Tender For Supply ,Installation And Commissioning New Gas Chlorination System Plant At Kattuparamakudi Head Water Works
Tender Value
8.50 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
10 days left
EMD
8500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramanathapuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply ,Installation And Commissioning New Gas Chlorination System Plant At Kattuparamakudi Head Water Works
BOQ
| Sl. No. | Item Description |
| 1 | Supply ,installation and Commissioning New Gas chlorination system Plant the following items including one year service maintenance all cost and conveyance of materials to site as per standard specifiction |
| 2 | 01. Pressure reducing valve including IS: 2062 steel Body, High tensile body bolt, Brass loading screw PTFE Diaphragm, seat spring steel cadmium plated Top spring Has alloy “c” silver plated Bottom spring, Glass filled PTFE Spindle etc |
| 3 | 02. Flexible copper connector tube 9.5mmO.D x 2.0M x 16swg, I.S – 191, including adapter IS – 319 both sides Brass Bush and Nut etc |
| 4 | 03.Supply & delivery of chlorine key |
| 5 | 04.Pressure gauge (0-16kg/cm2) including S.S casing 100/150mm Dia, S.S 316 with silicon oil sensing Element, Aluminum Die cast case, Stainless steel (S.S 304) movement isolation valve IS: 3224 Connector IS: 2062 filling sealed Diaphragm etc |
| 6 | 05. Chlorine gas flow Rota meter including glass tube with float,Stopper Spindle, Top nut, Bottom luck nut, with Rubber gasket With fittings |
| 7 | 06. Supply & delivery of Teflon washer 50mm length x 50mm breath x3mm Thickness |
| 8 | 07. Chlorine flow pipe line small equipment supporting clamp |
| 9 | 08. Gas filter including ASTM A 106 Gr.B Seamless CS 80 Sch body ASTMA 105 SORF Flange carbon steel holdup rod IS 2062 bottom Flange Antimony lead gasket Glass wool filter media silversides wire Mesh cartridge screen etc. |
| 10 | 09. Supply and delivery of Manifold frame including Support frame IS A size channel 75mmx40mmx6mm length 1500mm x width1000mm x height 1000mm and bottom Support plate 240mm x 220mx 20mm thickness and necessary foundation bolt with civil work |
| 11 | 10. Supply and delivery of Manifold frame including Support frame IS A size channel 75mmx40mmx6mm length 1000mm x width1000mm x height 1000mm and bottom Support plate 240mm x 220mx 20mm thickness and necessary foundation bolt with civil work |
| 12 | 11.Galvanised full thread Bolt and nuts with washer size 19mm x2 ½”- 40Nos |
| 13 | 12. Galvanised full thread anger pass Bolt and nuts with washer size 12mm x100mm - 20Nos |
| 14 | 13. 1No MS Valve producing Dome For the technical specificationof Empty Chlorine Container Supply and delivery at your site Capacity of 100kgs including cost of cylinder and obtain necessaryTesting certificate from the chief controller of explosive (CCE) Nagpur chlorine gas filling permission certificate- 3Nos |
| 15 | 14.Chlorine filling cost |
| 16 | 15.Poly propylene non return ball valve size 1 inch fe maleThreaded with necessary fittings etc. |
| 17 | 16.Husaini Engineers continuous monitoring single channel chlorine gas leak detection System with digital readout & alarms (CL 9206) Model 9206 Display unit + WP98 FLT CL2 Sensor transmitter +Hooter Sensor Transmitter – Model WP 98FLT Sensor: Electrochemical / 2 wire board Measuring range: 0 -100 PPM with lock Min Detectable range :0.10PPM Display unit (control module) – Model 9206 scanner Mounting: wall mount type for mounting in local /central control rooms Display: Independent digital display of reading, calibration functions, alarm settings & Diagnosis functions Range: 0-100 ppm with lock, Alarm set points: alams, user settable, Relays: SPDT , 5 Amp , 230 volt AC max.resistive and indicating electrical fault of the Sensor, Analog signal output: 4 -20 Ma , Enclose :NEMA 4X wall mount |
| 18 | 17.Chlorine sensor board installation company technician labour Charges for travelling, boarding expenses |
| 19 | 18.Supply, Delivery, Fabrication and proper construction of gas Chlorination in Mani Nagar –OHT bottom room size 11feet length x 11feet height x 11feet breath in top side roof galvanized iron Sheet with proper angle for chlorination system and chlorine cylinder, Inside the room the same above size plate form bed bottom civil Work and top sides covered with galvanized sheet and three sides Covered weld mesh with door and required angle it will be fabric Cated with mild steel square pipe size Coolum pipe size 100mm x 100mm square pipe , Praline square pipe size 50mm x 40mm , four sides weld mesh support Square pipe size 40mm x 40mm x 6mm thick ISI Mark square pipe to be fabricated the squre /pipe support, bottom proper Concrete and one coat of red oxide with primer including all costs Such as welding, grinding and fabrication charges cost and conveyance of all materials to site etc. complete |
| 20 | 19.Chlorine absorption tower PVC coated F.R.P. body 250mm Outer dia and 1930mm Height with round flange along with Rubber gasket set. -1No |
| 21 | 20.Frame mounted FRP cabinet for rota meter support - 1No |
| 22 | 21.All chlorine gas flow pipe line and equipment Painting for chlorination systems |
| 23 | 22.Pressure gauge, vacuum gauge connector – 3Nos |
| 24 | 23.Liquid Ammonia solution 500Ml for chlorine leak test |
| 25 | 24.Chlorine test kit for dissolved chlorine in the water Testing 500 ml |
| 26 | 25.Chlorine Tonner valve to chlorine system copper tube connecting ATC clamp set -1No |
| 27 | 26.Poly propylene Check valve for Absorption Tower chlorine gas inlet – 1No |
| 28 | 27.Bubbles for chlorine Mixing Chamber P.P saddle for Absorption tower – 6bags |
| 29 | 27.From OHT to clear water sump delivery 40 meters UPVC pipe line connection to Absorption tower and crude Chlorine solution Dozing to GLR necessary fittings, valve, Union, earth work complete Material with labor, transportation |
| 30 | 28.Flow control valve including pvc bottom housing ring gasket And top housing, spindle, gland hand wheel, Viton rubber Gasket O ring and brass chromium plated screw etc |
| 31 | 29.Supply and delivery of Auxiliary container valve including Monel 400 spindle, brass IS 319 gland and nut, PTFE gland packing forged ALSI bronze valve body and packing coller etc |
| 32 | 30.Labor charges for welding, cutting, lath work, service/ Spare parts re placement and commissioning of gas chlorination Unit With proper and Make it to running condition |
| 33 | Provision for GST 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender