Tender For Special Repairs To The Existing Road, Office Building And Gangmen Shed In Tncsc Godown C Us At Naickanoor Village In Vaniyambadi Taluk In Thirupathur District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Oct 2026
5 days left
EMD
15800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirupathur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To The Existing Road, Office Building And Gangmen Shed In Tncsc Godown C Us At Naickanoor Village In Vaniyambadi Taluk In Thirupathur District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Brick / stone masonry in cement mortar walls under 3m height for any thickness of wall and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers |
| 2 | Clean removal of Cement plaster from walls and clearing away as directed by the departmental officers. |
| 3 | Dismantling floor finish with cuddapah slabs and dadooing the walls with glazed tiles / mosaic tiles and carefully stacking materials useful for re-use as directed by the departmental officers. |
| 4 | Dismantling the doors and windows including removal of frames, hinges and fastening etc., complete and carefully stacking materials useful for re-use as directed by the departmental officers. |
| 5 | Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with initial lead of 10 mts and initial lift of 2 mts. Clearing, leveling the site, shoring, strutting, bailing of water wherever necessary etc., complete complying with standard specification and as directed. |
| 6 | Supplying and filling in foundation and basement with Crushed stone sand in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed. |
| 7 | CEMENT CONCRETE 1:5:10 (one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including mixing by mechanical means de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 8 | Providing RCC fencing post of size 0.15x0.15 at bottom 0.10x0.10M at top 2.40M height with RCC 1:2:4 (One cement two sand and four aggregate) using 20mm stone jelly including cost of necessary earth work excavation, sand filling, Cement concrete 1:5:10, centering cost of steel, fabrication of reinforcement including moulding charges finishing, curing etc complete as per standard specification and as directed by Corporation officers. |
| 9 | BRICK WORK in cement mortor 1:6 (one cement, six sand) using best quality of burnt clay bricks of size 8” ¾”x4 ¼ x 2 ¾” for walls including cost of scaffolding curing, finishing etc., complete complying with standard specification and as directed by the departmental officers. |
| 10 | PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including mortar plasticizer at 200ML per 50kg of cement used cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed by the departmental officers. |
| 12 | Servicing the rolling shutter of size 1.80mx2.60m incondition including labour charges for servicing Greasing, changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc., complete as directed by the departmental officers. |
| 13 | Supplying and fixing UPVC (Un-Plasticized Polyviny Chloride ) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash an outer frame that enables opening of the window. The window should be fized to the wall the 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. |
| 14 | FLOOR FINISHING with semi polished cuddapah slab over base concrete and laid over cement mortar 1:3(one cement and three crushed stone sand) of 40mm thick with required cement slurry and mortar plastcizer including pointing the semi polished cuddapah slab with cement mortar 1:3 to full depth and directed. The semi polished cuddapah slab shall be of size 60cm x 45cm for a thickness of 40mm machine cutting on all sides and top surface semi-polished. The Tolerance for thickness shall not exceed + 10%(Rate includes cost of all materials). |
| 15 | ufacturing supplying and fixing of fully paneled steel door with the following specification MS angles of size 40x40x6mm are used for the outer frames and M.S angle of size 35x35x5mm for the shutter frames, stiffeners with 32x6mm MS flat prvoided a required intervals in the shutter frame 18 gague CR sheet laid as panel in the shutter and welded intact MS flat 18x5mm is welded over the 32x6mm M.S flat sandwitching the C.R sheet in between additional stiffeners with 18x5mm MS flat is provided diagnonlly at the rear side of the shutter 3 nos of Steel partliament highes of size 125mm x150mm in case of single leaf and 6 nos of steel parliament highes of size 125mm x150mm in double leave shutter to be provided 6 nos of hold fasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos one at the top one at lock rail and the other at the bottom are provided on number altrop is provided at lock rail section in the doors 2 Nos of 200mm handle are to be provided. One rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S Flat 32x3mm at 1.1kg/m is provided on the one shutter conceal the gap between the two shutters at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work loading, un loading and all other incdidental charges etc., complete complying with standard specification and as directed by the departmental officers. |
| 16 | White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed. |
| 17 | Painting the walls with two coats ready mixed exterior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed. |
| 18 | Painting old iron works with two coats of synthetic enamel paint of approved quality and colour over the red oxide primer in all floor including cost of scaffolding, brushes etc., complete complying with standard specification and as directed. |
| 19 | Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 20 | Supplying and fixing in pofsition of best Indian make PVC Water Tank of 500 litres capacity confirming to ISI standards as directed by the departmental officers including cost of material and conveyance charges of material to work site etc., complete complying with standard specifications. |
| 21 | Supplying, laying and jointing 32mm dia UPVC pipes (having working pressure 10 kg / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on work. |
| 22 | Supplying, laying and jointing 25mm dia UPVC pipes (having working pressure 10 kg / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on work. |
| 23 | Supplying, laying and jointing 20mm dia UPVC pipes (having working pressure 10 kg / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on work. |
| 24 | Supplying 20mm dia UPVC Union ( with working pressure 10 kg / sq.cm) in water supply arrangements (both in internal and external water supply arrangements. |
| 25 | Supplying 20mm dia UPVC Elbow ( with working pressure 10 kg / sq.cm) in water supply arrangements (both in internal and external water supply arrangements |
| 26 | Supplying 20mm dia UPVC Tee ( with working pressure 10 kg / sq.cm) in water supply arrangements (both in internal and external water supply arrangements |
| 27 | Supplying 20mm dia UPVC Coupling ( with working pressure 10 kg / sq.cm) in water supply arrangements (both in internal and external water supply arrangements |
| 28 | Supplying 20mm dia UPVC Nipple ( with working pressure 10 kg / sq.cm) in water supply arrangements (both in internal and external water supply arrangements |
| 29 | Supplying 20mmx15mm dia UPVC reducer ( with working pressure 10 kg / sq.cm) in water supply arrangements (both in internal and external water supply arrangements |
| 30 | Supplying and fixing chain link fencing of size 50x50cm using 8 Gauge with Green colour PVC sheathing of best and approved quality including tying the post with 12 gauge GI binding wire to full height from ground level etc., complete as directed by the departmental officers. |
| 31 | GST 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender