Tender For Construction Of Collection Centre And Compound Wall At Arasamara Street In Ward No 28 North Zone Roc No. 1692/2026/Md2
Tender Value
29 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
12 days left
EMD
29000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Collection Centre And Compound Wall At Arasamara Street In Ward No 28 North Zone Roc No. 1692/2026/Md2
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick or stone in cement mortar walls under 3mtr height including all charges etc complete as per the directed by the departmental officers |
| 2 | Earth work excavation and depositing on bank within initial leas of 10m and initial lift of 2 metre in hard stiff clay stiff black hard red earth shales murums gravel stoney earth and earth mixed with small size boulders and hard gravelly soil etc complete complying with standard specification |
| 3 | Re filling including watering and consolidation cost and conveyance of all materials and labour charges etc complete |
| 4 | CEMENT CONCRETE 1:4:8 (One cement, four sand and eight aggregate) using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification. |
| 5 | Supplying and erecting SHUTTTERIN incusing necessary supports for plane surfaces such as RCC COLUMN FOOTING, PLINTH BEAM STAIRCASE STEPS etc., in all floors using mild steel sheets of size 90cm * 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarina props at suitable intervals etc., complete complying with standard Specification and as directed |
| 6 | Supplying and erecting CENTERING for sides and soiffts including supports and strutting upto 3.29m high for plane surfaces such as RECTANGULAR COLUMNS, top and bottom slabs of boxing, sill slabs, sunshades etc., in all floors using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over countrywood joists of size 10cm * 6.5cm spaced at about 90cm centre to centre and supported by Casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete as directed. |
| 7 | Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOCKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over countrywood joists of size 10cm * 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed. |
| 8 | R.C.C, 1:1.5:3 Mix (One cement one point sand Three hard broken granite stones) for all the reinforced cement concrete works using 20mm gauge hard blue granite stone jelly including cost and conveyance of all materials to site including all labour charges for concrete mixing, laying, watering curing properly excluding cost of steel and centering etc., complete complying with standard specification. |
| 9 | Ground Floor |
| 10 | Supply fabrication and placing imposition of mild steel for steel rod of various sizes as directed inc |
| 11 | Fly ash brick work in CM 1:5 (one cement & five sand)using size 9\\"X43/8\\"2 3/4\\" including finishing curing etc complete complying with standard specification |
| 12 | Filling with well gravel layers of not more than 30cm thick, well rammed watered and compacted complying with standard specification etc complete |
| 13 | Ceiling plastering with C.M. 1:3 mix (one cement and three sand)10mm thick finishing including cost and conveyance of all materials to site and all labour charges watering curing and all other incidental charges etc complete complying with standard specification |
| 14 | Plastering with C.M 1:5 mix (one cement and five sand)12mm thick finishing including cost and conveyance of all materials to site and all labour charges watering curing and all other incidental charges etc complete complying with standard specification. |
| 15 | paving the floor with descrged coloured vitrified tiles of size 600 x600x8mm of best quality and approved variety complying/confirming ISI specification land over cement mortar 1:3 (one cement and three sand)20mm thick and pomted with same coloured cement neatly etc complete |
| 16 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (PSand)), 20mm thick laid in-situ and pointed with same coloured cement neatly etc., complete. |
| 17 | Supplying and fixing of AC Rainwater down fall pipes 10 cm dia with necessary specials, bend, clamp, screw, nails TW Plugs etc |
| 18 | WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.5 by volume and laid in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinkling lime Jiggery water as per standard specification etc., complete as directed by the departmental officers. |
| 19 | Supply and fixing of mild steel door using all round \\"L\\" angle 25 X 25 X 6mm thick, cross bracing 20 X 6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc., Size : 0.60 X 1.85 |
| 20 | Solid PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fix in position including necessary furniture and fittings. The cover all size of top rail, Lock rail and bottom rail shall be 7Omm x 45mm, with suitable rebate for housing the shutter |
| 21 | Painting with enamal paint two coats for new iron work incuding one coat of priming coat and using the best qulity iron primer and best quality synthetic enamel paint etc complete complying with standard specification |
| 22 | Painting with plastic emulsion paint two coats over base coat for new plastered surface for using best quality and approved colour of oil bound distemper conforming to ISI specification etc., complete complying as directed by the departmental officers as per standard Specification . |
| 23 | Supplying and fixing in position white colour glazed Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with Cl ! pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid Pvc black seat and seat cover with CP brass hinges including cost. |
| 24 | supplying ane Fixing In position of indian make White glazed earth ware WASH BASIN 550mmx400mm with all accessories such as costiron brackets , 32mm dia C.P waste coupling 15mm dia G.M wheel valve ,15mm dia Nylon connection , 15mm dia Brass nipples 15 m C. P pillar tap etc complete |
| 25 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (5OOV)32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW creepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. |
| 26 | wiring with 2x1.5sq mm (22/.3) PVC insulated SC unsheathed copper conductore cable of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in flush with wall with 150mmx100mmx75mm MS switch box with 3mm thick hylem sheet cover for 5A 3pin interlocking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed |
| 27 | Supply and fixing of WT bulk head fitting with guard (Phillips/Bajaj/Crompton/K.Lite) Suitable for incandescent lamp with 11 Watts CFL Bulb Bulb |
| 28 | Supply and fixing of single box type 4\\"40W flu fitting completed |
| 29 | with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fittin: with Tube |
| 30 | Supplying and fixing of 1200mm(48\\")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm 16\\" |
| 31 | Supplying and fixing of 15 A aerial fuse unit (SOOA)on suitable 100x100 mm TW concealed box with iron sheet on the tapping pole with necessary clamps. |
| 32 | Earthing as per the ISI specification with an earth electrode of 1 1mt class B GI pipe of dia not less then 40mm with copper earth plate of size 125mmxS5Ommx6mm, with necessary funneling arrangements with necessary masonery work and with 38mm RCC cover slab for the brick masonry |
| 33 | Supplying and fixing of HDPE water tanks with suitable specials including cost of materials to site and all other labour charges etc |
| 34 | S/F OF CUDAPPA SLAB of approved quality and colour of size all floors over 40mm thick cement mortar 1:3 (One cement and | three sand) base above the existing bed concrete and pointed | with same color cement added. |
| 35 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the 7 hutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, securityprotective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 36 | Supply and fixing of 1HP Motor with pumpset as per standard qualityas per the direction of the departmental officers etc complete |
| 37 | Conveyance of surplus earth from work site to city outer wit average lead of 15km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender