Tender For Balana - Providing Sewearge Facility And Sewage Treatment Plant At Vill. Balana Distt. Panipat Balana
Tender Value
10.29 Crore
Estimated cost
Bid Submission
19 Oct 2026
21 days left
EMD
20.58 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balana - Providing Sewearge Facility And Sewage Treatment Plant At Vill. Balana Distt. Panipat Balana
BOQ
| Sl. No. | Item Description |
| 1 | NS ITEMS |
| 2 | Providing and Fixing PVC insulated 10 sq. mm copper wire 3.50 core ISI mark for connection of Induction motor including thimble and jointing complete in all respect. |
| 3 | Providing and Fixing PVC insulated 16 sq. mm copper wire 3.50 core ISI mark for connection of Induction motor including thimble and jointing complete in all respect. |
| 4 | Supply, erection, testing and commissioning of wall mounted electrical panel board with bus bar, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm and 400 mm deep having following accessories:- ( Suitable for 2 no. 20.00 BHP centrifugal horizontal spilit casing induction Motor ) (a) Main switch 150 Amp.1 Nos.. (L and T Siemens, ABB).(b) CT 100/5 Nos. (AE/KAPPA/ LandT) (c) Digital Multi Function meter = 2 no. (d) SPP 1 No. of approved make (e) Motor starter, star delta 3 Nos. (LandT Simens, AAB) (f) VSS 1 No. and ASS 1 No. of approved make (g) Capacity KVAR as per site requirement = 3 No.(h) Indicating Lamp-One Set(i) Change over switch 150 Amp. = 21 No. each |
| 5 | Supply ,erection,testing and comissioninghorizontal non-clog sewerage pump 1500LPM x 35 mtr.Head with 20.00 BHPinduction motor and complete all accessories |
| 6 | Construction of HT/LT Panel room, including doors, window and fitting with toilet block including sanitary fittings etc. at MPS covered area with RCC framed structure of brick work vitrified glaze tiles flooring, powder coated aluminum frame of size 100mm x 45mm of 10 gauge for chowkhat frame, 75mm x 45mm of 10 gauge for door frame, 45mm x 45mm of 10 gauge for window frame, 5mm thick glass AIS/Saint Gobin/Modi Float, covered area 50 sqm. |
| 7 | Construction of HT/LT Panel room, including doors, window and fitting with toilet block including sanitary fittings etc. at STP covered area with RCC framed structure of brick work vitrified glaze tiles flooring, powder coated aluminum frame of size 100mm x 45mm of 10 gauge for chowkhat frame, 75mm x 45mm of 10 gauge for door frame, 45mm x 45mm of 10 gauge for window frame, 5mm thick glass AIS/Saint Gobin/Modi Float, covered area 50 sqm. |
| 8 | `CC TV CAMERAS: Providing and Installing 6 CCTVCameras (4 Cameras for STP and 2 Cameras for MPS)complete as per satisfaction of the Engineer-In- Charge,within 96 hours of signing the Agreement along with 90 daysrecording (DVR), 32 inch LED Screen, 16 Channel DVR atSTP Site and 8 Channel DVR at MPS Site with connectors,cables, poles and power supply with online real-time outputfacility. The cameras at both the sites i.e. MPS and STP shallbe synchronized at STP site.At STP and MPS Site- 1 No. PTZ speed dome 360 degree50X zoom camera, 3 No. 12 mm lens size, 1 Nos. 3.6mm lenssize.`Make: CP Plus Internet Protocol minimum 5 MP WDR, Nightvision color mode 2.4.2 12 mm very focal with extra IR, CCTVCameras should be installed and commissioned beforestarting execution of work |
| 9 | SEWAGE TREATMENT PLANT `Design, construction, erection, testing and commissioning of 1.00 MLD capacity Sewage Treatment Plant based on Sequential Batch Reactor (SBR) Technology complete in all respect including. Landscaping, MCC Panel Room and all other contingent Electrical, Mechanical, Electromagnetic Flow Measurement Device on inlet and outlet, Real Time water quality monitoring with Data collection system (Online analyzer) Piping and Instrumentation works with PLC and SCADA Arrangement for STP and MPS along with Synchronizing it with each other Including furniture and laboratory equipment as per detail given in the bid document and including following components. 1. 2 No. High Mast of 9 mtr. GI Octagonal pole of 4 mm thickness (T=100 MM, B=200 MM, Base Plate320x320x20mm), window at 500 mm from Base Plate) 12 Nos. Providing and fixing of Solar light 30 watt with dark and motion sensor, 2 level intelligent dimming after 3 and 6 hours of operation, IEC certified solar panel, LM80 certified LED, IP 65 complaint design to protect from rain and dust and UL certified lituimion battery with 2 year system warranty of 6 Mtr. GI pole complete in all respect, along the road and path complete in all respect. 2. Supply and installation of 1 No. Main Gate of (MS) 3.65 m wide main gate and 1.25 m wide wicket gate (total weight not less than 500 kg at STP site. As per satisfaction of Engineerin-Charge. 3. Providing and installing 2 No. centrifuges (1working plus 1 Stand bye) including centrifuge feed pump, all fittings. instrumentations, electric panel board etc. as per design complete in all respect, including packing dry sludge in 20 kg Bag and supplying the same in Market Kisan Sewa Kendra or as directed by Engineer-in-charge within lead as posited as clause 4.4.5 of NIT. including Operation and Maintenance cum defect liability period for 06 years after successful completion of 3 Months trial run period. |
| 10 | ONLINE OUTLET EFFLUENT WATER QUALITY MONITORING SYSTEM- Supply, Installation, Testing, Commissioning, of effluent quality monitoring system at 1.00 MLD capacity STP for online (continuous) measurement of PH, Total Suspended Solids (TSS), Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) by single analyzer with various sensors (spectral measurement in the UV-VIS range 200-720mm) performing reagent and chemical free analysis with automatic cleaning of censor, signal cables and power cables, local data acquisition and display of data on continuous basis for up linking the data to CPCB, HSPCB and PHED, TUV approved complete in all respect as per Central Pollution Control Board (CPCB) guidelines for online continuous monitoring system for effluents and as contained in scope of work in the DNIT. a) Multi-parameter measuring converter, for connecting up to 18 intelligent sensors Scope including 8 analog inputs / outputs (4 inputs and 4 outputs) (0/4- 20Ma), wide- range power supply Optical COD/BOD and TSS probe with spectral processing of the UV-VIS range, for measurement in the outlet / effluent of 1.00 MLD capacity STP with integrated with automatic cleaning. b) Robust digital pH/ORP sensor for pH/ORP electrodes, with built-in preamplifier and temperature sensor with Automatic Temperature Compensation (ATC) Cable length 100 Meter (minimum). c) Sensor adapter cable for all intelligent sensors, with IP68 water proof connection to the intelligent Sensor Net system. Cable length 100 meter (minimum) d) Data transfer to CPCB, HSPCB and PHED servers. e) Providing GSM 3G, 4G modem with mobile network connectivity. including Operation and Maintenance cum defect liability period for 06 years after successful completion of 3 Months trial run period. |
| 11 | MAIN PUMPING STATIONS 1.00 MLD Design, construction, erection, testing and commissioning of MPS and following components . (i) RCC Inlet chamber, Screen Chamber, rectangular collecting tank suitable size for 1.00 MLD average flow with peak factor of 3.00, landscaping of the campus providing and installing of 5 No. Pumping Set of i.e. (ii) 1 no. 1800 LPM , 2 no. 700 LPM and 2 no. 400 LPM with 30 mtr. Head each suitable LT panel equipped with all safety devices, automatic capacitor bank and submersible cable form LT panel to pump sets complete in all respect. (iii) K9 DI pipe of suitable dia at MPS including welding and screwing of flanges, ISI marked D.I. fittings, Sluice valves, Flow measurement devices as per requirements complete in all respect. (iv) 3 Nos. CI Gear Operated Sluice Gate with SS Spindle (SS 410) and seats (SS 304) (2 nos. for screen and 1 no. for partition of collecting tank) as per design.(v) Supply and installation of 2 Nos. mechanical course screens of minimum length 6 mtr for 1.00 MLD average flow with peak factor of 3.0:-i) The connecting sewer of same diameter and material of construction, laid at adequate depth between existing sewers to newly constructed structures is included in this scope of work.ii) All the infrastructure except construction of staff quarter, and path ways/ roads required to be executed at site to make the MPS functional is included in the scope of work for lump-sump job.iii) All the pumping machinery, panel board, Level sensor etc shall be controlled by PLC and SCADA and shall be synchronized with PLC panels at MPS site through broadband internet facility.iv) The size and quantities of all the above components will be as per approved structural/ Hydraulic / Mechanical/ Electrical design to be approved by Department before actual execution of work including Operation and Maintenance cum defect liability period for 06 years after successful completion of 3 Months trial run period. |
| 12 | Operation and Maintenance cum defect Liability period for 6 Years after successful completion of 3 Months trial run period for complete scope of work mentioned in DNIT i.e 1No. Tube well, Distribution system, 1.00 MLD STP and their associated Civil Structures, Pumping Machineries, Head works pipelines, Civil/Electrical/Mechanical complete in all respect. The cost will be charged to Annual Maintenance estimate. |
| 13 | HSR ITEMS |
| 14 | ALL HSR ITEMS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender