Tender For Construction Work Of 2 Classrooms With Verandah In Raupraavi 13 Kyd
Tender Value
20 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
2 days left
EMD
40000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of 2 Classrooms With Verandah In Raupraavi 13 Kyd
BOQ
| Sl. No. | Item Description |
| 1 | Digging soil up to 1.5 depths in the foundation, ditch, barn, crushing the bottom, pouring water, grooming the armpits, removing the carved soil, refilling the empty places with soil after filling the foundation and removing the remaining soil for a distance of 50 meters. 2A |
| 2 | Cement concrete foundation or floor 40 mm. The stone of the renowned measure is to be poured into the limestone ballast /brick soil, cement-sand masala in the ratio of 1 cement : 5 sand : 10 ballast and cutting, including lowland. 9A |
| 3 | Foundation and chair first class brick masonry cement - gravel in 1:6 spices, including bunding and lowland. 20A |
| 4 | खुदी हुई मिट्टी, टीलों या नले में से, 1.5 मीटर उठान या 50 मीटर तक ले जाना तथा समतल करना। |
| 5 | मिटटी का विभिन्न दूरी के लिए परिवहन सामग्री को चढ़ाना, उतारना व स्टेकिंग सहित | (परिवहन की लम्बाई निकटतम रूट से गणना की जावेगी न कि सड़क मार्ग से) |
| 6 | Cement Concrete 1:1.5:3 Pouring and supplying the mixture into the reinforced cement concrete, pressing in roof slabs, balconies, beams, lintles, etc., etc., but the cost of steel and shuttering, including restrictions, etc., and leveling the surface with 1:3 cement spices, etc. 13B |
| 7 | अतिरिक्त राशि अधिरचना में चिनाई कार्य में 4.5 मीटर ऊंचाई तक कुर्सी स्तर से। |
| 8 | The work of cutting, folding and placing and tying iron for RCC work is done to supply.61 |
| 9 | R.C.C. of The Centering'Shuttering (Plank and Execution) Installation of roof, slab, balcony, lint etc. up to a height of 4.5 meters and removal etc. as per special details. 93B |
| 10 | 1:4 cement gravel spices in thickness 20 mm, polished kota stone floor, skating and grinding (minimum 3 times) and filling the joints with a cement solution etc. 67A |
| 11 | सफेद रंग के चमकीली चाईना मिट्टी की टाईलों की आपूर्ति करना तथा प्लास्तर के ऊपर सीमेंट स्लरी से लगाना तथा जोड़ों में सफेद सीमेंट लगाना (प्लास्टर की कीमत शामिल नहीं है)। मोजाइक टाइल्स 40 mm मोटी |
| 12 | 20 mm Thick Cement plaster is mixed with cement-gravel in the ratio of 1:6 on the wall and crushing the joints and regularly for 14 days. 77B |
| 13 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: 12.40.1 Two or more coats on new work including prepartion of basewith primer, putty, lippy etc complete in all respect. |
| 14 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. PWD BSR 12.42 |
| 15 | A 40X40X3 mm exterior of konia iron (angle iron) has a 22 gauge plain GI. 2-pallet doors of the mattress supplied in a 25X25X3 mm konia iron frame and fittings such as argal sliding volts, stings and grip straps etc. 85 B |
| 16 | Providing and fixing steel glazed window frame made out of80x40 mm hollow sheet section of 16 gauge thickness, jointmitred welded and grinded including hold fast of steel lugs13mm x 3mm and 15 Cm long embedded in C C block 15 x10 x 10 Cm of 1:3:6 nominal concrete and including fixing ofpivoted hinges of superior quality, window shutters made outof 50 x 25.0 mm hollow steel section 15 mm paitam of 18gauge thickness, joint mitred and grinded including 10mm x10mm square bars welded to frame for paitam fixing floatglass 4mm thick panes with glazing clips and metal sash puttyand fixing of shutters frames peg stay, U shape handle 100mm long, tower bolts 100 mm long of steel powder coatedsuperior quality including fixing and jointing with framehinges priming coat with steel primer complete in all respectas per direction of Engineer-in –charge9.28.1 Window openable. PWD |
| 17 | Installation and supply of iron mesh 14 mesh, 24 gauges in the iron window and tightening of the screw by installing it with 20 X 3 mm beading. Analysis 1.2 X 0.60 m for a window size 0.72 m2 88 |
| 18 | Light Point/Fan Point/ Exhaust Phen Point/ 1.5 sq mm for the Kal Bell Point. FR PVC insulated copper container is made from single core cable, modular switch, modular plate, suitable GI box and 1.5 sq mm. FR PVC Insulated Copper Conductor Medium grade PVC conduit wiring in surface/empty space as required including earthing from single core cable 94 |
| 19 | 110 mm diameter PVC. Other necessary materials including pipe insertion 181 |
| 20 | Coating the prize panel into 3 layers so that there is a single aura (to give even shade) to create an even surface on the new task/ old work.82A |
| 21 | P&Fof capacitor start,metal body,metal blade three speed wall mounting fan of following sweepwith the help of anchor bolts includingmaking connection testing etc. as required. PWD BSR E171301 |
| 22 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC |
| 23 | NAME BOARD Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender