |
| 56 | 12 mm cement plaster of mix : |
| 57 | 1:6 (1 cement: 6 fine sand) |
| 58 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 59 | 1:6 (1 cement: 6 fine sand) |
| 60 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 61 | 20 mm cement plaster |
| 62 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 63 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 64 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 65 | French spirit polishing : |
| 66 | Two or more coats on new works including a coat of wood filler. |
| 67 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 68 | Two coats. |
| 69 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 70 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 71 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade |
| 72 | New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 73 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 74 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 75 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 76 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 77 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. |
| 78 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 79 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 80 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 81 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 82 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 83 | In cement mortar |
| 84 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): |
| 85 | From brick work in cement mortar |
| 86 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 87 | Of area 3 sq. metres and below |
| 88 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 89 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 90 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 91 | Providing and fixing soil, waste and vent pipes : |
| 92 | 100 mm dia. |
| 93 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989. |
| 94 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : |
| 95 | 100 mm dia pipe |
| 96 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 97 | 100 mm dia |
| 98 | Sand cast iron S&S as per IS - 3989 |
| 99 | Providing and fixing plain bend of required degree. |
| 100 | 100 mm dia |
| 101 | Sand cast iron S&S as per IS - 3989 |
| 102 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 103 | 100 mm inlet and 100 mm outlet |
| 104 | Sand cast iron S&S as per IS: 3989. |
| 105 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 106 | 25 mm nominal outer dia .Pipes. |
| 107 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 108 | 20 mm nominal outer dia .Pipes. |
| 109 | 25 mm nominal outer dia .Pipes. |
| 110 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 111 | 45 cm length |
| 112 | 15 mm nominal bore |
| 113 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 114 | 15 mm nominal bore. |
| 115 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 116 | 15mm nominal bore |
| 117 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 118 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
| 119 | 25mm nominal bore. Weighing not less than 62 gms. |
| 120 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 121 | With common burnt clay F.P.S. (non modular) bricks. |
| 122 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 123 | For pipes 100 to 250 mm diameter |
| 124 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 125 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 126 | Frame size 65 x 100 mm |
| 127 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 128 | 30 mm thick |
| 129 | MR Items |
| 130 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board , in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. (12mm thick prelaminated particle board flat pressed three layer or graded wood particle board shall be supplied by department free of cost ) |
| 131 | Supply of anodised alumunium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285 of approved make as per direction of Engineer-In-Charge |
| 132 | Repairing of damaged false ceiling made of aluminium tee / angle frame and 12 mm thick particle board by complete including leveling with necessary new aluminium cleats and screws wherever required all complete as per direction of Engineer-In-Charge. ( Supply of new alumunuim Tee / angle sections , cleats and provision of new suspenders, dash fasteners if required shall be paid separately) |
| 133 | Providing and laying fibre glass tissue reinforcement Type II Grade I in roof water proffing treatment all complete. ( Finished area of water proofing shall be measured for payment ) |
| 134 | Providing and fixing stainless steel SS-304 towel stand 600 mm long of approved quality with necessary PVC sleave and screws all complete |
| 135 | Providing and fixing C. P. brass health fauset with PVC flaxible pipe 1.0 metre long of approved quality with necessary PVC sleave and screws all complete |
| 136 | Providing and fixing Stainless steel SS-304 floor drainer 6\\" x 6\\" size of approved make all complete as per direction of E-I-C. |
| 137 | Providing and fixing Stainless steel SS-304 toilet paper holder of approved make all complete as per direction of Engineer-In-Charge |
| 138 | Providing and fixing 300 mm stainless steel SS-304 'C' type handle with necessary screws etc all complete as per direction of Engineer-In-Charge |
| 139 | Providing and fixing 250 x 16 mm stainless steel SS-304 sliding door bolts with necessary screws all complete as per direction of Engineer-In-Charge |
| 140 | Providing and fixing 250 x 10 mm stainless steel SS-304 tower bolts with necessary screws all complete as per direction of Engineer-In-Charge |
| 141 | Providing and fixing 150 x 10 mm stainless steel SS-304 tower bolts with necessary screws all complete as per direction of Engineer-In-Charge |
| 142 | Providing and fixing stainless steel SS-304 floor door stopper with necessary screws all complete as per direction of Engineer-In-Charge |
| 143 | Providing and fixing white vitreous china extended wall mounting water closet (Kerovit KS106 model or equivalent model as approved by Engineer-In-Charge) of size 655x360x750 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting including seat cover and cistern fittings, nuts, bolts and gasket etc complete. |
| 144 | Providing and fixing white vetrous china counter type wash basin of size 600 x 460 mm including vanity, mirror with cabinate (Kerovit model No KAJ 0520 S or equivalent brand and specification as approved by Engineer-In-Charge) , deck mounted C.P brass wash basin tap , C.P. waste 32 mm dia and C.P. brass bottle trap 32 mm dia all complete as per direction of Engineer-In-Charge. |
| 145 | Providing and fixing 32 mm dia PVC pipe for drainage of wash basin waste / AC waste water including cutting wall and making good the wall complete as per direction of Engineer-In-Charge |
| 146 | Credit for using old serviceable bricks obtained from dismantling |
| 147 | Credit for unserviceable aluminium sections obtained from dismantling Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender